Newbie with trouble with 328p HK multiwii minthrottle
Posted: Wed Mar 19, 2014 3:12 pm
Hey guys. Newbie to multiwii here. I am having issues with my quad that I hope you guys can shed some insight into.
My setup is 328p multiwii with DSM, f450 clone, 30a simonk ESC, 1000kv 2830, 8x4 props, and powered by 4s lipo. Pretty straight forward.
I've done the ESC calibration by using a harness to feed throttle channel to all the escs.
My question is, no matter what I set the minthrottle, the fc starts the throttle at 1150 when flying. And at 1150 signal, the ESC and prop makes the quad pretty much hover. So its very very difficult to bring the quad down to land. I'm pretty much down on the bottom of the throttle stick entire time, bumping into the zero throttle and quad wants to fall out of sky when that happens.
I do save the edited config.h and it compiles and uploads successfully... I've tried 2.2 and 2.3
I'm experienced in original kk, kk2, and APM series. This has been a very frustrating few days. Let me know what I should try.
My setup is 328p multiwii with DSM, f450 clone, 30a simonk ESC, 1000kv 2830, 8x4 props, and powered by 4s lipo. Pretty straight forward.
I've done the ESC calibration by using a harness to feed throttle channel to all the escs.
My question is, no matter what I set the minthrottle, the fc starts the throttle at 1150 when flying. And at 1150 signal, the ESC and prop makes the quad pretty much hover. So its very very difficult to bring the quad down to land. I'm pretty much down on the bottom of the throttle stick entire time, bumping into the zero throttle and quad wants to fall out of sky when that happens.
I do save the edited config.h and it compiles and uploads successfully... I've tried 2.2 and 2.3
I'm experienced in original kk, kk2, and APM series. This has been a very frustrating few days. Let me know what I should try.