Flight modes configuration with Turnigy 9X

This forum is dedicated to all issues and questions related to your individual setups and configurations
Post Reply
CSchulz
Posts: 11
Joined: Fri Aug 02, 2013 2:33 pm

Flight modes configuration with Turnigy 9X

Post by CSchulz »

Hello,

I want to use my Turnigy 9X to set the proper flight mode. On the front there is a switch called F.Mode (Aux 3, Mix).
I found an explaination how to configure the RC to use it with another switch http://diydrones.com/profiles/blogs/mod ... -turnigy-1.
But it seems that it isn't applicable for MW, is it? I am using the HK MultiWii Pro Board.

It would be nice to use two switches to cover 6 possible switch mixes.
Can anyone help me?

scrat
Posts: 925
Joined: Mon Oct 15, 2012 9:47 am
Location: Slovenia

Re: Flight modes configuration with Turnigy 9X

Post by scrat »

If you have Tg9X then give yourself a brake from original FW and flash your Tx with er9x or openTx and then you can set anything you want. With both FW you can set 4 flight modes...

er9x - http://code.google.com/p/er9x/ - FW for Tx
eePe - eeprom editor - http://code.google.com/p/eepe/
openTx - http://code.google.com/p/opentx/ - FW for Tx
companion9x - eeprom editor: https://code.google.com/p/companion9x/

CSchulz
Posts: 11
Joined: Fri Aug 02, 2013 2:33 pm

Re: Flight modes configuration with Turnigy 9X

Post by CSchulz »

Hello,

thanks for your answer. I will try it. :)

Post Reply