Esc's do not arm, in the GUI, MultiWii 1.9, the channels do not reach their limits 2000, only like 1600, with my endpoints adjusted to maximum. I'm using a dx18. The channels in the GUI are going crazy, up and down really fast, but short distances. I don't know what to do. My email is Johnjol399@aol.com. I fear if you answer me in here I may not find it. Thank you very much in advance for your help.
Sincerely, John Latza
Quadrino
Re: Quadrino
Flickering values usually means there's no common ground.
The whole system need the ground as a reference.
Check for bad connections...
The whole system need the ground as a reference.
Check for bad connections...
Re: Quadrino
Thank you very much, it took a lot, but I finally got it off the ground. I had to go into the configureH part of the software and change it, and a whole bunch of other things. Thank you for the response.