Hi,
I have try many setting of Magnetic axis, but I cannot have a correct magnetic axis directions. Following listed the axis directions of my quad. I have no idea what am I doing wrong, help!!!!
TILT the MULTI to the RIGHT (left side up):
• MAG_ROLL, ACC_ROLL and GYRO_ROLL goes up My Quad is goes up
• MAG_Z and ACC_Z goes down My Quad is goes down
TILT the MULTI forward (tail up):
• MAG_PITCH, ACC_PITCH and GYRO_PITCH goes up My Quad is goes up
• MAG_Z and ACC_Z goes down My Quad is MAG_Z goes up and ACC_Z goes down
Rotating the copter clockwise (YAW):
• GYRO_YAW goes up My Quad is goes up
The copter stays level:
• MAG_Z is positive ; ACC_Z is positive My Quad is positive
Diyboy
Help magnetic directions problem
- NikTheGreek
- Posts: 348
- Joined: Thu Dec 08, 2011 4:17 pm
- Location: Greece
- Contact:
Re: Help magnetic directions problem
Read this viewtopic.php?f=15&t=2440.. i think will help.
Re: Help magnetic directions problem
NikTheGreek wrote:Read this viewtopic.php?f=15&t=2440.. i think will help.
Hi NikTheGreek,
Thank for your help!
Diyboy