need some help setting up a new micro

[jy0933]

hey folks..... I decided to start with a micro instead of my huge x525 (that was a arf kit).. But I got no idea if these parts putting together will work or not? any suggestion/advice is appreciated

frame
Quad http://www.hobbyking.com/hobbyking/store/__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.html
Hex http://www.hobbyking.com/hobbyking/store/__24380__Turnigy_Integrated_PCB_Micro_Hex_KIT_.html

motor
it is suggested to use
1811-2900kv
http://www.hobbyking.com/hobbyking/stor ... oduct=8142

but i wonder if this one is going to be better
FC 28-05
http://www.hobbyking.com/hobbyking/stor ... oduct=5353


prop
gws hd 5x3
(or 5x3x3? ) im looking at a bit more flight time. about 15min?

battery
maybe 2kmah 2s?
http://www.hobbyking.com/hobbyking/stor ... ouse_.html

esc
hobbywing skywalker 20A.. (they came with x525 kit... probably juse use them first.. and get the better ones for x525 later)

fc: quadrino... hell yeah multiwii is it

again...appreciate any help

[bill516]

Basically I have found HK recommended items work as they should, so I would just go with what they suggest. Bottom line is do the motor props give more thrust than weight of completed copter. After that your into this item is better than that item.

[jy0933]

how about the efficiency and probably flight time? since im just beginner. i really'd like to have it fly longer.. and try/train acro... larger battery adds weight and flight time.... I wonder if I want loger acro time.. should I get large batt or several, say 1500, for change?


thank you

[bill516]

I wouldnt worry about long flight times to start with you will find a couple of minutes a long time when starting it out. It is unlikely that you will power up your copter and be in a stable hover at first try, you will more than likely need to go through trimming process. Have a search for, cant take off, or get into hover, quad flips on power, noob need help that sort of theng threads how to go about setting your quad up is in there.