multiwii 2.0 gy_80 and mag

[fr3d]

hello I'm using an chinese gy_80 (adxl345 L3G4200 hmc5883 and bmp085) in gui L3G4200 and Adxl345 are ok,
hmc5883 is almost ok
I would like to set, for another application, north in same axis than the pitch axis for now it is 90°counterclockside.
can someone help me ?

[Katch]

correct setting are in this thread

viewtopic.php?f=8&t=1598

and are also available in the current multiwii_shared on the google code page.

[fr3d]

correct setting are in this thread

viewtopic.php?f=8&t=1598

and are also available in the current multiwii_shared on the google code page.

I have already read it but you didn't reply to my question.
how to change orientation i would like to face pitch axis front of North. it is not the case for me, even with your defines.
thx.

[Katch]

you can override the defines by setting orientations at the bottom of config.h