hello I'm using an chinese gy_80 (adxl345 L3G4200 hmc5883 and bmp085) in gui L3G4200 and Adxl345 are ok,
hmc5883 is almost ok
I would like to set, for another application, north in same axis than the pitch axis for now it is 90°counterclockside.
can someone help me ?
multiwii 2.0 gy_80 and mag
Re: multiwii 2.0 gy_80 and mag
correct setting are in this thread
viewtopic.php?f=8&t=1598
and are also available in the current multiwii_shared on the google code page.
viewtopic.php?f=8&t=1598
and are also available in the current multiwii_shared on the google code page.
- fr3d
- Posts: 97
- Joined: Sun Feb 06, 2011 11:21 am
- Location: Cappelle la grande near the ch'ti village
- Contact:
Re: multiwii 2.0 gy_80 and mag
Katch wrote:correct setting are in this thread
viewtopic.php?f=8&t=1598
and are also available in the current multiwii_shared on the google code page.
I have already read it but you didn't reply to my question.
how to change orientation i would like to face pitch axis front of North. it is not the case for me, even with your defines.
thx.
Re: multiwii 2.0 gy_80 and mag
you can override the defines by setting orientations at the bottom of config.h