AUX2 not working- Multiwii 2.0
Posted: Thu Apr 12, 2012 9:04 am
Hi There,
i just getting started and so far everything works except for AUX2.
I am using a Pro Mini on a WMC Board V2 from flyduino.
I tried PIN 8 & 12 but nothing works, the AUX2 stays at 1500 in the GUI. i changed AUX2 to PIN7 and AUX1 to PIN8, then i had to problem on AUX1.
I Also checked the reciver channels and they are working.
I uncommented #define RCAUXPIN8 in the config.h and in def.h i put in a 8 instead of the 0 for AUXPIN2.
I seems to me that the Software is ignoring the inputs at PIN8.
Can anybody shed some light on that issue ?
i just getting started and so far everything works except for AUX2.
I am using a Pro Mini on a WMC Board V2 from flyduino.
I tried PIN 8 & 12 but nothing works, the AUX2 stays at 1500 in the GUI. i changed AUX2 to PIN7 and AUX1 to PIN8, then i had to problem on AUX1.
I Also checked the reciver channels and they are working.
I uncommented #define RCAUXPIN8 in the config.h and in def.h i put in a 8 instead of the 0 for AUXPIN2.
I seems to me that the Software is ignoring the inputs at PIN8.
Can anybody shed some light on that issue ?