Select resonator frequency in MultiWii code

This forum is dedicated to all issues and questions related to your individual setups and configurations

Select resonator frequency in MultiWii code

Postby Pedro14755 » Mon Sep 05, 2016 5:18 am

Can someone please tell me in which MultiWii file/s the resonator frequency is set. I am using an FC that is using a Atmega32U4 running at 16mHz at 3.3v and want to experiment trying to run it at 8mHz so that the Atmega is not running overclocked.

Thanks for any help and/or suggestions overclocked
Last edited by Pedro14755 on Mon Oct 02, 2017 11:48 am, edited 1 time in total.
User avatar
Pedro14755
 
Posts: 42
Joined: Tue Jul 14, 2015 12:56 am
Location: Canberra Australia

Re: Select resonator frequency in MultiWii code

Postby gregd72002 » Tue Sep 06, 2016 3:38 pm

Have you passed the correct resonator frequency (cpu speed) to the compiler in the first place? To test this can you run a blink code on you 8MHz board?

This should start (not sure about working) with 8MHz
gregd72002
 
Posts: 103
Joined: Fri Dec 12, 2014 5:16 pm

Re: Select resonator frequency in MultiWii code

Postby Pedro14755 » Mon Oct 02, 2017 10:52 am

Sorry about the VERY LATE reply gregd72002 I must not have notifications set to email me when a reply is posted to my questions. I ended up running the Atmega32u4 at 5v / 16mHz which alleviated the overclocked situation when it was running at 3.3v
User avatar
Pedro14755
 
Posts: 42
Joined: Tue Jul 14, 2015 12:56 am
Location: Canberra Australia


Return to Getting Started - MultiWii config and setup

Who is online

Users browsing this forum: No registered users and 1 guest