Wont Liftoff

[kvn7500]

So I've completed everything and attempted my first liftoff. It was very anticlimactic as my quad stayed firmly planted on the ground. I have confirmed that my CR props are on my motors that are spinning CCW and my standard props are spinning CW however when I hold the quad and give it throttle it pushes down instead of wanting to lift. What do I have backwards? Im using the hextronic DT750s and my AUW is 1133grams with an 2200 25C lipo so Im generating enough thrust just in the wrong direction it appears.

[mr.rc-cam]

I have confirmed that my CR props are on my motors that are spinning CCW and my standard props are spinning CW

Review the published quad motor/prop diagram again for motor direction and prop installation details. I think you will see the problem.

[PatrikE]

sounds to me that you have put the props upside down.
Or if you mounted them right the props is spinning backwards.

/Patrik