Can't read freeimu

[lucaszanella]

I've just selected freeimuv043 in the sketch and uploaded. In the GUI when I press start I can read the PID info but when I press start in the gyro acc baro and mag sensors it can't read. A value at I2C error starts growing.

Here are the connections https://p.twimg.com/AvhOQMfCIAAGWpK.jpg:large with warthox shield



PLEASE HELP ME

[lucaszanella]

don't even the rx is being powered. Should I have to connect the battery to read all data?

[Katch]

that board needs to be powered for the IMU to work - plug in one of your ESC BECs when testing.