quad flips... lol

Post Reply
phibin
Posts: 10
Joined: Fri Jun 15, 2012 1:30 pm

quad flips... lol

Post by phibin »

im a bit new to multiwii,
but thought i would share this little vid from the other night...

http://youtu.be/KT1OqMLIH1Y


simon.

User avatar
Th0rsten
Posts: 65
Joined: Mon Oct 31, 2011 10:28 am

Re: quad flips... lol

Post by Th0rsten »

Hi!

Could you post a screenshot of PID and Rate settings.
I tried to flip but it was to slow and ended in the grass.

Greetings...

chris ables
Posts: 317
Joined: Wed Feb 08, 2012 8:42 pm
Location: United states

Re: quad flips... lol

Post by chris ables »

Thorsten flips are easy ! Just hook to gui and set the rate box after roll and pitch to 0.25 , and also be sure your acc is off when trying flips ! That rate box makes it more touchy ! I also lowered my roll and pitch p value ! That makes it looser ! Do this only if you can fly good as it will get kinda touchy ! And if you lower those p values do it in small amounts until you find that sweet spot ! FLIP AWAY BOYS !!! :)

User avatar
Th0rsten
Posts: 65
Joined: Mon Oct 31, 2011 10:28 am

Re: quad flips... lol

Post by Th0rsten »

Thanks for the answer.
I set RC-rate to 0,75 because it's easier to control but it's to slow for flips. Will try adding the P&R Rate.
Roll and Pitch P is at 3.8 - seems ok for my quad.
I always fly in ARCO mode. ACC is for beginners. :)

chris ables
Posts: 317
Joined: Wed Feb 08, 2012 8:42 pm
Location: United states

Re: quad flips... lol

Post by chris ables »

You could also put thar rc rate on 0.90 and the expo box below it to 0.40 and that would make it not touchy near center stick and touchy at full stick! Expo is your friend when you set up an aggressive setting !

phibin
Posts: 10
Joined: Fri Jun 15, 2012 1:30 pm

Re: quad flips... lol

Post by phibin »

hello,

sorry for the late reply.

these are my settings, but they were a bit stiff for flipping...

also, here is a vid of same quad doing some fpv fun :)

http://youtu.be/7mYXIGZFRr8

simon.
Attachments
mwc settings.JPG
(39.29 KiB) Not downloaded yet

chris ables
Posts: 317
Joined: Wed Feb 08, 2012 8:42 pm
Location: United states

Re: quad flips... lol

Post by chris ables »

Cool vid ! That was a close call with that tree !

phibin
Posts: 10
Joined: Fri Jun 15, 2012 1:30 pm

Re: quad flips... lol

Post by phibin »

cheers mate :)

its good when someone enjoys it too...

the tree... which one???? LOL

dont know why i was feeling so brave?
i did build it to flown like i stole it though.. haha

it had 2 chipped props on and a broken arm from a double flip attempt.
glued it back on, but the super glue went off a bit to quick and the arm isnt even square really!

then the fpv and key cam taped to the top!

cant beat some cheep fun.

simon.

Post Reply