yaw setting need to go faster

[DimitriQX]

hello

ive have some problems
when i yaw left or right the quad turns to slow
some one have eny tips to make it turn faster

grtz

[mr.rc-cam]

Reduce Yaw PID values in the GUI.

[LenzGr]

Reduce Yaw PID values in the GUI.

Are you sure? In my case it helped to increase the yaw rate from 0.00 to 0.50 to make it turn much faster. I kept the default PID values.

[mr.rc-cam]

Good point, the yaw rate feature is used too. The basic method I use for setting YAW is to start with Rate at 0, adjust the PID's for the required stability performance, and then adjust the YAW Rate value. I rarely tweak the Rate, so out of sight, out of mind.