Everyone,
I need some guidance on what could be the cause as seen in the video.
I had flown one mission just before this flight on the same battery.
The quadcopter had an OSD-Navlink + camera + 5.8GHz transmitter and 3DR transmitter for telemetry on-board. I've flown the QC many times. The OSD was only recently mounted and the camera was new which was running on it's maiden flight before this one.
Battery still had 3.85 V after I checked the QC. Also there were no loose screws or loose props of any kind after inspection.
Any ideas what the cause could have been?
What happened here?
Re: What happened here?
It looks like unwanted software interrupt...... Floating input somewhere?
Best regards,
Rob
Best regards,
Rob
Re: What happened here?
I flew 2 battery packs yesterday and I couldn't repeat the behavior. I am quiet certain it's not hardware related. I've double checked the QC and couldn't find anything out of the ordinary.
I wonder if the PID's changed in-flight causing the oscillations? Maybe the MinumOSD interfered? I haven't a clue.
I wonder if the PID's changed in-flight causing the oscillations? Maybe the MinumOSD interfered? I haven't a clue.