Hi.
I m trying to find a way to use arduino in order to flash ESC.
Any one knows HOW ?
Thank you in advance.
Using Arduino to flash ESC
- NikTheGreek
- Posts: 348
- Joined: Thu Dec 08, 2011 4:17 pm
- Location: Greece
- Contact:
-
- Posts: 2261
- Joined: Sat Feb 19, 2011 8:30 pm
Re: Using Arduino to flash ESC
I personally have not had any luck getting an arduino to function as an ISP not to speak of flashing ESCs. I read that to get an arduino to work, it requires a capacitor I think pin 0 and ground, not sure of the right pin, it been awhile.
- NikTheGreek
- Posts: 348
- Joined: Thu Dec 08, 2011 4:17 pm
- Location: Greece
- Contact:
Re: Using Arduino to flash ESC
I've already ordered one of these
http://www.ebay.com/itm/1PCS-USBasp-USBISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-New-/261021924011?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D1813538669441418243%26pid%3D100015%26prg%3D1006%26rk%3D1%26
but..... i can't wait !!!
For the record i used arduino to flash Turnigy but in ESC case seems different..
http://www.ebay.com/itm/1PCS-USBasp-USBISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-New-/261021924011?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D1813538669441418243%26pid%3D100015%26prg%3D1006%26rk%3D1%26
but..... i can't wait !!!
For the record i used arduino to flash Turnigy but in ESC case seems different..
- NikTheGreek
- Posts: 348
- Joined: Thu Dec 08, 2011 4:17 pm
- Location: Greece
- Contact:
Re: Using Arduino to flash ESC
Thank you Ziss....
i ll try it tonight !!!
Re: Using Arduino to flash ESC
Hi,
a tutorial how to use the arduino as AVR ISP you find here: http://arduino.cc/en/Tutorial/ArduinoISP
I tried it to flash the bootloader to an arduino based I2C GPS, it worked fine.
a tutorial how to use the arduino as AVR ISP you find here: http://arduino.cc/en/Tutorial/ArduinoISP
I tried it to flash the bootloader to an arduino based I2C GPS, it worked fine.