In MultiWiiConf 2.1, what does "Save" actually save?
Posted: Sun Jul 22, 2012 8:34 pm
Does it just save PID and AUX settings, or does it save things not exposed in the GUI (like mag/gyro calibration, and acc calibration/trim)?
What about things that are not used? For example, some people were having problems with their copters yawing to one side when Mag mode was on, but then erasing the EEPROM using a tool from Arduino 1.0.1 fixed the issue. If I had the issue, wiped the EEPROM, and then reloaded my settings from a saved file, would it write out the individual settings, or would it restore an image of the old EEPROM?
What about things that are not used? For example, some people were having problems with their copters yawing to one side when Mag mode was on, but then erasing the EEPROM using a tool from Arduino 1.0.1 fixed the issue. If I had the issue, wiped the EEPROM, and then reloaded my settings from a saved file, would it write out the individual settings, or would it restore an image of the old EEPROM?