Hi ppl,
Even if I NOT going to use channels to control camera servos, It's mandatory to use PPM-SUM out receiver to fly Hexa or Y6??
I got one Crius MultiWii SE AIO board (v0.2 ) to my Y6 frame, but I only have a bunch of receives without PPM-SUM out.
Thanks!
PPM-SUM on Y6 is really mandatory ?
Re: PPM-SUM on Y6 is really mandatory ?
It's in config.h:
/* PIN A0 and A1 instead of PIN D5 & D6 for 6 motors config and promini config
This mod allow the use of a standard receiver on a pro mini
(no need to use a PPM sum receiver)
*/
//#define A0_A1_PIN_HEX
So the answer to your question is: No, its not mandatory.
/* PIN A0 and A1 instead of PIN D5 & D6 for 6 motors config and promini config
This mod allow the use of a standard receiver on a pro mini
(no need to use a PPM sum receiver)
*/
//#define A0_A1_PIN_HEX
So the answer to your question is: No, its not mandatory.
Re: PPM-SUM on Y6 is really mandatory ?
BIG THANKS
I didnt see this mod on config
I didnt see this mod on config