Connecting the PPM

Post Reply
Twitter6476
Posts: 1
Joined: Mon Feb 08, 2016 11:59 pm

Connecting the PPM

Post by Twitter6476 »

I have a MultiWii v2.5
I want to connect it to my receiver via PPM but I don't know which is the correct pin to use on the MultiWii. Can anyone please help?

Ciki
Posts: 19
Joined: Mon Sep 14, 2015 7:59 pm

Re: Connecting the PPM

Post by Ciki »

Hi. Connect PPM pin from the receiver (i have FRSKY D8RII-plus and it's channel 1) to pin D2 and uncomment one of this define line in config.h:
//#define SERIAL_SUM_PPM PITCH,YAW,THROTTLE,ROLL,AUX1,AUX2,AUX3,AUX4,8,9,10,11 //For Graupner/Spektrum
//#define SERIAL_SUM_PPM ROLL,PITCH,THROTTLE,YAW,AUX1,AUX2,AUX3,AUX4,8,9,10,11 //For Robe/Hitec/Futaba
//#define SERIAL_SUM_PPM ROLL,PITCH,YAW,THROTTLE,AUX1,AUX2,AUX3,AUX4,8,9,10,11 //For Multiplex
//#define SERIAL_SUM_PPM PITCH,ROLL,THROTTLE,YAW,AUX1,AUX2,AUX3,AUX4,8,9,10,11 //For some Hitec/Sanwa/Others
Let me know.

Ciki
Posts: 19
Joined: Mon Sep 14, 2015 7:59 pm

Re: Connecting the PPM

Post by Ciki »

See my post in general discussion. I made a guide on this argument.
Bye

Post Reply