I downloaded the multiwii version 2,4. While working in MultiWiiconf for some time the com port dissapeared and i have no idea how to get it back. Used to have COM 3, right now it shows nothing, i have everything hooked up correctly.
Any suggestions?
Ty in advance,
Alex
No com port
Re: No com port
Have you tried re-booting your computer?
Re: No com port
Kbev5709 wrote:Have you tried re-booting your computer?
Yes a few times, no results. http://imgur.com/g7TulVF (pic showing no com port) it says no port selected? How do i select one?
Tried if it was the usb port, or cable they are all good. Must be something i changed in the code or software... I think the next step is removing all the software and re-installing, hopefully that won't be needed.
Re: No com port
Have you checked in device manager to see if your board shows up? I don't think a re-install is a bad idea. If you go into device manager and your board is not there when it's plugged in physically, you might need to re-install. If you don't see something that says USB to UART Bridge Controller in the list you might want to re-do the software. I remember that fixed a similar problem I had when I first started. Do you have a USB port on the board you are using? Or is the processor a 328p?
Re: No com port
Kbev5709 wrote:Have you checked in device manager to see if your board shows up? I don't think a re-install is a bad idea. If you go into device manager and your board is not there when it's plugged in physically, you might need to re-install. If you don't see something that says USB to UART Bridge Controller in the list you might want to re-do the software. I remember that fixed a similar problem I had when I first started. Do you have a USB port on the board you are using? Or is the processor a 328p?
There is a mini usb on the board i'm using that to connect it to the usb in my laptop. So i re-installed the software, in arduino i can't sellect the port aswell, must be something wrong. If i plug in the usb the board lights up and it seems to be connected.
Found out that it doesn't connect, trying to find a way to fix this
Re: No com port
Fixed was a problem with the USB connection, had to update other software to get it fixed. Ty for your help.