Ublox gps and naze32

[presidenten]

Hey guys!

I have hobbykings ublox lea6h gps. I have configured it in ucentral and now its reacting really good. As soon as I plug it into a usb-port, it aquires a lock and flashes blue within a few seconds.

But ... when I try to connect it to the naze the led do not flash blue. Baseflight says that the gps is active, but checking the gps tab shows no activity what so ever.

Any idea on what might be wrong?

I have run these cli commands:
feature gps
set gps_type = 1
set gps_baudrate = 2
save

....but still nothing.

[Hoppsan_84]

Have you tried to swap rx - tx?
Do you have the gps set to 38400 baud?

I have the same setup but whit nmea.

[presidenten]

Seems like the cables and settings and everything were set up properly. Not sure why it didnt work yesterday. When I when out and flew during lunch today, suddenly the gps coordinates and everything just appeared on my osd.

Flew 2 batteries worth of 20 mins and no problems. Now I just have to take my gear outside of town to try position hold and stuff like that

Sooo.... Case closed I guess

Thanks anyways though