Multiwii no response
Multiwii no response
I have connected and started the Multiwii using Windows 10. I am using an Arduino Nano. The interface screen sees the com port but does not do anything! I hit the start button and the program closes. I am new to this and can not get any further. Any suggestions would be appreciated.
Re: Multiwii no response
Hello, i have same problem, i thik that is something with java. When i hit start button my app close too and in the file with application will create some .txt file. There are some error, and i enter this error to google and i fount this https://stackoverflow.com/questions/347 ... ent-versio
Tomorrow i try solve this problem and i write some feedback.
Tomorrow i try solve this problem and i write some feedback.
Re: Multiwii no response
I think you need to select the com port first, then press start
-
- Posts: 7
- Joined: Tue Jun 26, 2012 8:57 am
Re: Multiwii no response
Had the same problem after connecting my old MultiWii Kopters over Windows 10 or Windows 11.
The problem is: the Java installed is to new.
You need to install an older Java (had success with Java 8.202)
Then open the GUI, choose Comport, hit start, and it's working like old times
The problem is: the Java installed is to new.
You need to install an older Java (had success with Java 8.202)
Then open the GUI, choose Comport, hit start, and it's working like old times
- synersignart
- Posts: 71
- Joined: Wed Mar 22, 2017 3:57 am
Re: Multiwii no response
just to share
for GUI the FlywiiGUI said to still works on windows 10
http://synerflight.com/flywiigui20/
also
the Synerduino fork of the multiwii
http://synerflight.com/wp-content/uploa ... 1-GY91.zip
for GUI the FlywiiGUI said to still works on windows 10
http://synerflight.com/flywiigui20/
also
the Synerduino fork of the multiwii
http://synerflight.com/wp-content/uploa ... 1-GY91.zip