HK 328p GPS and OSD

[Mayday~Mayday]

Can I splice the connection so I can have my single GPS module hooked to both my Remzibi OSD board and FC board? If I just have it connected to the FC I lose the GPS on the OSD, correct? So if I want to keep the GPS on the OSD plus use the features on the FC board I need it hooked to both? Or am I completely going about this all wrong? Thanks in advance.

[scrat]

I think you can't have gps and osd on one serial port.

[Mayday~Mayday]

How can you go about having your GPS unit sending info to the OSD and FC board at the same time? Right now I only have my GPS hooked to the OSD, so when I am flying I have the home arrow and GPS coordinates etc. I want to explore my options with the GPS hooked to the FC as well, so I can use GPS hold etc. Can I do both at the same time? I don't want to lose the GPS info on my OSD. Thanks

[scrat]

If you have just one serial port on FC, then no. GPS or OSD.

[Nickman1200]

Connect the GPS to the i2c bus with a I2Cnav board. And the OSD to the serial port.