ESC Calibration issue on 30A UBEC hobbyking ESC

Post Reply
fauslyfox110
Posts: 11
Joined: Tue Jan 05, 2016 7:26 am

ESC Calibration issue on 30A UBEC hobbyking ESC

Post by fauslyfox110 »

Setup a Multiwii 2.6 quadcopter system and I want to now calibrate the range of throttle on the 30A UBEC hobbyking escs.

Following the instructions in this video: https://www.youtube.com/watch?v=OOplk52R4no

I attempted to change the throttle range but it doesn't seem to be working. I'm wondering if perhaps I am not doing something incorrectly.

According to the hobbyking manual : https://hobbyking.com/media/file/1006513628X70599X0.pdf

throttle range has to be done within 4 beeps (page 5). However when I try this it doesn't work for me.

Below is a video showing my procedure:

https://youtu.be/pJV45yxuxj0

Any ideas what might be going on, or am I overthinking this?

fauslyfox110
Posts: 11
Joined: Tue Jan 05, 2016 7:26 am

Re: ESC Calibration issue on 30A UBEC hobbyking ESC

Post by fauslyfox110 »

I was able to partially solve this issue in that I restored the ESCs to factory settings using the following manual:

https://hobbyking.com/media/file/811103388X7478X20.pdf

However I am still curious about the automatic ESC calibration. If anyone has any ideas do let me know thank you

Post Reply