Setup a Multiwii 2.6 quadcopter system and I want to now calibrate the range of throttle on the 30A UBEC hobbyking escs.
Following the instructions in this video: https://www.youtube.com/watch?v=OOplk52R4no
I attempted to change the throttle range but it doesn't seem to be working. I'm wondering if perhaps I am not doing something incorrectly.
According to the hobbyking manual : https://hobbyking.com/media/file/1006513628X70599X0.pdf
throttle range has to be done within 4 beeps (page 5). However when I try this it doesn't work for me.
Below is a video showing my procedure:
https://youtu.be/pJV45yxuxj0
Any ideas what might be going on, or am I overthinking this?
ESC Calibration issue on 30A UBEC hobbyking ESC
-
- Posts: 11
- Joined: Tue Jan 05, 2016 7:26 am
-
- Posts: 11
- Joined: Tue Jan 05, 2016 7:26 am
Re: ESC Calibration issue on 30A UBEC hobbyking ESC
I was able to partially solve this issue in that I restored the ESCs to factory settings using the following manual:
https://hobbyking.com/media/file/811103388X7478X20.pdf
However I am still curious about the automatic ESC calibration. If anyone has any ideas do let me know thank you
https://hobbyking.com/media/file/811103388X7478X20.pdf
However I am still curious about the automatic ESC calibration. If anyone has any ideas do let me know thank you