Servo Gimbal on pin 9 and pin 10!

Post Reply
multicopter1
Posts: 3
Joined: Thu Mar 10, 2016 8:25 pm

Servo Gimbal on pin 9 and pin 10!

Post by multicopter1 »

Hi there,

my MultiWii Flight-Controller (Drotek Drofly Pro V3) doesn't have the pins 44 and 45 for my servo gimbal. So I decided to put it on pin 9 and pin 10. I tried a lot to change the pins in the code, but it didn't work.

I would be very pleased if anyone could help me and show me what to change in the code (MultiWii 2.4) in order to be able to use the gimbal on pin 9 and pin 10. :D

Thanks in advance! ;)

multicopter1

Post Reply