YAW and PITCH don't work

Post Reply
matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

YAW and PITCH don't work

Post by matrix4life »

Hello everybody,

In advance sorry for my english, I will try to do my best !
I made an hexacopter by myself using a CRIUS Multiwii SE V2.5 (maybe a copy, see de link attached : http://www.ebay.fr/itm/MWC-MultiWii-Sta ... 35eacfde57). For my ESC, I choose this product for each motor (http://www.ebay.fr/itm/20AMP-20A-SimonK ... 1e8e5b9f49).

I have already finished my copter but after setting my flying card, I couldn't unlock it (like in this video : https://www.youtube.com/watch?v=lc4ECi6JYX4). So for the moment, I have disconnected all motors and I try to unlock/lock the card. Because I failled, I noticed using MultiwiiConf that throttle and roll work when I use the remote (Spektrum DX6I) but pitch and yaw don't move ! An other strange thing is that when I connect my multiwii with MultiwiConf throttlr, roll and all auxiliary have the value equal to 1500 but pitch and yaw have 1000 value and don't move.

I check my remote and I sure that the problem don't come from the remote. I think the problem come from the configuration or from my multiwii.


If somebody have a clue for me, this will be awesome :D !

mmmmss1981
Posts: 7
Joined: Sun Jun 21, 2015 12:52 am

Re: YAW and PITCH don't work

Post by mmmmss1981 »

I would think it is your remote. Could you switch the channels and see if you can control pitch/yaw?

matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

Re: YAW and PITCH don't work

Post by matrix4life »

I tried to control the throttle using the pitch and yaw of the remote and it's work. (when I move the pitch command, throttle move and it's the same with yaw)

matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

Re: YAW and PITCH don't work

Post by matrix4life »

When I start my multiwii without the transmitter pitch and yaw have directly 1000 and not 1500. Why ?

matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

Re: YAW and PITCH don't work

Post by matrix4life »

I found my problem ! Because it's an hexacopter, I need to uncomment a setting to use A0 and A1 as output for ESC.

mmmmss1981
Posts: 7
Joined: Sun Jun 21, 2015 12:52 am

Re: YAW and PITCH don't work

Post by mmmmss1981 »

Good man. I am glad you found it. Please sure do share your first flight and let us keep inspired. I been trying to get my Quad X flying for sometime now :) Still cant find luck.

matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

Re: YAW and PITCH don't work

Post by matrix4life »

No problem. When I finish it I will take a short video.

matrix4life
Posts: 12
Joined: Thu Jul 23, 2015 8:00 pm

Re: YAW and PITCH don't work

Post by matrix4life »

http://youtu.be/Lt9_DPO79Hg

Any idea ? My motors are not uniform too but I do not find the solution.

Post Reply