Paris Sirius Air Tricoper Rudder Issue

Post Reply
jdjuggler
Posts: 2
Joined: Tue Sep 16, 2014 12:43 am

Paris Sirius Air Tricoper Rudder Issue

Post by jdjuggler »

New user of the Paris Sirius Air. All controls appear to function normally execpt for the rudder.
Pics attached. In the GUI it shows the "SERVO" values with the rudder stick all the way to the left show a value of 1355, right is 1644. These are quite a bit away from where they should be. And the rudder on the copter does not travel very far as a result.
The stick values (in the upper right) appear to be closer to what these numbers should be.
How would I go about fixing this?
Thank you,
JD
Image 001.png
Image 002.png
Image 003.png

capt
Posts: 54
Joined: Wed Jan 19, 2011 10:54 pm

Re: Paris Sirius Air Tricoper Rudder Issue

Post by capt »

You should not have those I2C errors running in the GUI?

jdjuggler
Posts: 2
Joined: Tue Sep 16, 2014 12:43 am

Re: Paris Sirius Air Tricoper Rudder Issue

Post by jdjuggler »

That has nothing to do with my issue. Tha'ts because the GPS is not attached. Anyone have an idea on this?
Thanks.

Post Reply