Hi all,
i run multiwii on an Arduino Yun. My problem is that my RC does not seem to work, e.g. i cannot arm and in the config app i see no changes when i change the stick positions etc.
I checked (with a different test-sketch) whether the rc signals are reaching the board which seems to be the case.
What else can be wrong?
I am using a Spektrum DX7 with the AR8000 Receiver connected to PINs 2,4,5,6,7 on the Board. I am a little bit puzzled by the tons of extra Spektrum settings in config.h but it seems that they have no effect on the problem whatsoever...
Any idea or suggestion?
Thanks,
Stephan