Motor/Rotor Adapter

Post Reply
awoods177
Posts: 14
Joined: Mon Apr 30, 2012 10:08 pm

Motor/Rotor Adapter

Post by awoods177 »

Hi all, the little metal bit that attaches the rotor to the motor broke and I have had a hard time finding a replacement part. I was wondering if these have a name I might be unaware of and if anyone has a recommendation on where to get them.

The original quad is here:

http://www.goodluckbuy.com/butterfly-x2 ... mbled.html

It was actually bought on eBay, but it's the same exact product.

Thanks,
Alex

refractions
Posts: 92
Joined: Thu Dec 01, 2011 8:55 pm
Location: Scotter, Lincolnshire, UK

Re: Motor/Rotor Adapter

Post by refractions »

Depending on what your shaft diameter is you need the following:

http://www.goodluckbuy.com/4-mm-plane-fixed-pitch-propeller-adapter-shaft-bullet-typey-4-pack.html

You can get these on ebay and from most model shops.

Either measure the diameter of the motor shaft, or has your motors got a model number listed on them?


Iain

awoods177
Posts: 14
Joined: Mon Apr 30, 2012 10:08 pm

Re: Motor/Rotor Adapter

Post by awoods177 »

yeeees thank you!

awoods177
Posts: 14
Joined: Mon Apr 30, 2012 10:08 pm

Re: Motor/Rotor Adapter

Post by awoods177 »

refractions wrote:Depending on what your shaft diameter is you need the following:

http://www.goodluckbuy.com/4-mm-plane-fixed-pitch-propeller-adapter-shaft-bullet-typey-4-pack.html

You can get these on ebay and from most model shops.

Either measure the diameter of the motor shaft, or has your motors got a model number listed on them?


Iain


Now, is the 4 mm the diameter of the motor shaft, or the diameter of the propeller shaft?

My motors are these: XXD 2200KV 1510 brushless motor

Just measuring inaccurately with a ruler I'd say they are approx 1.5 mm diameter.

My propellers are these: http://www.goodluckbuy.com/gws-5030-503 ... -pack.html

They are approx 3 mm diameter.

Thanks,
Alex

refractions
Posts: 92
Joined: Thu Dec 01, 2011 8:55 pm
Location: Scotter, Lincolnshire, UK

Re: Motor/Rotor Adapter

Post by refractions »


refractions
Posts: 92
Joined: Thu Dec 01, 2011 8:55 pm
Location: Scotter, Lincolnshire, UK

Re: Motor/Rotor Adapter

Post by refractions »


Post Reply