IO FPV: 3D printed hexa racer open project

Post Reply
abormor
Posts: 25
Joined: Thu Oct 25, 2012 12:16 pm

IO FPV: 3D printed hexa racer open project

Post by abormor »

Hello,

This is a printable hexacopter project, free to download from thingiverse or youmagine, for fast forward flight and acro on FPV.

It has motors tilted forward 10º, a very rigid frame with good air flow.

We design it to keep the battery inside the frame so it can be flown with the cover to be more aerodynamic

Information about set up is at the end of the video.

Hope you like it and give it a try, ENJOY!!

You can grab it at thingiverse and Youmagine here:

https://www.youmagine.com/designs/io-fpv
http://www.thingiverse.com/thing:607681

Video with better quality at vimeo.




Post Reply