Hi!
I already posted my MWC/KK/MK version of the frame on rcgroups and in the MK forums so i thought it would be nice to post it here as well.
I've been flying this frame for 5 months now and am very happy with the design and mechanical stability of it.
the frame is for 1mm gf/cf and 7.5mm aluminum struts. 1mm gf version like in the picture on a 345mm propbase comes in at 118grams
AUW on takeoff is about 550g.
the whole thread and a 1.5/10mm version (for the ng mini pcb) can be found here:
http://ng.uavp.ch/forum/viewtopic.php?f=29&t=601
other CAD files can be downloaded in the ng CAD section:
http://ng.uavp.ch/moin/Documentation/Construction/CAD
a movie of the build can be seen here:
http://vimeo.com/45270370
Files can be downloaded here:
http://mikrokopter.de/ucwiki/Rober-t?ac ... EMKDXF.zip
(unfortunately i can't upload it here, as the max file size is limited to 256KB (dafuq))
The package includes plans for the struts and a 3d model that can be opened with meshlab or similar 3d viewers.
All files are for non-commercial private use only.
Happy milling and Happy Amps!
Rob