Heavy Lift Hexacopter

[realpastaman]

Quadcopter uk Motors 3536PRO - Torxpower 3536 Pro (Short Shaft)
Engine to engine - 720mm
Esc 40A Pentium (mounted between glass fibre centre plates)
frame aluminium 1 x 1cm 1mm wall / carbon fibre engine support
Props APC 12 x 3.8 slow flyer
Battery 2 x parallel Turnigy nano-tech 4000mah 4S 25~50C Lipo Pack
Control Multiwii wii nuchuck + wii motion plus mounted on paris v4 board
Multi Wii V.19 (pull up on paris board
Weight 2.3Kg ex battery

[televisuals]

Hi There,

I have a question about the paralel lipo solution, is it just 2 extra wires to your distrubution boar + and - for rthe second Lipo?
And why doe you have a second lipo on the hexa, so you have more lifting power or longer flighttimes?
And how does your flight controller/esc/wires act to the double lipo is it capeble of dealing with that amount of power?

Lots of questions, because it's hard to find some real usable information on the web,

Regards Dennis

[televisuals]

Oh yeah, your hexa looks very nice by the way!!

[realpastaman]

Hi There,

I have a question about the paralel lipo solution, is it just 2 extra wires to your distrubution boar + and - for rthe second Lipo?
And why doe you have a second lipo on the hexa, so you have more lifting power or longer flighttimes?
And how does your flight controller/esc/wires act to the double lipo is it capeble of dealing with that amount of power?

Lots of questions, because it's hard to find some real usable information on the web,

Regards Dennis

Hi Dennis, I just wanted some extra capacity should i need it. Ive done some test flights and have posted some details here

http://www.multiwii.com/forum/viewtopic.php?f=9&t=1489

At the moment I'm quite pleased with the flight time and so will probable just go for one battery