Search found 258 matches

by treym
Tue Oct 07, 2014 11:37 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

jihlein wrote:Guess I'm confused (it's been that kind of a day...). Code shows PA9/PA10:


iirc the issue is to be fixed somewhere in :

https://bitbucket.org/treymarc/baseflig ... ?at=master


edit : too much failwork atm ,cant help much more , no time :(
by treym
Tue Oct 07, 2014 10:39 pm
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74502

Re: Why development has stopped?

there is1000 people discusing the comment of 100 peoples about the push request of 10 peoples to project mainly owned by a few.

praise the code that those people forgive that foolish thread ...


so .


Ezio , please send me a pm , i dont have your private email/phone.
by treym
Tue Oct 07, 2014 10:27 pm
Forum: Software
Topic: MultiWii Port to STM32F4 (UAVXArm32F4)
Replies: 23
Views: 9365

Re: MultiWii Port to STM32F4 (UAVXArm32F4)

i am not owning nor related to this project in anyway , ask the repo owner ;)
by treym
Tue Oct 07, 2014 10:09 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

Has anyone successfully gotten I2C working over the STM32F3 PB6/PB7 pins on the Naze32Pro? I'm trying to talk to an external HMC5883 with no success. Yes , work for me [1], I decided to use PB8/9 [2] to keep it aligned within the greater scheme of dog [3] cause i am just a lolcat .. I did look at y...
by treym
Wed Sep 10, 2014 1:07 am
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74502

Re: Why development has stopped?

one does not just say that development has stopped : development take place in a great scheme, user dont understand the arcan and mystery of this process and they see the development as stopped. But as the books of mwi8bit says , one day a new release will come and a great number of flight controlle...
by treym
Tue Sep 09, 2014 11:55 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

hum..

thanks to an accurate reader, it has been pointed out that there is a typo in the code ...

https://bitbucket.org/treymarc/baseflig ... ter#cl-134

my bad, this inadvertly deactivate the onboard mag :)
by treym
Wed Aug 27, 2014 6:59 am
Forum: Frames
Topic: A Foldable medium sized quad that anyone can build
Replies: 5
Views: 6107

Re: A Foldable medium sized quad that anyone can build

Hi, This would be perfect to take on trips as would fit into a large camera case. You nailed it, i needed something well packaged, here are the build constraints - Must fit within a hand luggage with all acessory ( tx included) - Could carry a 3axis guimbal (bottom) - Fly time must be well over 10mi...
by treym
Fri Aug 22, 2014 9:56 pm
Forum: Software development
Topic: Cannot arm via MSP
Replies: 5
Views: 1891

Re: Cannot arm via MSP

by treym
Thu Aug 21, 2014 11:29 pm
Forum: Software development
Topic: Cannot arm via MSP
Replies: 5
Views: 1891

Re: Cannot arm via MSP

it work the same as with a regular tx , you must maintain the stick combo until the required delay is meet (-> start here https://code.google.com/p/multiwii/sour ... ii.cpp#844)
by treym
Thu Aug 21, 2014 10:13 am
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12873

Re: Quanton STM32F4 baseflight

Yes , all serial shall/will be supported ..
by treym
Thu Aug 21, 2014 6:07 am
Forum: Software
Topic: MultiWii Port to STM32F4 (UAVXArm32F4)
Replies: 23
Views: 9365

Re: MultiWii Port to STM32F4 (UAVXArm32F4)

another design with a f4 STM32F407VGT6 - Baseflight (naze32) port to own STM32F4 board

https://github.com/SergDoc/Nev_MultirotorControl

https://github.com/SergDoc/Nev_Multirot ... f?raw=true
by treym
Wed Aug 20, 2014 10:09 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

The aspects I'm really interested in are the SPI access of the MPU as I know from the datasheets this enables me a theoretical 8000hz read rate Hello, Short answer , you would need something faster than a stm32f3@72mhz , code can be made faster but i dont think it can be made as fast as : 1/8000 - ...
by treym
Mon Aug 18, 2014 1:31 am
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12873

Re: Quanton STM32F4 baseflight

timecop wrote:There's probbly a boot button/switch/jumper somewehre


they did not put a button/switch/jumper for forcing the dfu mode

the provided hex wil set the device into dfu , same a the NazePro for uploading the firmware with usb.
by treym
Fri Aug 15, 2014 8:23 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12873

Re: Quanton STM32F4 baseflight

Hi Dominic,

pinout/wiring/af : https://docs.google.com/spreadsheets/d/ ... G-DWvZ9cbU

main change is for timers being on different clock
by treym
Thu Aug 14, 2014 1:10 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

bicycle wrote:
AvengerIl wrote:its incredible, a civilized technical forum, a true or false question get 3 responses and none of them feature tue or false in the anwser...


false

true :)
by treym
Wed Aug 13, 2014 6:11 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

Tritium wrote:HK Naze32? "The HobbyKing version is fully authorized and royalties are paid to the developer on each Naze32 sold."

True or False?

Thurmond


developer as in hardware designer .. not as in software

http://www.hobbyking.com/hobbyking/stor ... oller.html

this is to be opposed with cloners as they are acquainted with theft.
by treym
Tue Aug 12, 2014 5:24 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1571753

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

nebbian wrote: I'm stoked that I can have altitude hold without a baro 8-)


relative distance is not altitude, cmon btch' s..
by treym
Fri Aug 08, 2014 6:29 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1571753

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

after updating cleanfligth i did run into linking issues: make .isr_vector defined in discarded section `.text' the older version did compile without issues. i am using gcc from launchpad and the version is: 4.7.4 Use a more recent version of the compiler like GNU Tools ARM Embedded\4.8 2014q2 to a...
by treym
Fri Aug 08, 2014 9:48 am
Forum: Boards
Topic: Naze32 with Spektrum radio question...
Replies: 14
Views: 6608

Re: Naze32 with Spektrum radio question...

Even though I am new and don't know if my receiver (AR6200) is 10 or 11 bit, for the sake of learning, I found out how to enable serialrx, and set the rx type to 10 as well as 11, and the fc would not even arm. So I disabled serialrx and it's back to where it was. how did you manage to have so much...
by treym
Sun Aug 03, 2014 11:00 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12873

Re: Quanton STM32F4 baseflight

quanton is now flyable with baseflight , ...
by treym
Sat Aug 02, 2014 11:29 am
Forum: Software
Topic: MultiWii Port to STM32F4 (UAVXArm32F4)
Replies: 23
Views: 9365

Re: MultiWii Port to STM32F4 (UAVXArm32F4)

tovrin wrote:Thanks Greg, I dont have a F4 board yet, but i am constantly watching the 32 bit side of things knowing this is the eventual future!


there is eventually the quantom , same mcu stm32f405rgt6


link -> viewtopic.php?f=22&t=5416
by treym
Sat Aug 02, 2014 11:28 am
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12873

Quanton STM32F4 baseflight

Hello,

i have just added some support for the Quanton

board desc : http://www.quantec-networks.de/shop/en/ ... rol-rev.-1

source/hex/dfu : https://github.com/treymarc/baseflight/ ... f4/release

by treym
Sat Aug 02, 2014 9:42 am
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

maybe ? i dont know are you sure you sonar is wworking (without sone simple arduino code ?) i have tested only with the sonar on motor pin 5&6 , ... code is supposed to work on rc pin the configuration code for the sonar is currenlty a pending task , it was not merged so it need some update ..
by treym
Mon Jul 28, 2014 12:00 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

Gaijin wrote: but don't have a dfu (or Hex) image, any of the devs with a free moment feel like compiling the latest version?


done, you can find them in the second post



i did not test the baseflight configurator but you may want to try -> 'load the dev version and uncomment"
https://github.com/multiwii/baseflight- ... ault.js#L7
by treym
Mon Jul 28, 2014 4:52 am
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

entering the bootloader with 'R' doesn't do anything good (using baseflight from marc). true , this is an known issue, please refere to the fixme/testme list startup.s will reboot to dfu with gcc , keil startup.s will reset/reboot With keil compiled firmware , just short the boot pin , so your are ...
by treym
Fri Jul 25, 2014 3:27 am
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

3m is the max range of the hc-sr04 sonar , nothing magic :)

this has to autodetected to accommodate other sensors , further improvement ....



as for roof inspection , thats might be a nice feat .. but would require a max alt limitation , just in case there is a opening in the roof :D
by treym
Thu Jul 24, 2014 9:03 am
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

this is what is used in the baseflight port m ENABLE_MPU6000; spiTransferByte(MPU6000_PWR_MGMT_1); // Device Reset spiTransferByte(BIT_H_RESET); DISABLE_MPU6000; delay(150); ENABLE_MPU6000; spiTransferByte(MPU6000_SIGNAL_PATH_RESET); // Device Reset spiTransferByte(BIT_GYRO | BIT_ACC | BIT_TEMP); DI...
by treym
Fri Jul 18, 2014 2:43 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

that was for the nazePro ..

If you want serialrx and GPS on the naze , you can use softserial , see https://github.com/multiwii/baseflight/pull/108
by treym
Fri Jul 18, 2014 12:37 am
Forum: Frames
Topic: A Foldable medium sized quad that anyone can build
Replies: 5
Views: 6107

Re: A Foldable medium sized quad that anyone can build

thanks for passing by :)


one can also add reinforcement :

Image
by treym
Thu Jul 17, 2014 6:14 pm
Forum: Boards
Topic: Naze32 Altitude Hold Problem - Any Ideas?
Replies: 32
Views: 16509

Re: Naze32 Altitude Hold Problem - Any Ideas?

I do hexa , i can say that this is not the cause .. could you add some information like : baseflight version, hardware revision and configuration dump ? I knaw that uncalibrated acc or bad range/lpf calibration will mess with accZ altitude hold .. but the scnerio that you are describing is none of t...
by treym
Wed Jul 16, 2014 7:36 pm
Forum: Boards
Topic: Naze32 Altitude Hold Problem - Any Ideas?
Replies: 32
Views: 16509

Re: Naze32 Altitude Hold Problem - Any Ideas?

xeo-star wrote: these graphs are raw sensor data.

if this baro as reported as msp , actually it is not raw baro .. unless you changed the code .


so , it might just a major battery failure :p
by treym
Wed Jul 16, 2014 3:48 pm
Forum: Boards
Topic: Naze32 Altitude Hold Problem - Any Ideas?
Replies: 32
Views: 16509

Re: Naze32 Altitude Hold Problem - Any Ideas?

baro is not really baro ..baro is altitude fusion from accZ and baro ..

to me it looks like accZ is indeed telling model is violently going down
by treym
Wed Jul 16, 2014 12:41 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

ArrogantDuck wrote:Yes, where would one get one of these to test?



the nazePro is not listed you must explicitly ask for one by using the contact form on http://abusemark.com/store/ or join #multiwii

as far as i know : board is provide without support, your are on your own , "hell no support".. etc .. for early adopters or dev
by treym
Tue Jul 15, 2014 7:55 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

What is the difference between AfroFlight32 rev5 and Pro version? Thx! Real FPU and code change for a better attitude estimation. No need for soft serial More output .. if you need them .. want to build a 14 motors model ? treym even changed the default settings to go with his Spektrum gear (imagin...
by treym
Tue Jul 15, 2014 12:19 am
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31659

Re: Naze32Pro STMF3 help thread

source : https://bitbucket.org/treymarc/baseflight doc : NazePro Pinout/Wiring firmware : hex/dfu Other source that you may want to look at : m m m to backup the firmware : short answer - linux/mac will use dfu-util - windows will use dfu tools from st electronic - enter bootloader mode by typing &...
by treym
Sun Jul 13, 2014 6:16 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

Maybe we should start a NazePro thread is there a regularly released F3 port of baseflight yet or should I stick to what's pre-flashed for now, don't wanna brick it fresh from the packet As far as i know , there is no regularly released F3 port of baseflight yet , it is to be build from Source to fl...
by treym
Sun Jul 13, 2014 6:17 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

ppm signal will be the usual rc pin 1

flex port is actually only use for spektrum sat rx ie USART3_RX , it can also be a capture/output timer TIM2_CH4

i will test that once i get a ppm rx
by treym
Sat Jul 12, 2014 9:04 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

to hook up ublox GPS should I use the usual_Pins 3 & 4 by default the gps is on the rx/tx pin if you have FEATURE telemetry in use the gps will use the flex port if you have the flex port in use ( with some FEATURE spektrum sat or serial rx ) gps will use the rc pin 2 &3 If you configure th...
by treym
Sat Jul 12, 2014 8:18 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1381538

Re: Naze32 hardware discussion thread

Gaijin wrote:Naze32Pro [..] hook up ublox GPS which also has a dfu or should I use the usual_Pins 3 & 4


hello :)

naze32Pro as in stm32f303 ? dfu , you mean the jst-zh connector marked as flex port ?
by treym
Thu Jul 03, 2014 1:04 am
Forum: Frames
Topic: A Foldable medium sized quad that anyone can build
Replies: 5
Views: 6107

A Foldable medium sized quad that anyone can build

hello, I wanted something in the A4 format when folded I wanted something big enough to fly with a 3axis guimbal i did not find anything that would fit this category , so I make this little drawing .. dxf file and more information BOM : 1 meter aluminum 10mm, 13mm or 15mm some m3 standoff Carbon fib...
by treym
Wed Jul 02, 2014 6:00 pm
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74502

Re: Why development has stopped?

yes , back to topic

good to see that a version 2.4 will be released, the development is not stop :)
by treym
Wed Jul 02, 2014 4:50 pm
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74502

Re: Why development has stopped?

mpu6050 ... using spi and baseflight i have a quad flying with a 250us cycyletime .. since my transmitter and my biological hands dont allow me to exceed the current capabilities of the sensors i can not see the difference with 3500us cycletime ... nothing to mesure from my perspective. i did not tr...
by treym
Tue Jul 01, 2014 6:31 pm
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74502

Re: Why development has stopped?

autonomous flight do not drive me. [...] The socalled advanced hardware advocates have completely failed to deliver inspiring features. i am too not very driven by full autonomous flight .. but i dont agree one the second statement .. we dont need to recompile everything each time we need to change...
by treym
Fri Jun 27, 2014 7:41 pm
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

rc pin 7 and 8

or

motor pin 5 and 6


I have added some information in the first post
by treym
Wed Jun 25, 2014 8:17 pm
Forum: Ideas
Topic: Auto-Follow mode for multiwii
Replies: 6
Views: 3235

Re: Auto-Follow mode for multiwii

i dont think that you are using multiwii , one using multiwii and interested in follow me should be aware of the status of the project regarding this feature : hPj6WZex8j0 UaXkwqQNPNU you did just register to post about that kickstarter, sorry, but you are advertising .. no offense . edit : just in ...
by treym
Wed Jun 25, 2014 7:36 pm
Forum: Ideas
Topic: Auto-Follow mode for multiwii
Replies: 6
Views: 3235

Re: Auto-Follow for Sports and Activities | AirDog

spam , should be reported
by treym
Mon Jun 23, 2014 5:48 pm
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

yes, there is no obvious reason that could prevent using different pins for connecting this sonar
by treym
Mon Jun 23, 2014 1:43 am
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

hi,

the code is not yet in the main firmware , so you need to build the code by yourself : https://github.com/multiwii/baseflight/pull/128

for connecting an hcsr04 sonar to the naze , please refers to the https://github.com/multiwii/baseflight/ ... sr04.c#L66

you also need to activate the feature sonar in the command line interface .
by treym
Sat Jun 21, 2014 4:43 pm
Forum: Software
Topic: baseflight + SONAR
Replies: 19
Views: 10528

Re: baseflight + SONAR

test were conducted with the hcsr04 .