Search found 348 matches
- Wed May 08, 2013 11:36 am
- Forum: General discussions
- Topic: Forum is way slower than usual; some actions give error page
- Replies: 22
- Views: 4982
- Mon May 06, 2013 9:15 pm
- Forum: Getting Started - MultiWii config and setup
- Topic: Falls out of the air?
- Replies: 3
- Views: 1286
Re: Falls out of the air?
Double and triple check your connections again.
- Mon May 06, 2013 7:08 pm
- Forum: Pictures & Videos
- Topic: Mollie MultiWii Bicopter(s)
- Replies: 92
- Views: 40385
Re: Mollie MultiWii Bicopter(s)
She looks stable
- Tue Apr 23, 2013 12:57 pm
- Forum: General discussions
- Topic: FPV with TWO CAMERAS ?
- Replies: 10
- Views: 3591
Re: FPV with TWO CAMERAS ?
Maybe a lens system with zoom ability would work just as well?
I guess so..
but i have already the extra lens (cheap lens x8 used for mobile phones positioned in front of the cam ) and is not the proper period for more "investments"
- Tue Apr 23, 2013 12:25 pm
- Forum: Buy & Sell
- Topic: Cheapest Simple Amega2560 board ?
- Replies: 8
- Views: 4331
Re: Cheapest Simple Amega2560 board ?
@torvin This one http://witespyquad.gostorego.com/flight-controllers/multiwii-pro-ez3-0-flight-controller-w-gps-option.html looks identical like the one RCtimer sells. But they charge extra money for the pins + 9$ shipment to Greece.. so in total is more expensive Anyway ....thank you for your help.
- Mon Apr 22, 2013 9:54 pm
- Forum: General discussions
- Topic: FPV with TWO CAMERAS ?
- Replies: 10
- Views: 3591
Re: FPV with TWO CAMERAS ?
copterrichie wrote:To produce a 3D effect? .
Nop...i just wanted to use two cameras
One with wide angle lens and the 2nd with a optical zoom ....
- Mon Apr 22, 2013 9:34 pm
- Forum: General discussions
- Topic: FPV with TWO CAMERAS ?
- Replies: 10
- Views: 3591
FPV with TWO CAMERAS ?
There is a way to "mix" two cameras outputs in the same input of a transmitter ?
in order to use the monitor in two parts .... 1st half camera one and 2nd half for camera two ?
in order to use the monitor in two parts .... 1st half camera one and 2nd half for camera two ?
- Mon Apr 22, 2013 9:21 pm
- Forum: Buy & Sell
- Topic: Cheapest Simple Amega2560 board ?
- Replies: 8
- Views: 4331
- Mon Apr 22, 2013 9:17 pm
- Forum: Buy & Sell
- Topic: Cheapest Simple Amega2560 board ?
- Replies: 8
- Views: 4331
- Mon Apr 22, 2013 7:29 am
- Forum: MultiWii tweaking - flying experience
- Topic: Arse! Broke an arm.
- Replies: 2
- Views: 1105
Re: Arse! Broke an arm.
Andy7 wrote:Anyhow... By baby has new shoes now.
Cut some foam discs and placed then into the talons. That ought to soften the landings a little.
Good idea !!!
- Mon Apr 15, 2013 6:49 am
- Forum: Getting Started - MultiWii config and setup
- Topic: Mag calibration/orientation check
- Replies: 2
- Views: 1153
Re: Mag calibration/orientation check
Borrowed from multiwii.com/faq How should be the sensor axis directions TILT the MULTI to the RIGHT (left side up): MAG_ROLL, ACC_ROLL and GYRO_ROLL goes up MAG_Z and ACC_Z goes down TILT the MULTI forward (tail up): MAG_PITCH, ACC_PITCH and GYRO_PITCH goes up MAG_Z and ACC_Z goes down Rotating the ...
- Fri Apr 12, 2013 4:48 pm
- Forum: General discussions
- Topic: Flight data recording
- Replies: 35
- Views: 10124
Re: Flight data recording
Personally, I believe a Class 10 SD card will handle anything we can possibly try to write to it. The problem exist of how to connect it to the flight controller. This SD cards are very cheep m. but must be connected via SPI . Do you think that can be implemented in conjuction with the I2C GPS in t...
- Tue Apr 09, 2013 1:44 pm
- Forum: Pictures & Videos
- Topic: My FIRST Looping with MultiWii 9.0
- Replies: 8
- Views: 3919
Re: My FIRST Looping with MultiWii 9.0
zidlov wrote:You need facebook to watch this. Not everyone's cup of tea....
+1
- Thu Apr 04, 2013 11:39 am
- Forum: Pictures & Videos
- Topic: Kitesurfers
- Replies: 3
- Views: 1969
Re: Kitesurfers
Edit your post and USE ONLY THE ID ------>> i0Hf2s2faWs
- Fri Mar 29, 2013 1:50 pm
- Forum: Shields, boards and sensors
- Topic: 10Hz GPS thread
- Replies: 84
- Views: 122352
Re: 10Hz GPS thread
@skoubri
Did you find solution ?
Did you find solution ?
- Wed Mar 20, 2013 10:07 pm
- Forum: Pictures & Videos
- Topic: Aha, my home-made wireless 5.8G camera
- Replies: 2
- Views: 1966
Re: Aha, my home-made wireless 5.8G camera
Can you please give us more details ?
thank you.
thank you.
- Thu Mar 14, 2013 5:52 pm
- Forum: Pictures & Videos
- Topic: Noccopter on tour :)
- Replies: 16
- Views: 7192
- Sun Mar 10, 2013 9:39 pm
- Forum: Shields, boards and sensors
- Topic: DIY Flight Controller
- Replies: 8
- Views: 5215
- Sun Mar 10, 2013 5:56 pm
- Forum: Software development
- Topic: VTOL Plane like V22 Osprey
- Replies: 21
- Views: 6252
Re: VTOL Plane like V22 Osprey
Have you seen that ?
http://www.wired.com/autopia/2013/03/agustawestland-electric-tilt-rotor/
Interesting NEW Design !
http://www.wired.com/autopia/2013/03/agustawestland-electric-tilt-rotor/
Interesting NEW Design !
- Wed Mar 06, 2013 12:10 am
- Forum: Pictures & Videos
- Topic: king warthox !!
- Replies: 49
- Views: 19529
Re: king warthox !!
Impressive !!!
- Mon Mar 04, 2013 12:41 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 56539
Re: Release 2.2 is coming
I have hacked the cheap Turnigy RF9X-V2 module getting a wire from the led indicator
Could you please give us more details ?
- Sun Mar 03, 2013 5:56 pm
- Forum: General discussions
- Topic: Any Greeks around here ?
- Replies: 11
- Views: 3717
Re: Any Greeks around here ?
Hi George.
- Sun Mar 03, 2013 5:44 pm
- Forum: Pictures & Videos
- Topic: Cinestar8 clone with MultiWii -- killer combo
- Replies: 3
- Views: 2137
Re: Cinestar8 clone with MultiWii -- killer combo
copterrichie wrote:Nicely done.
+1
- Fri Mar 01, 2013 6:41 pm
- Forum: Ideas
- Topic: wishlist for v2.3
- Replies: 104
- Views: 43345
Re: wishlist for v2.3
Probably a medium to read/store data like SD Card Reader should be implemented.
Imagine that ALL PIDs are stored in this medium and through GUI you are able to change and store them.
Also Way Points can be stored this way .
Imagine that ALL PIDs are stored in this medium and through GUI you are able to change and store them.
Also Way Points can be stored this way .
- Thu Feb 28, 2013 11:05 am
- Forum: Software development
- Topic: CODE more readable for Newbies
- Replies: 6
- Views: 1719
Re: CODE more readable for Newbies
@ Alexrod
What i'v done is to "study" OLDER VERSIONS of MW where things are simpliest.
Try this OLD version from here http://www.multiwii.com/forum/viewtopic.php?f=16&t=3154
What i'v done is to "study" OLDER VERSIONS of MW where things are simpliest.
Try this OLD version from here http://www.multiwii.com/forum/viewtopic.php?f=16&t=3154
- Wed Feb 27, 2013 12:10 pm
- Forum: Shields, boards and sensors
- Topic: I2C error Need Help
- Replies: 9
- Views: 3332
- Tue Feb 26, 2013 4:37 pm
- Forum: Connecting elements
- Topic: Air rider rc conversion + arduino uno
- Replies: 7
- Views: 2478
Re: Air rider rc conversion + arduino uno
to connect them in parallel do I need a special cable? No..just solder the cables to the pin I'll be using a 6 channel,whats the ppm sum? Some receivers use ONE PIN to"transmit" the channels to the board In your case..One single cable will carry all six channels to your arduino. That is P...
- Tue Feb 26, 2013 2:21 pm
- Forum: General discussions
- Topic: Old 1.0 MultiWii Version
- Replies: 2
- Views: 1068
Re: Old 1.0 MultiWii Version
Thank you Richie
- Tue Feb 26, 2013 1:54 pm
- Forum: General discussions
- Topic: Old 1.0 MultiWii Version
- Replies: 2
- Views: 1068
Old 1.0 MultiWii Version
Hi. I m trying to read and understand how MWii code flows. In the current versions is too complicated for a newbie like me. So i decided to start my reading from OLDER Versions like this one.. https://code.google.com/p/multiwii/source/browse/tags/MultiWiiV1_0/MultiWiiV1_0.pde?spec=svn18&r=18 My ...
- Mon Feb 25, 2013 5:31 pm
- Forum: Shields, boards and sensors
- Topic: I2C error Need Help
- Replies: 9
- Views: 3332
Re: I2C error Need Help
From Arduino IDE go to
FILE>>EXAMPLES>>EEPROM>>EEPROM CLEAR
FILE>>EXAMPLES>>EEPROM>>EEPROM CLEAR
- Mon Feb 25, 2013 7:24 am
- Forum: Shields, boards and sensors
- Topic: I2C error Need Help
- Replies: 9
- Views: 3332
Re: I2C error Need Help
Try to clear your Eprom first and then upload again the code
- Mon Feb 25, 2013 7:20 am
- Forum: General discussions
- Topic: Basic PID settings
- Replies: 2
- Views: 1117
Re: Basic PID settings
Use Reset button on the GUI
- Sun Feb 24, 2013 8:04 pm
- Forum: Connecting elements
- Topic: Air rider rc conversion + arduino uno
- Replies: 7
- Views: 2478
Re: Air rider rc conversion + arduino uno
Is it possible to use my Wii+ and nuchuck as acc and gyro? (as I was doing in the other thread) Yes.... what about if you have more than one sensors? for example if I have two sensors that need the SCL-SDA how do I connect them?in parallel? and...YES !!! and also how do I connect the receiver to th...
- Sun Feb 24, 2013 2:13 pm
- Forum: Connecting elements
- Topic: Air rider rc conversion + arduino uno
- Replies: 7
- Views: 2478
Re: Air rider rc conversion + arduino uno
The connection diagrams are correct. I'm thinking about using this as barometer: m ... 0891831092 and also where is the data is going to be stored?do I need to use the barometer in the config.h? I dont know what you are using as Gyro - ACC but i think that this Ihttp://www.ebay.com/itm/10DOF-IMU-MWC...
- Sat Feb 23, 2013 9:38 pm
- Forum: Ideas
- Topic: Stepper motor gimbal
- Replies: 2
- Views: 1534
Re: Stepper motor gimbal
I was thinking to use something like this to control the stepper motor.
Tested and working.
Tested and working.
- Sat Feb 23, 2013 7:17 pm
- Forum: Ideas
- Topic: Stepper motor gimbal
- Replies: 2
- Views: 1534
Stepper motor gimbal
Good evening. I have some stepper motors laying around (salvaged from old printers) and a backup WMP+Nunchuck sensors. What i'll try to do is to use the Multiwii Platform as gimbal stabilizer. The problem is that my coding skills are less than limited so i'm asking your help. Is there any one willin...
- Fri Feb 22, 2013 2:21 pm
- Forum: Connecting elements
- Topic: Air rider rc conversion + arduino uno
- Replies: 7
- Views: 2478
Re: Air rider rc conversion + arduino uno
-Can I use the arduino as a trasmitter or receiver?( sorry if its a stupid question) No..you cant use arduino as Transmitter-receiver. You have to buy one -if I have to set everything up I will just have to follow those diagram on the website,right? which one ? -If I want to add a gps or camera,wha...
- Thu Feb 21, 2013 10:02 pm
- Forum: Getting Started - MultiWii config and setup
- Topic: My build
- Replies: 3
- Views: 1419
Re: My build
Sensors?
What kind of sensors you are planning to use ?
What kind of sensors you are planning to use ?
- Wed Feb 20, 2013 9:19 pm
- Forum: Ideas
- Topic: Brushless direct drive GIMBAL - big revolution for a few $
- Replies: 84
- Views: 75763
Re: Brushless direct drive GIMBAL - big revolution for a few
Question...may be foolish.
Why no one does not use stepper motors?
Why no one does not use stepper motors?
- Tue Feb 19, 2013 8:37 pm
- Forum: Buy & Sell
- Topic: Cheapest Simple Amega2560 board ?
- Replies: 8
- Views: 4331
Re: Cheapest Simple Amega2560 board ?
copterrichie wrote:There is no MWC code for the DUO right now .....
Seems that i'm missing something.
What do you mean ?
The above board will not work ?
Why?
- Tue Feb 19, 2013 8:17 pm
- Forum: Buy & Sell
- Topic: Cheapest Simple Amega2560 board ?
- Replies: 8
- Views: 4331
Cheapest Simple Amega2560 board ?
Where can i find cheap Atmega2560 board than this one? http://www.goodluckbuy.com/arduino-mega-2560-atmega2560-16au-compatible-with-mwc-pirate-control-board.html I mostly care about the pin availability of the chip to the board (to be easily accessible for future uses) I dont want sensrors on the bo...
- Tue Feb 19, 2013 10:41 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 389957
Re: SW Development on Minim Osd
I guess that this one will do the job
http://www.hobbyking.com/hobbyking/store/__36844__Minim_OSD_v1_1.html
Right ?
http://www.hobbyking.com/hobbyking/store/__36844__Minim_OSD_v1_1.html
Right ?
- Tue Feb 19, 2013 7:13 am
- Forum: General discussions
- Topic: Help! Need a bit of coding help.
- Replies: 5
- Views: 1412
Re: Help! Need a bit of coding help.
Use Multimeter to verify if that the pin is faulty..
- Sat Feb 16, 2013 6:46 pm
- Forum: Software development
- Topic: CODE more readable for Newbies
- Replies: 6
- Views: 1719
Re: CODE more readable for Newbies
Thank you guys
- Sat Feb 16, 2013 2:51 pm
- Forum: Software development
- Topic: CODE more readable for Newbies
- Replies: 6
- Views: 1719
CODE more readable for Newbies
I'm trying to understand how MultiWii code is running.
And i think that for a newbie like me it would be better to delete some parts of the code that are not used in my "Board type".
Do you think that will create some problems ?
And i think that for a newbie like me it would be better to delete some parts of the code that are not used in my "Board type".
Do you think that will create some problems ?
- Fri Feb 15, 2013 7:19 am
- Forum: Pictures & Videos
- Topic: Mollie MultiWii Bicopter(s)
- Replies: 92
- Views: 40385
Re: Black Mollie MultiWii Bicopter
Better and better every time !!!
- Wed Feb 13, 2013 7:26 am
- Forum: Software development
- Topic: Data extract from GPS
- Replies: 1
- Views: 641
- Sat Feb 09, 2013 6:23 pm
- Forum: General discussions
- Topic: GPS in parallel ?
- Replies: 7
- Views: 1930
Re: GPS in parallel ?
Hijack the serial TX line on the Gps before it enters ihe I2C circits. I2c can only have ONE Master in the system. At least in theory...... Thank you PatrikE. Exactly what i had in my mind. I will test it Post by copterrichie » Sat Feb 09, 2013 4:57 pm Now I understand the reason for the question, ...
- Sat Feb 09, 2013 2:11 pm
- Forum: General discussions
- Topic: GPS in parallel ?
- Replies: 7
- Views: 1930
Re: GPS in parallel ?
I used this devices as example.
I guess that if you use I2C GPS it is possible to share the data through I2C bus... right ?
The question is if it is possible to share GPS data (I2C or serial) from a single device to other (2, 3 or more).
Is it ?
I guess that if you use I2C GPS it is possible to share the data through I2C bus... right ?
The question is if it is possible to share GPS data (I2C or serial) from a single device to other (2, 3 or more).
Is it ?
- Fri Feb 08, 2013 6:12 pm
- Forum: General discussions
- Topic: GPS in parallel ?
- Replies: 7
- Views: 1930
Re: GPS in parallel ?
Thank you for your answer QuadBow
What if you want to connect an OSD and a camera Gimbal at the same time ..additionaly to the data send at your FC ?
I guess that you will have to share the GPS data with those two devices actually three .
QuadBow wrote:But does it make sense for a flying object?
What if you want to connect an OSD and a camera Gimbal at the same time ..additionaly to the data send at your FC ?
I guess that you will have to share the GPS data with those two devices actually three .