MultiWii

kataventos

OK, I just received a new board from readytoflyquads (whitespy)... 1. Do I need to cut the trace as indicated by the wiki page? How do I tell if this is from the first batch? The date on the back says 08/27/2013 m. Hi, you can know by checking it with the multimeter and you can see it on the wiki p...

kataventos

Hey Gimbal,

thanks, what do you mean missing? I do not understand...

kataventos

... I uplaoded the KVteam sketch but when I connect via the GUI I cannot save any data, when I hit read after I pressed write everything resets to default. Nils Hey Nils, to be honest I can´t figure what´s happening no clue sorry... How did that happen? I mean how can that happen by uploading the c...

kataventos

Hi, because I am addicted to MWii only, I put all my stuff here This video have nothing fancy, just to show good range with AV DIY (TX/RX) modules using CL and SPW antennas made with the Jig. Made this video for the JIG topic on RCG´s in August 2013 but somehow forgot to upload it on YouTube... Chee...

kataventos

Hey Tryss,

four things:

- Coooool sound;
- you are crazy flying in the rain

;
- why did you zoomed the image?
- have fun

-KV

kataventos

yeaahh... let´s just register on development forums and start posting... I am also developing this... very smooth, take a good look at the rubber! I think I am going to call it TIRE: https://lh6.googleusercontent.com/-1YxkNImG294/Ustt3r-wXPI/AAAAAAAABZ4/mzoh8ImKz2M/s720/wagonwheel.png

kataventos

Hi T-Bob, welcome and forgive me for late reply, I have been away from home. I can help you but the best is for you to check this topic here, this is the last page but you can find all info if you have the patience to read about it: http://www.multiwii.com/forum/viewtopic.php?f=7&t=1929&star...

kataventos

Crashpilot1000 wrote:...because I didn't flash their killerpoke soft.
...trash it.....
Cheers
Rob

funny, yesterday I saw your post on DIY_D (December 31 11:42am) ... you´r right, what a joke.
About your board... sell it

Cheers,
-KV

kataventos

it is confusing ! ive been talking about rssi AND amperage, rssi most recently, since post #44899 when you say test rssi on analog, do you mean normal pin or miso pin ? i tried miso (12) as it is coded that way. can you read pulsein on a analog pin ? PWM RSSI question.... ...I worked at this creati...

kataventos

OK, it is the same as the reported issue on the repo using D8R-II (I think) Are you talking about the current sensor formula? if yes he did posted it already some posts back. If not and you meant RSSI, the test was performed using the analogue input. Can you try that also? To simulate with the GUI s...

kataventos

if you notice i did comment on that issue. i suspect it should work it theory your code. i will test it now for you as i have everything to do that here. though i think you should still go with carl's approch. Of course, nothing more to do with it! Carlo´s thoughts and research are 100% correct he ...

kataventos

... So to convert the steps to Amp we need to calculate the voltage and then, with the sensor "sensitivity" in mV/A (for example 40mV/A) , calculate the real Amperes. Formula for unidir sensor with 0.040V/A sensitivity and max 100A: Current [A*10]= (analogRead(pin1)*(5.00/1024))/0.040*10;...

kataventos

I didn't think mw could take ppm rssi as input Hey Marc, yep, Hayden is right you can´t. You probably wanted to say PWM and not PPM, am I right?. you have two options: 1- Using a small filter as follows (both MWii or OSD ADC): https://lh5.googleusercontent.com/hVDAdxHBrbBI7P3eTilgHhVJBeq_dlBFnGRJ2P...

kataventos

Haydent, we are limiting to 999=(99.9A) the print screen, that´s why I told you "you´r on screen" on my last post about it. This does not influence the real values or taken into account for previous calculations. About your answer: no, what I meant was that I thought you were going to chec...

kataventos

Hi, I found today a Little Bug in the GUi. After Setting up 4S Battery i can't Set the Alarm to 13,2V. Only 10,5v is possible. On Tv, whith stick setup it is possible to Set the Alarm to 13,2. Probertly we can Set a cell Voltage like 3,3v to configure the Alarm? is it right that the rssi in the ppm...

kataventos

... there is a zip file with the code on this page - m post #221 by okan_vitaliy ... ...I'm using a slightly modified version of okan_vitaliy's code, here's the patch with the changes - m Hi vvk, also welcome and thanks for the performed tests. Effectively 1.44ms is some huge difference, we will al...

kataventos

Hi, First of all, thanks for all the work done with minimOSD code. I’m flying with KV_Team_OSD starting from r345, and now decided to register on this forum and provide some feedback about new version. Hereafter are some comments about r2.2: 1. I’m using MWii data for RSSI / amperage / pMeterSum / ...

kataventos

weren't you going to check and report if your MWii implemented "patch" is OK with latest dev?? I was waiting for that since you offered... As for the other questions, please look carefully at the entire code regarding that particular case, I´m sure you will find answers. Besides it is goo...

kataventos

confusing? no... look more thru the code and you will find out. Also you´r on screen.
Anyway, just test it and report it back if you please. Also this was tested with Witespy´s for the record...

About news with your stuff thru MWii??? any??

kataventos

Hey Hayden, /2 is the same as subtract 512. Because the sensors have their own sensitivity if you have a sensor with at zero 1v or 2v or even 2.5v you can just adjust the offset which is working just fine here. NOTE that I am reduced to the hardware I have so, it would be nice to have some more feed...

kataventos

repair or reorder? I ordered 2 new from Whitespy instead. I'll try to find a cap and solder in. Maybe i could just bridge the gap? Not sure what function the cap have. Probably some filtering? Hey, WiteSpy is the best choice at this time, latest developments were made with it and I am very happy. A...

kataventos

OK those are awesome news!

thanks anyway for passing by, your contribute was very important for the developments.

Bye Bye

kataventos

thanks for this great time, software bugs are almost gone now thanks to you. any other bug to declare let´s say... hmmm... in development version 2.0? Of course that everyone here would like to know about 2.0, .1, r340 and r370 when we are on 2.2... Now serious... come back every time you need to t...

kataventos

@Carlo completely ignore everything I have said about the ARMED/DISARMED position on screen when heading graphic is Off (you know what I was thinking when I said that)... I downloaded the code (I´m far from home at this time) and took a look to it, everything should work fine man, then I returned he...

kataventos

kataventos

@ all other users, if you think that the CharMap is to small on your screen I can rapidly edit a new and alternative one with symbols for screens with less resolution, no problem with that. You can even give examples of 3 letters or icons for all of them... As I am going to be out until January 3 pl...

kataventos

I am in right-top corner. Aka "home position". Aka "Launch point". Aka "RTH location". Aka "arming place". Arrow points to different location, not sure if it's OK. Probably... Serious, are you 15 years old? If yes I think this statement should be OK, but not ...

kataventos

... suggestion how to make it better, opinions ... ?? Sorry but you got me wrong my friend , I am just saying that you have other OSD´s and topics. Just that... Why concern about this firmware if you have options that fulfill your needs better right? I think it is legit to say this... Also, rev. 37...

kataventos

Great if you have had an awesome experience... would you be so fast posting? CURRENT SENSING works amazingly, I PERSONALY CHANGED ALL FORMULAS and tested WITH TWO DIFFERENT SENSORS (Allegro and RCTimer) so, I am damn sure. If it does not work for you try some reading about it. SMALL FONTS are editab...

kataventos

Thank you Haydent, 2.2 have also lot´s of work from Carlonb regarding the moveable items, it does not seem like because I pushed he´s work. We also have new developments and ideas going (not on the repo yet) for the next release... Have fun flying it, -KV PS@all: As you can see, the wiki is complete...

kataventos

Ho! Ho! Ho! Santa is on the go.
2.2 is already under the Christmas tree

...

kataventos

OK,

a friend of mine found it under some papers and stuff

Yes, it is a resistor and the value is 1k... hope you get it up in the air soon.

Cheers,
-KV

kataventos

Hi Noc, the only thing that crosses my mind is to flash the boot loader but this you know already... Because you don´t have a USB ASP maybe you are stuck with it, my advice is for you to order one, they´r cheap. As for the "resistor" I will look carefully to one I have just like yours and ...

kataventos

Hello friends, as promised the KVTeam development version 2.2 is almost out little Christmas present from us Please check www.kvteamosd.com Also check the updated wiki for the new version prior installation. Have fun and fly hard but safe during this Holidays This team wish you a merry Christmas and...

kataventos

Just a Teaser...

Squid is still in progress for production!

Cheers,
-KV

kataventos

... i will look into your formula changes thanks again To be honest I never gave much importance to the OSD ADC for AMPERAGE meter because I never used the OSD for that... but now that I tested all pins on the WiteSpy model and went thru the code looking for wrong calculations I found that this nev...

kataventos

Hi Deet,

OK right, it will display now since you asked

Thanks

kataventos

Hey thanks, Yesterday I was experimenting with that and already changed all calculations (included that one), also changed from INTERNAL to DEFAULT As for spelling... already done, I´m rebuilding the GUI. -KV PS: Why do you /100 MWii data, where did you based to that? (Regarding amperage) Also, in w...

kataventos

Naze32 rev4 Harakiri SG2.5 with KVTeamOSD R370 flight test : * VBAT * PH * RTH * OSD SW * FAILSAFE ( Transmitter shut down for test, failsafe_justph = 1; // Does just PH&Autoland an not RTL, use this in difficult areas with many obstacles to avoid RTL crash into something ) Hey, it´s flying gre...

kataventos

thanks again for the awesome Firmware. I have fixed the latest batch of hardware. I am also cutting the extra track on the units I am shipping now....Please tell me if there is anything more I can add. after you cut the track you should read 47.0K between GND1&GND2 Hi Paul, thanks, everything w...

kataventos

haydent wrote:whats this for ?

Are you talking about the mod that need to be done on the previous batch? if yes you probably miss this post!
viewtopic.php?f=8&t=2918&start=700#p44034

kataventos

Hi Deet,

Haydent emailed me today about that bug.
Thanks for reporting this, as I said him, will look and fix for next release

-KV

kataventos

Hi Haydent,
this is going to be added to the main code for the next release. Just one point, the calculations can not or should not be in serial scketch.

Cheers,
-KV

kataventos

scrat wrote:I have just oredered minimOSD v1.1 form HK. Will I be able to use it normaly like to date or no?

Yes, you will be OK.

kataventos

from the wiki: Note: In order to have your simulator working correctly with current version you will need to use BOXNAME*S and press save, now, before you connect it again to your flight controller you have to select again BOXID´S and save or you will not have a fully functional OSD. Where to set B...

kataventos

Hi, I updated the revision above with detailed steps. Follow it carefully step by step or you will blame yourself for having problems... Any other modifications to the original hardware or software may induce in a faulty OSD. In this case the Team can not accept any complains neither help you with y...

kataventos

Hi, me and the entire Team already have the OSD samples gently sent from the manufactures. Thanks to Jani from http://www.jdrones.com/ and Paul Baxter from m These are from now on our supported and advised OSD´s. https://lh6.googleusercontent.com/-RZqU9X6ApcU/Up9jLFUiRmI/AAAAAAAABNU/4I1gvngbA90/s450...

kataventos

Minim OSD mit KV-Team R3.70, Crius AIO V2, Multiwii 2.3 after arming still "disarmed" in OSD no change of flightmode icons (Battery, angle, heading are working) "Use Boxnames" is checked in GUI. Any ideas? Problem with MW 2.3 ?? Louis Hi Louis, no, no problem with MW SW compatib...

kataventos

I think its time I look for another OSD to use. ...and I will not post again. ...you truely are a dick. An unbearable dick... Are you "girls" boyfriends or just the mean less poorly designed bratty twins? The good and bad thing about this forum is that it does not have active moderators.....

kataventos

lol. he was banned from #multiwii for bein' a dumbass too. edit: crap, just filled this thread w/ bullshit too. SORRY! ps. Lovin' the new minimalistic layout. Lookin' forward to upgradin' my firmware. Keep up the good work guys! look at the pics carefully: https://lh4.googleusercontent.com/--ZS0-fC...

Search found 702 matches