MultiWii

msev

Do those receivers that do output ppm, output 8 channels?

msev

I'd like to see some video of gy-80 running on 2.1 software? Can someone film their multi?

msev

Is there maybe a function to change the thickness of the osd text?

msev

I haven't got the hardware to test it yet, but I very much like the idea! Nice work!

msev

Here is a shield for a sd card: http://www.ebay.com/itm/SD-Card-Shield- ... 831wt_1344

msev

How does multiwii detect failsafe? Can it detect signal loss on turnigy receivers?

msev

Is logging to SD cards to slow? Could both ways be implemented - the at45 chip + microsd shield ?

msev

Although dongs made an excellent and very affordable Naze32 board (with all the sensors already on it) a lot of guys have seperate IMUs with different sensor combos at home and would probably like to have their stuff in use also in 32-bits. Here's where STM32F4DISCOVERY could come into play. Regardi...

msev

Option for speed in km/h would be cool

msev

Patrik do you have a 9x with its original module + receiver (8ch or 6 ch) at home? If you have maybe you could test some routine to enable failsafe (rth), when rc signal to receiver is lost? Did you manage to get any improvement in altitude using just gps? Do you think it would be ok to use just gps...

msev

Pyrofer show some pics of your diy transmitter...which transmitting module do you use?

msev

Which channel of all the channels do you use for detecting it? So you have it connected to an analog input on the arduino...Can you point me to the relevant parts of code in multiwii?

msev

Richie how is that rssi mod working for you?

Another thing how could we detect failsafe on this receiver so that multiwii could initiate some function like rth, when it detects failsafe.

msev

Would it be sensible to run this linux fork on raspberry pi?

msev

Congratulations!

msev

Thank you for the explanation eosbandi, it was very clear

msev

Does the telemetry function include realtime showing position on the map?
I'd like to see some screenshot of that new map functionality if someone has some time to take them

..Is wingui also reverse compatible with the earlier serial protocols?
Regarding telemetry, is it compatible with openlrs?

msev

I believe there is an arduino bootloader available for atmega324.

..So possibly maybe a port could occur..

msev

So this gui works on Windows too right? I don't see instructions in the read me how to.set it up in Windows.

msev

Tommie are you willing to code the add-on features that i wrote in my above post

msev

So is atmega328 still enough for all the functions..for example lets say: - wmp+adxl345 - autodetect gps or gui -gps rth + pos hold - option to trigger rth when failsafe (measuring voltage of receiver) - flaps -maybe i2c oled lcd for field pid adjustments, no big deal if its not enough room for this...

msev

I can smell it, this could make a great opensource transmitter project ...I'll soon have some 9x tx modules..I'll probably use atmega328 dip to have some more memory to spare for features.. Here are my ideas and wishes, hope Tommie could help me achieve them : - I have a joystick with a gameport con...

msev

I have a few noob questions,..just how many pots/switches/gimbals could be interfaced to these kind of dip atmegas (lets say for example atmega168 dip)? I see it has 5 analog inputs and 13 digital ones...Could I use all? Would it be possible to implement some mixes, expo, dual rates etc.? Looking fo...

msev

It would be especially cool, if we could hack a clone of the ps3 move controller..On DX there is one for 17$(don't know if is the actually the move controller or something else)..If it has a suitable stm32 processor and suitable/hackable pcb layout, this could be golden..Is there some other hackable...

msev

Is that guy using that 6 position switch on 9x on some custom firmware? Does it have to be wired to more pins on the atmega64 than the typical 2 position switch?

msev

Djrm have you test flown it already? A video would be nice

msev

So they are approx 450 size..Thanks for the tips guys!

I can't see very good from the pictures, do you have the skids bolted to the arms of the quad?

msev

How big are these skids? Which heli size? From which material are the skid pipes made?

msev

Awesome man! Which gps do you use Patrik? And at what baud and refresh rate? I'm thinking for Bail out, if plane would be above that altitude it should maintain that higher altitude not go on that set altitude, there should be an exception made. Next stop, waypoints hehe Patrik I have a hipotetical ...

msev

Will you make baudrate and refresh-rate for gps selectable? Which will be the default settings? I ask this because I have an arduino lm1881 based osd and it will share gps with multiwii board...

msev

Great! Hope you have a "hat cam" so yoi can make a video of the testing

msev

So this mod enables telemetry on serial 3 right? Are you going to send that data to yourself with bluetooth or what are you going to use it for?

msev

When talking about the GPS RTH, we have to take into account the accuracy of gps,...so how much meters is the gps inaccuracy concerning altitude? Its within 20m right.. Will the plane fluctuate in altitude or will the altitude somewhat be smoothed out, I don't know how much the gps altitude value fl...

msev

Sorry for the slight off-topic question, but on a MEGA board which has I think 3 serial ports, is it possible for using multiple at once,.. For example one for connecting an osd to the board, another for connecting and using a bluetooth board and the third for connecting the GPS for rth and position...

msev

Thanks!

msev

Please share links to which board that is?

msev

+1 It would be cool if that new eosbandi pid style rth code would be integrated since everyone it seems is having good luck with it.
Although here it would be somewhat different since the plane cant be in one spot but has to circle around.

msev

Will you test it on the plane also?

msev

Great news Patrik

. you use a nunchuck as a acc right? I would like to use adxl345 as acc.

msev

In a rth situation goverend by gps would this leaning interfere? Should the plane be totally levelled? Do other commercial systems have magneto or is in their case acc sufficient and why?
I've seen videos of some multiwii flying wings that flew levelled fine...

msev

Which sensors are on the green board

msev

Is atmega1280 too small?

msev

Thanks! looks nice

msev

Thanks Mbrak

msev

I'd like to see a video of how the newest code works

...its interesting to see it in action

msev

Whats the power equivalent in mW to compare to our usual transmitters?

msev

That idea for using the lcd instead of and osd is great...from some foam one could make a sunshade...but some new things would have to be coded dont know how difficult would be to add a home arrow which is quite essential...and a lot of other info would be useful.

msev

I heard some cases that autolevel was better in 1.7 than in the latest versions...:/

msev

Alexmos which sonar do you use? Is there any good cheap supplier for ADNS-5050?

msev

Loosi where did you buy that gps module?

Search found 186 matches