MultiWii

ezio

One request I would like to make. Is it possible to include GPS HDOP & maybe VDOP (for Patrick_E fixed wing users) Not possible. MultiWii doesn't have this info. It's a pity because HDOP is a much more accurate indicator of GPS accuracy than just number of sats especially when solar activity ba...

ezio

brewski wrote:One request I would like to make. Is it possible to include GPS HDOP & maybe VDOP (for Patrick_E fixed wing users)

Not possible. MultiWii doesn't have this info.

ezio

http://www.multiwii.com/wiki/index.php? ... l_Protocol

ezio

For me, as for now, the best connection method is through 3DR Radio. It is simple to connect as a Bluetooth and it has a lot of rage.

ezio

Hello, I am using/starting to use a Flyduino Mega and a Frsky Taranis with the X8D, which supports Telemetry via SBUS. Now, browsing through EZ-Gui, I noticed the FrSky Telemetry-Option. Searching about what's behind this, I found this thread and read most of it. The general process is understood: ...

ezio

Is setting the PID in flight, without saving them to eeprom, safe during the flight?

Bart

ezio

Or maybe this is better solution
viewtopic.php?p=57855#p57855

ezio

Hi, MSP version can already get from another MSP, no plan to duplicate any info There is currently a field not used in MSP: BOARD_NAME: 16 char long A new MSP with just this would be enough ? I think that this will be perfect. But the msp version has to be change every time the command is change/ad...

ezio

Thanks for help. The problem has been fixed. Beta version will be available in few hours.

ezio

maik wrote:Hi Bart,
I just send some captured FrSky data to your EMail.

Maik

Thanks

ezio

Hello Read the forum translating it with google because they are not English But that have asked me to translate: I started in the drone world with the ArduPilot board connecting to an airplane model, it was very basic and waypoints were introduced by text in the program itself, so when a change th...

ezio

Hi I know that this is in MSP protocol for a while now, but I think that storing the NAV version in capability flag is not a good idea especialy when baseflight and cleanflight use the same bits for other staff. It starts to irritates me because there is no way to write universal GUI if there is no ...

ezio

Maybe someone can record with realterm ( m) or similar software couple minutes of FrSky telemetry traffic with working GPS? There is a bug in EZ-GUI in position reporting and I want to fix it. Unfortunately I don't have required receiver to test with. Bart so you want someone to connect eg a serial...

ezio

Maybe someone can record with realterm ( http://realterm.sourceforge.net) or similar software couple minutes of FrSky telemetry traffic with working GPS?
There is a bug in EZ-GUI in position reporting and I want to fix it. Unfortunately I don't have required receiver to test with.
Bart

ezio

Could you add new MSP command which returns ie a string with name of the firmware ("cleanflight") and the integer with the version? It will help me and others to adjust features set in the gui. The same should be done in BaseFlight, MultiWii etc The problem: Right now the AUX settings are ...

ezio

Thanks. I didn't think of GPS altitude Next time I'll pay attention to the GPS conditions in EZ GUI. Actually MW doesn't use the GPS altitude at all. If that is the case then there might be an error either in EZ GUI (which I doubt) or an error in the MS5611 Baro code! I had the same situation today...

ezio

Leo wrote:Thanks. I didn't think of GPS altitude

Next time I'll pay attention to the GPS conditions in EZ GUI.

Actually MW doesn't use the GPS altitude at all.

ezio

trogalko wrote:Hi Ezio,

Do You have plan to put EZ-GUI on other android market (which accept paypal) like SlideME?
I'm the one who hate the idea to expose my cc number to google, as I already did that with paypal.
Thanks

Here in France I can pay via PayPal in playstore.
Contact me directly to eziosoft@gmail.com

ezio

trogalko wrote:Hi Ezio,

Do You have plan to put EZ-GUI on other android market (which accept paypal) like SlideME?
I'm the one who hate the idea to expose my cc number to google, as I already did that with paypal.
Thanks

Here in France I can pay via PayPal in playstore.
Contact me directly to eziosoft@gmail.com

ezio

Good work!

ezio

I am also having problems with EZ-GUI using bluetooth on my MWI 2.3 FC's. Problems I don't have have using EZ-GUI & bluetooth with any of my Naze 32 FC's. Trying to set/change PID's on the MWI with 2.3 firmware I get the rotating circle indicating ongoing communication with the FC that never en...

ezio

ok, but would it be able to handle custom MSP commands? I'm playing with creating a custom MSP_SET for setting the ROLLRATE and PITCHRATE variables for flying wings. I had to add two new variables to the conf_t struct and then create a new MSP_SET command & logic for setting these values with t...

ezio

Huge fan of the app, just purchased the unlocker. Having an issue trying to get Nav mode to work, I've been searching for hours with no luck. Everything was working fine on multiwii 2.3, including RTH. I tried upgrading to the Nav version though, starting with the latest nav version B7, then steppi...

ezio

rubadub wrote:quick & easy feature request:
in MISC menu, please add options for changing Power Sensor variables, conf.psensornull and conf.pint2ma.

The MSP protocol supports it?

ezio

@ezio, I have a suggestion and a question 1. I think it would be nice to add the "default home position" in the app. My copter is placed in central Africa whenever the app doesn't have gps data. In some cases, even after establishing the gps fix, the map is not refreshed, and I have to re...

ezio

@above posters I just Upgraded again to 2.3 NAV B7 (witespy 2560). App works just great as ever. (bluetooth). Flew my first SUCCELFUL mission Maybe Try to restart your Phone. My Bluetooth sometimes goes nuts....and cann't connect anymore to anything. @Ezio, Today: For Some reason my *.EL1 file stop...

ezio

Well, you can try increase crosstrack gain to .5 - .7 and also increase the waypoint radius to 200cm.... with a bigger crosstrack gain, it will try to keep the calculated track more aggressively. And with a greater wp radius it will consider the wp reached if it within that radius... May I ask what...

ezio

I'm trying this Nav version for the first time, but after hours, I cannot get it to work. I had a fully working quad with multiwii 2.3, on a crius aiop board, and using the EZ Gui App to configure over bluetooth. However after attempting to use this nav version, I am completely unable to connect to...

ezio

@ Ezio Two idea's for you EZGui. 1) Intergrated info from m (Geomagnetic situation)....to check if Flying on GPS is a good idea or not. (top Left). Today it says Geomagnetic Storm....and if i look to my GPS it's floating around...so not that good. 2) A screen to Popup user specified Pre-Flight Chec...

ezio

@ Ezio Two idea's for you EZGui. 1) Intergrated info from m (Geomagnetic situation)....to check if Flying on GPS is a good idea or not. (top Left). Today it says Geomagnetic Storm....and if i look to my GPS it's floating around...so not that good. 2) A screen to Popup user specified Pre-Flight Chec...

ezio

@ Ezio Two idea's for you EZGui. 1) Intergrated info from m (Geomagnetic situation)....to check if Flying on GPS is a good idea or not. (top Left). Today it says Geomagnetic Storm....and if i look to my GPS it's floating around...so not that good. 2) A screen to Popup user specified Pre-Flight Chec...

ezio

ok, but would it be able to handle custom MSP commands? I'm playing with creating a custom MSP_SET for setting the ROLLRATE and PITCHRATE variables for flying wings. I had to add two new variables to the conf_t struct and then create a new MSP_SET command & logic for setting these values with t...

ezio

Leo wrote:Bart,

2 weeks ago I flew my first Quadcopter.

Yesterday I received my bluetooth module, hooked it up to my quad, downloaded and tried your app.

Love it and purchased the upgrade to support your effort.

Thanks!

Leo

Thank you

ezio

might be a stupid question, but can the CLI feature in EZ-GUI be used to send raw MSP_SET* messages? Or, does it only support the baseflight CLI features? Technically it is possible. Everything you put there is send to the flight control board. But it will be very difficult to do it as you have to ...

ezio

scrat wrote:
ezio wrote:
scrat wrote:Enable baseflight support in settings.
And for now please do not use the PID with naze32. It can set VEL to wrong values.

Thanks. About VEL...ask me how I know. Nothing broken...just alt hold doesn't work.

It is fixed beta version. I also added VEL to pid settings

ezio

What coordinates are displayed in GPS section? What version of MW do you use? Do you have gps on board? Hello, I'm currently absent but I'll try again to see the coordinates and post more info ASAP. It's MW 2.3 and the GPS is a U-Blox Lea-6h on a separate board. The position hold and RTH work very ...

ezio

Hi! Little up for my question, if someone knows how to solve this issue? the maps shows the drone position in Africa, while it is actually in the middle of Europe. It looks like somehow it takes the wrong hemisphere. Anyone had this issue? What coordinates are displayed in GPS section? What version...

ezio

@ Ezio Two idea's for you EZGui. 1) Intergrated info from m (Geomagnetic situation)....to check if Flying on GPS is a good idea or not. (top Left). Today it says Geomagnetic Storm....and if i look to my GPS it's floating around...so not that good. 2) A screen to Popup user specified Pre-Flight Chec...

ezio

Where can I find the newest implementation ?maybe I will have some time to update the EZ-GUI frsky support.

ezio

Ezio, how good is baseflight compatibility in your app regarding pid tuning and cli? Works or not? There are some problems with vel. I will try to fix it asap. Cli works. When connected over BT to naze32 with baseflight...CLI disappears from second screen. Enable baseflight support in settings. And...

ezio

Ezio, how good is baseflight compatibility in your app regarding pid tuning and cli? Works or not? There are some problems with vel. I will try to fix it asap. Cli works. When connected over BT to naze32 with baseflight...CLI disappears from second screen. Enable baseflight support in settings. And...

ezio

Hi, I got MultiWii EZ GUI 3.106.163 running on Google Nexus mobile (previous Model from LG). When I display Dashboard 2 (Anzeige 2) sometimes I could NOT leave the Dashboard - also the softkeys won't display? Can someone help me please? Best regards, Derget Slide you finger from the upper edge of t...

ezio

msev wrote:Ezio, how good is baseflight compatibility in your app regarding pid tuning and cli? Works or not?

There are some problems with vel. I will try to fix it asap. Cli works.

ezio

Hypermobile wrote:Maybe it has something to do with my OLD WindowsPhone running Android.

But the easy fix...IF the file is Empty...Catch it instead of a crashing app.

I will look at it today. Could you send me the log which crash the app?

ezio

Question ? MultiWii EZ GUI works with MultiWii 2.3 navb5 ? because everytime i use it after my copter want to fly by himself... throttle goes out of control and i need to stop the engine ?? So tell me what is the good version of EZ GUI to use with MultiWii 2.3 navb5 ? PLEASE !! It should. But most ...

ezio

could you tell me what you did with the app during the flight? (PID settings etc)

ezio

No Wifi >> But Bluetooth with a little Mod... to extend the range. @ EZIO. Today, 5 Flights....4time a Empty EL1 file :/ (autologging enabled) any clue? the app was working, and giving me voltages etc. What does it means that the files are empty? Could you send one? I tested logging quite hard duri...

ezio

ezio, can you (or someone else) explain FrSky support in EZ-GUI? I don't understand how it works. Tnx! Support for FrSky hasn't been updated for a while now and I will probably remove it in the future. It works like this: You connect multiwii board to frsky receiver (it had to be one with telemetry...

ezio

Logs converter displays the average for each motor too

ezio

EZ GUI log and Virb Edit Quick Test
http://youtu.be/LJXpZh7vU4g

Search found 827 matches