MultiWii

timecop

get off your newb horse, bro.
there's a section in the manual that exactly covers this.
I'm sorry but if you needed more info than that, you should probably drive to your nearest dji dealer asap.

timecop

If 2 5-pin parts in opposite corners (SOT23-5) say "DE=0??" on them, then its max 5.5V. If they say something ilke "|L32?" on them, then its max 16V. Absolute maximum rating for the 16V regs used says +-20V on input - but I would not recommend doing that too often. Also, at 16V, ...

timecop

That's why autoquad flies circles around any multiwii/dji garbage and has onboard mag, RIGHT?

timecop

midrc, and your tx isn't trimmed at 1500.
this stuff is in the manual, come on.

timecop

Did it work before?

timecop

Yea, reassignable leds has been on my todo list for a while.... Especially for afromini...

timecop

Yeah. Anyway, since any new hardware (if any) would use SPI sensors, the point of disabling mag is kinda moot.

timecop

jihlein, we'll need to talk soon

timecop

I wouldn't know how to fix it, since the rotation stuff is a bit hacky.
I think the problem is with mag calibration being done in "original" axes and then rotated.

timecop

Got my 270 size flying pretty good but having an issue when I enable the MAG, after a turn and into forward flight I get a pretty quick yaw to the left anywhere between 5 and 45 degrees, its a quick snap and not a drift. Mag is calibrated and gives sensible numbers in base flight. Should also say I...

timecop

If youre using spektrum why not just use spektrum sat on RC4 pin... or something. Or I tihnk one of cheap LemonRX spektrum clones has PPM out.

timecop

Did you do something dumb like enable feature TELEMETRY.
edit: according to your dump, you did.
So wtf do you expect?
When you arm, port switches to frsky telemtry mode.

timecop

Never tested 27ms firmware, so no idea.
Without scope or logic analyzer there's nothing else you can help with.

timecop

MDY is the one and only date format.

timecop

Or jut type "version" in CLI as the linked post says...

timecop

Hey, thanks for the quick reply. Re the manual, this is what made me think it might be possible:- In addition to standalone stabilization, camera outputs can also be enabled when used as a standard multirotor controller. In case of standard receiver, this limits to Quad mixer. In case of CPPM recei...

timecop

Has anyone seen this bug before? This is with 2.3 firmware. If needed I can get version info from CLI also. The controller is a Naze 32 Acro. The weird thing is that if I put "ARM" command at centre (1500) of AUX2 both end points are showing correct but the centre is not hitting 1500 like...

timecop

I've already told you, i'm on the same reel of MPU6000s that I've had for several years.
(I did buy a new reel recently, but it's going to get wasted because I'm moving to MPU65 for any new hardware).

timecop

They're also listed in drv_mpuXXXX.c as well. If you enter anything other than the value, it'll default back to 42.

timecop

Tricopter + gimbal is not supported, there's not enough timers to do it.
This is mentioned in the manual, I believe.

timecop

and a responsive code maintainer Ah, but that guy (Dominic Clifton) hasn't managed to keep a stable job for more than a year at any place he worked at, since he's impossible to work with in a team, therefore I give it a few more months before he gets bored and moves on to something else, then you'l...

timecop

You can just remove it, and it'll still work (at 64Mhz), which is OK.
I replied you in email, sorry for being late with that.

timecop

works for me, someone submit a pull request to baseflight.

timecop

Yes, board_align_yaw is what you need, should be able to set it to 45 or -45, and it should do what you want.

timecop

Unlikely scenario.

timecop

Seems the channel mapping is wrong ... inherited form multiwii I did solve by deleting all channel mapping in the sbus, spektrum, sumd and ppmsum drivers. // This stuff: data = 988 + (spekChannelData[mcfg.rcmap[chan]] >> 1); // 2048 mode // becomes this: data = 988 + (spekChannelData[chan] >> 1); /...

timecop

How about you start by flying, first.

timecop

Just change your 'reboot_char' (or something smilar, do 'set reboot' or 'set reset' from 'R" to something else, like Z or some other character.

timecop

Something is sending 'R' to your hardware when you plug it in.

timecop

Yes, running OSD together with USB is definitely not supported.

timecop

It's not pin compatible at all.
But yes, you can hot air it off and maybe use some jumper wires or a BMP180 breakout board...

timecop

The only time it would do that would be in hardfault handler, which means error in code.
I've not seen anythign that would cause it tho.

timecop

> Worth noting that after a few seconds, everything powers back up.
Without reconnecting battery?
Or battery needs to be replugged?

timecop

Before posting about some problem that you think exists, make sure you are still seeing it after upgrading to latest firmware. Bug reports without "version" output from CLI will be ignored (at least by me) How to get latest firmware: 1) use baseflight configurator 2) goto firmware flasher...

timecop

bla bla bla bla bla bla bla bla bla
without "version" output or you specifically stating that you're running latest firmware, all these "bug reports" are completely fucking useless.

timecop

midrc...

timecop

What exactly are you trying to do?
Do you need some channels from your radio to go to servos?
If so, set gimbal_flags=4 (i think?) will foward aux 1..4 to RC pins RC5..RC8.
Then you can hookup those to servo(s).

timecop

you can enable gimbal outputs with feature servo_tilt BUT... I don't think that's what you want for headtracker....

timecop

Never heard of omegle until now. Thank you!

timecop

ya blame ablomas for it. his request.
CLI option was added in recent code but it hasn't been built yet.

timecop

You can take me off the list, all my posts are just trolling.

timecop

if you've seen recent commits to baseflight, you probably noticed mpu6500 support is in. yes I assemble the boards and no I don't think you can afford the $60k+ I've invested in my pick and place so far. but it's also very useless for prototypes, unless a board is very complex, it would take longer ...

timecop

Have you tried upgrading firmware....
iterm reset stuff was bugged by mistake in one of the releases...

timecop

Blue led is by power.
Vreg might be toast, you can try connecting a pin with 3.3V to the bottom (facing towards cpu) end of the LED and see if that will power it up, then its vreg that's dead, replace with LP2992/SPX3819/MCP1804/RT9193/etc...

timecop

This post was made by dominicclifton who is currently on your ignore list. Display this post.

Keep your spam limited to your own thread, kthxbai

timecop

Shouldn't need any special mix - most 250-sized FPV stuffs are longer than wider and it works fine.

timecop

I found another BUG

Code: Select all

applyDeadband(accZ, ACC_Z_DEADBAND > 1); // Skypup 2014.09.02

See if you can figure it out.

timecop

http://rayvenn.alnet.com.ua/2013/08/cri ... splay-fix/

timecop

Awesome post. I lol'd and fully agreed with all the points.

-angry troll in japan.

timecop

If you got vibrations to the point where 3dbox is "unstable", you either have waaaaaaaay too much of them or your hardware is broken.

Search found 1880 matches