MultiWii

scrat

I think it will work better. This gps have better reception and will have more satellites.

scrat

Question about GPS. Now I'm using uBlox NEO-6M and it works. If I buy uBlox MAX-7 will this gps work with BF fw?

scrat

Yes. From .zip file

and I'm using BIG fonts.

scrat

So that means I just enable GPS on my phone and connect app over BT with FC and wait few seconds for satelittes to show?

scrat

Okkk, next update, tried with firmware 2.4 hex.. Uploaded it with CT, then uploaded charset... now when I power up the quad the OSD just reads out NOT MAV DATA or something like that... Do I need to enable anything on the naze32??? Tx You didn't read my answer few post back: Harakiri supports mavli...

scrat

Ok, got what you meant after researching a bit... so I undefined that line, uploaded again and tried but still the same.. Flight mode icon does NOT change when swapping between flight modes and the DISARMED status does not change despite the fact I do arm it... I remember that in the regular MW fir...

scrat

Maybe the problem is because i'm using Naze32 - baseflight.

scrat

V2.3 - when in settings screen where you can hide things from OSD...OSD just freezes and all text is scattered over the screen. Have to reboot osd. Yes, I know about the page 8 crash issue, try this: 1) In file config.h at line n. 8 "#define MAXSCREENITEMS 27" change with value 26 2) In f...

scrat

Ouch! Nasty. Yes... I wouldn't trust the baseflight GPS code any further than I could throw my quad... m I would love to see improvement. IMO it's one of the things that is holding back this board in a big way. I know TC doesn't care about it, but the reality is, some people want the safety net for...

scrat

Hello, I'm fairly new to multi rotors, but not new to RC flying. I picked up a few NAZE boards since I wasnt happy with the performance with my KK2.1 I've installed the NAZE (non-acro) board on my new 250mm mini fpv quad. Since I am a poor pilot, I've installed temporarily a GPS for RTH in case I g...

scrat

They didn't saw email yet

scrat

You don't need to change nothing.

scrat

Question about RSSI. I have RSSI cable connected to free pin on atmel proc - minimOSD. And my Rx sending analog RSSI signal. That means I don't need any filter (like on FrSky Rx) for mw-osd software?

scrat

malikipkip wrote:Hi all, need some info on the default motor layout on a Naze32 for a coaxial X8, can't find it in any documentation, would someone be kind enough to point this out to me, need to know in a hurry please? thanks in advance!

octo-x http://www.abusemark.com/downloads/naze32_rev3.pdf - page 6 or quadcopter with 8 motors?

scrat

Just flew my Glass-Quad using Naze32 for first time: AMAZING! Much more lock-in then the KK2. Big thanks to timecop for this amazing f/c! I got both Acro and full version. Will test the full version next. Wonder if it work with my Ublox 6M gps? GoPro view: m neo 6m works like a charm. In CLI just s...

scrat

Hi, Please help me to start working with a MAVLink board and a FAT SHARK 5.8 GHz system. After downloading the KV_Team_OSD_2.3 on the board, the GUI application simulator ON, as in the attached file, it is any signal received, NO Image, NO miniOSD. Yours, Georges If you want mavlink then KV_OSD is ...

scrat

Thanks. I'll try this solution and report.

scrat

haydent wrote:sure that is possibility that i thought of too, and i guess it is a matter of how much time someone wants to put into it vs the need. good to have as comprehensive system as possible. but what if your lipo plug disconnect ? or a esc wire... there are many points of failure

I agree.

scrat

Why can't we implement failsafe RTH to original baseflight and use it with multicopter?

scrat

@fokat: This is how it is done in UAVx project I think. So this is working with original Turnigy Rx which doesn't support failsafe. But time is not 1 sec but is 10sec. @haydent: Yes this is ok till Rx is working and is connected to FC. But what about if Rx stops working or maybe cable from Rx to Fc ...

scrat

servo23 wrote:If you want you can translate it with Google Translate
How can I when I do not know a language.

Ciao, servo

scrat

V2.3 - when in settings screen where you can hide things from OSD...OSD just freezes and all text is scattered over the screen. Have to reboot osd.

scrat

Ciao MHefny Scusa se ti scrivo in italiano. Ho visto il tuo lavoro su arduino due e sono rimasto colpito complimenti. cosi mi sono attrezzato o aggiunto External I2C EEPROM to Arduino (24LC256) m Ma al momento non comunica con la MultiWiiWin GUI vedi filmino, poi ce la SPEKTRUM sat che al momento d...

scrat

moshen wrote:84Mhz, so it worked. Crap, the 432mhz noise is coming from elsewhere and not the Naze32 anymore. emf_avoidance did work, I just forgot to isolate the other components from Naze32 when I ran my test. Sorry for the false alarm!

Maybe minimOSD?

scrat

One question. Can I connect ESC which has output - SBEC 5.5V/4A on Acro Naze or I'll destroy hardware instantly? Thanks! the acro rated for 5.5v max. some people get away with 6v. I would measure the output with a multimeter to decide. Have measured with multimeter and ESC outputs 5.6V So external ...

scrat

One question.

Can I connect ESC which has output - SBEC 5.5V/4A on Acro Naze or I'll destroy hardware instantly?

Thanks!

scrat

timecop you da man! Thanks!

scrat

deleted

scrat

You have to have wel calibrated MAG sensor and right magnetic declination for your place and RTH will work.

scrat

JonnyQuest wrote:Guys, of course I tried calibrating sticks. It still shows 1500 in GUI and 1527 in Turnigy. Global subtrim in the firmware would make much more sense in these cases...

? Never saw this kind of anomaly.

scrat

Aha. Thx!

scrat

3S lipo and you're good to go! And no. 1100g is not to heavy for your setup. I have same motors (1000kv) and 10x4.5 props 3s battery...my quad weighs 1300g and goes up at 50% throttle.

scrat

If you have Futaba, then you have stick center at 1520us.

scrat

+1 and use subtrims for setting stick center.

scrat

Hi, both the board and RX were quipped with this: (yes, there were two of those on board) m Both the board and the RX were powered by an external 5V 5A switching BEC. The BEC of the ESC was deactivated. This is what I meant with, that thing was constructed idiot-proof. You didn't answer...what FC d...

scrat

And BT is limited to 100m max.

scrat

Set gps_type=1 for UBLOX and you're done.

scrat

AUX 1 and 3 - max value is good but min must be below 1100.

scrat

Where is EOSbandi?

scrat

scrat

Just loaded latest BF version with BF Configurator...with alt hold improvement...now GPS get's satelites in about 1 minute and it is cold start. Thanks to all developers.

scrat

Crashpilot1000 wrote:As far as I know there is no easy way to flash the Frsky D4FR.
Cheers Rob.

As far as I know FrSky D4FR does not have any sync problems.

scrat

First of all. Set sticks center to 1500...you have them at 1512. Use subtrims. And MultiWii is not piece of shit...you'll have the same problems with Naze32.

scrat

No. Every radio is different.

scrat

What? Why then for flying wing? Yuo can find fw for aeroplane.

scrat

I'm about to fly Cleanflight on my CC3D board - with WS2812 led's and updated PPM code: m ups, that explains some nasty situations i had when testing new functionality. up to now i didn't trust frsky to much ... as i run occasionally into problems. thanks for showing the problem! Just upgrade fw on...

scrat

Aha.

Thanks!

scrat

timecop wrote:Due to removal of SBAAS thing, I need to hack that back in as an option.

Please do and thank you. Question is, why as an option?

scrat

But GPS takes at least 5 minutes or more to get about 3 satelites. Version 30.4.2014 gets gps satelites in about 30seconds.

scrat

Futaba has 1520 center.

Search found 925 matches