MultiWii

scrat

Uf. Then not for me. Thx!

scrat

How much and where can I buy this fc?

scrat

What is the difference between AfroFlight32 rev5 and Pro version? Thx!

scrat

Upgrade to version 2.3. 2.1 is too old.

scrat

Did you calibrate all esc's? And you must have sticks travel from 1000 to 2000 and midpoint must be at 1500 because on your picture you don't have mid sticks at 1500.

Maybe this will help: http://witespyquad.gostorego.com/videos.html

And do not use old version of MultiWii WIN GUI. Use MultiWii GUI - java gui instead.

scrat

How heavy is your quad? What motors do you have and props? Did you calibrate all esc's at once with ESC_CALIB_CANNOT_FLY?

scrat

test flew today a Balsa/Ply built up mid wing plane today with Rev4 acro and $20 Ublox NEO6 with Patrick's programming and it worked flawlessly straight away. I've always used Eagle Tree for my fixed wings in the past but this Naze32 and GPS set up is so compact/light and cheap I'm so impressed. Ju...

scrat

Something is wrong then with horizon mode. You're not the first reporting that.

scrat

@Kaysee OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review We are only using BOXIDS on the HUD also. Sorry for the inconvenient -KV Hi. So there will be no BOXNAMES anymore? HiScrat, W...

scrat

Thanks for answer.

scrat

You're not missing anything - and gcc target is generally tested by others, so it should build and work. The only supported config tho is gcc-arm-embedded, other crap like codesourcery, yagarto, gnuwinarm or whatever, all those things have had problems, mostly libc/nanolib related. Care to take a l...

scrat

I think with 10Hz...there will be no improvement. This GPS doesn't support 10Hz refresh rate.

scrat

@Kaysee OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review We are only using BOXIDS on the HUD also. Sorry for the inconvenient -KV Hi. So there will be no BOXNAMES anymore? HiScrat, W...

scrat

kataventos wrote:@Kaysee

OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review
We are only using BOXIDS on the HUD also. Sorry for the inconvenient

-KV

Hi. So there will be no BOXNAMES anymore?

scrat

You have fried stm32.

scrat

Do you have the latest FW on your FC? And are you using PWM or PPM connection to the board?

scrat

also, no offense to anyone, but do any of you actually know how to program this cind of micro controller? That would be very helpful, because I think this whole thing could be fixed with one line of program, unfortunetly I do not know hot to do that. What FC you're using and what version of MultiWi...

scrat

You have major problem with ACC. Did you calibrated ACC and your FC must be level when calibrating acc.

scrat

I saw this warning re GPS sat lock & Baro temp drift on RC Groups Arducopter/APM 2.5 Avoiding "GPS glitch" and fly-away is NOT Rocket Science You must ALWAYS wait 5 minutes OUTDOORS after connecting Lipo BEFORE Arming to fly. During those 5 minutes; 1.GPS will drift [usually a LOT!] t...

scrat

So. Where to connect sonar on rev5 board?

scrat

Ok. Great you found the problem.

scrat

AFRO esc's have simonk firmware. So in config.h set mincommand to 1000 and minthrottle to 1064 and maxthrottle to 1950. Then calibrate all esc's with ESC_CALIB_CANNOT_FLY function in config.h. uncomment #define ESC_CALIB_CANNOT_FLY load sketch to FC. Then REMOVE PROPS!!!! Turn off Tx. Connect batter...

scrat

On the video I see that you have some oscilations going on...lower PID's and set MPU6050 - LPF_FILTER to 42Hz.

scrat

sasquad wrote:Thank you, do you have experience buying from them? Service and support good?

Yes. Did bought the same board and gps. Very fast shipping.

scrat

Did you read basic manual for this FC?

scrat

Why? Afro's are not science fiction esc's. Post your own config.h file here.

scrat

westwind wrote:Yes, I have calibrated about a dozen time in various ways, no joy. Thinking of erasing the EEPROM and starting over

Good thinking.

scrat

You're using 12x3.8 props on 1000kv motor? 10x4.5 is enough. My quad weigh 1275g. I'm using 1000kv motors and 3S battery. I have plenty of thrust.

scrat

Set mincommand to 1000. Then set minthrott: 1064 and maxthrottle: 1950 and then calibrate all esc's at once. To do this you must uncomment #define ESC_CALIB_CANNOT_FLY, flash this hex to FC and disconnect USB. IMPORTANT: REMOVE PROPS!!!!!! & turn off Tx. Then connect battery to copter and wait a...

scrat

I would rather buy:

http://www.rctimer.com/product_765.html

http://www.rctimer.com/product_984.html

scrat

There was no flyaway.

scrat

Do not fly in angle mode but in plain acro instead. Set Tx sticks travel from 1005 to 1995. Then calibrate all esc's. But if quad flipped over then check motor so they turn in right direction, maybe props are wrong...or esc's are connected wrong on the fc.

scrat

Aha. Thx.

scrat

FYI. EZ-GUI works on BlackBerry Z10. PIDs, AUX....map related stuff doesn't work.

scrat

I did not mentioned before but my board is a multicopter flycam black 32. GPS is not working (when connected to pc I can see GPS is detected by the board and signal is fixed but when flying the quadcopter it does nothing when I ask him to fix its position) with the May 20 baseflight version so that...

scrat

set gps_type=1

and reset your gps to default in u-blox center software. Baseflight FW will take care of settings.

scrat

If you can't arm with stick then you must extend stick throws. They must go from 1000 to 2000.

scrat

Hi Waltr, I tried to set the values to 1500, I used the trim buttons, but nothing, the problem is always the same. When I accelerate, each motor runs at different speeds, and even constant, and the indicator goes up and down quickly. Pretty much what should I do? Do you have any howto to tell me?...

scrat

I have FW from 02 June 2014. And I my beep sound from ESC is changed...before they were beeping very fast for 3 cellbat and final beep. But now 3 beeps and then 1 second pause and then 4th last beep. I don't know what was changed.

scrat

It was typo. I meant BOOT pins. Shorten them with paper clip, then connect usb cable to computer, run baseflight configurator (program in Google Chrome browser) and select Flash Firmware, then click Load Firmware Online, wait few seconds and then click Flash Firmware. If FW load is successful, then ...

scrat

Shorten bot pons and connect usb to computer and then flash new firmware.

scrat

Hi devs. Sorry for asking. When you'll release v2.3 of kv-osd?

scrat

I've tested the latest bf from 2.6.2014...but I use CPPM so don't know about PWM bug. But I know that GPS is working better then before. At least for me. My quad stayed in max 1m with PH and there was a little wind. So very good. Return to home works good like before.

scrat

So please...tell us "ordinary users" wtf is going with good baseflight FW? Dead? Why? And what nasty hardware bug in rev5 (mine is purple) is it?

scrat

timecop wrote:
scrat wrote:
timecop wrote:OK, the GPS fix stuff is merged.

This means?

Yes, don't get your hopes up that GPS is actually working

Just asking. But for me GPS works. GPS PH and GPS RTH.

scrat

timecop wrote:OK, the GPS fix stuff is merged.

This means?

scrat

Since we cannot link failsafe to RTH and RTH is not reliable why buy FunFly Controller "Naze 32" Robert Nobody is forcing you to buy anything. Infact, if GPS is what you want, look no further than DJI Phantom Vision V2+, and stay the fuck away from opensource projects. Timecop I didn't sa...

scrat

Having designed the hardware and written 95% of the firmware (of the "new" code, not stuff transplanted from multwii), I think I'm qualified to determine what's user error and what's not. Anyways, problem solved by using the power up sequence, first battery then usb. Great you've found a ...

scrat

Change the Tx. And if you'll have futaba, then you must center sticks at 1520.

scrat

simonk FW on ESC's...no CONS.

Search found 925 matches