Search found 827 matches

by ezio
Mon Dec 29, 2014 8:34 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

MultiWii EZ-GUI

can somebody tell me what problems do you have with the pre 2.4 and EZ-GUI?

I can see on few posts that EZ-GUI doesn't work with this version of MW.

Sent from my Nexus 5 using Forum Fiend v1.2.14.
by ezio
Mon Dec 29, 2014 6:11 pm
Forum: Software development
Topic: pre 2.4 version r1729
Replies: 100
Views: 49237

pre 2.4 version r1729

switch back for the moment version number to 230, but winGUI will have to handle 240 for final 2.4 I think it is wrong signal if we effectively cripple the version number only to please some (albeit honored) 3rd party app. If they test for ==230 then it is either intended or plain wrong and bad. +1...
by ezio
Sat Dec 27, 2014 10:45 pm
Forum: Software development
Topic: GPS NAV
Replies: 964
Views: 401385

Re: GPS NAV

Hello Ezio, Thank you very much, taking care about my question. Today I have investigated another flight, with the same mission. The mission waypoints: MultiWii_Mission_Ickstadt_2014-12-09_center.jpg The flown course (Google Earth): Mission_201412091559_GoogleEarth.jpg Spreadsheet diagram of GPS co...
by ezio
Fri Dec 26, 2014 3:54 am
Forum: Software development
Topic: pre 2.4 version r1729
Replies: 100
Views: 49237

Re: pre 2.4 version r1729

Navigation Compatibility flag is set even when MSP_WP is disabled in config.h which doesn't make sense.
Please fix it.
by ezio
Fri Dec 26, 2014 3:51 am
Forum: Software development
Topic: Why development has stopped?
Replies: 230
Views: 74490

Re: Why development has stopped?

I got the gut feeling this here is bound to die. Captain prefers to let the ship sink. Devs flee the ship faced with the results of their competence. I joined here 2 years ago. I did learn quite a lot. But i never got some respect for suggesting stuff or pointing out bugs. Now there is nothing left...
by ezio
Fri Dec 26, 2014 1:24 am
Forum: Software development
Topic: GPS NAV
Replies: 964
Views: 401385

Re: GPS NAV

Hello, I have a question to the log parameters course (from GPS) and head (from MAG). The first waypoint is in South-West, The number of satellites was 7 while the mission. MultiWii_Mission_Ickstadt_2014-12-09_center.jpg The flown course is extracted from the EZ-GUI log file, converted to a .kmz fi...
by ezio
Wed Dec 24, 2014 7:57 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

MultiWii EZ-GUI

wow ! thanks for that!
I was pulling hairs from my head because I couldn't reproduce the problem.
I didn't think about config.h.

btw Merry Christmas to you all!

Sent from my Nexus 5 using Forum Fiend v1.2.14.
by ezio
Tue Dec 23, 2014 12:31 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

@Ezio do you know, why there is no heading logged...Yes there is but heading...is the direction of movement, So if you fly sideways...heading turns by 90 degrees, but your quad hasn't turned 90 degrees. Would be useful information to log. (ie. Video overlay, Earth FPV. maybe the future of FPV flyin...
by ezio
Thu Dec 18, 2014 3:03 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

MultiWii EZ-GUI

bump on my request to add an 'auto-connect' option for the BT, so that it will cycle through the list of configured BT adapters and try to connect to whichever is available. It doesn't seem like it would be a very complicated feature to add. Please consider, thanks... cycle through the list of devi...
by ezio
Thu Dec 18, 2014 2:58 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

MultiWii EZ-GUI

hello, When I try to save pid (not to send to drone but to save in my tab) I get an error "ez-gui s'est arrété" (i'm french). how to fix this? NB: I installed a SD card after ez-gui (on a samsung tab 3). , is it a problem? Thank you for your help J.F. this is a bug in EZ-GUI. it will be c...
by ezio
Fri Dec 12, 2014 4:42 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

1. log your flight with EZ-GUI (logging starts automatically after arming the motors if automatic logging is enabled) 2. fly 3. convert the log to KML first person view in EZ-GUI logs converter 4. transfer and open the file on pc in Google Earth. 5. enjoy Thanks for your reply, But how to log the e...
by ezio
Fri Dec 12, 2014 4:40 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

scrat wrote:Sorry for asking. Did you fix bug for zeroing VELOCITY PID's in baseflight?

If you set the protocol to baseflight it should be fine.
by ezio
Fri Dec 12, 2014 6:44 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Google Earth FPV: m Wooohh,awesome !!! How do you do that ?? Thanks 1. log your flight with EZ-GUI (logging starts automatically after arming the motors if automatic logging is enabled) 2. fly 3. convert the log to KML first person view in EZ-GUI logs converter 4. transfer and open the file on pc i...
by ezio
Thu Dec 11, 2014 11:14 pm
Forum: Software development
Topic: pre 2.4 version r1729
Replies: 100
Views: 49237

Re: pre 2.4 version r1729

When i have tested the NAV B7 code earlier i have got strange errors in Eos Wingui. I discovered that it "crashes" if you don't uncomment #define USE_MSP_WP It seems it cant run without it!.. Thank you PatrikE, You saved my day. Now WinGUI B7 works with MultiWii pre 2.4 r1729. I could pla...
by ezio
Thu Dec 11, 2014 6:07 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Google Earth FPV: http://youtu.be/uVTNC1_nkMY
by ezio
Wed Dec 10, 2014 4:07 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

by ezio
Mon Dec 08, 2014 9:38 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hi ezio, I have a bluetooth issue here with a JY-MCU (slave only) on Android 4.1.2 mobile phone, NAZE32 and cleanflight. Everything is fine, if I disconnect the device before closing the app - or the auto-bluetooth-disconnecting-on-app-close is disabled. If auto-bluetooth-disconnecting-on-app-close...
by ezio
Mon Dec 08, 2014 12:56 am
Forum: Software development
Topic: pre 2.4 version r1729
Replies: 100
Views: 49237

Re: pre 2.4 version r1729

PatrikE wrote:When i have tested the NAV B7 code earlier i have got strange errors in Eos Wingui.
I discovered that it "crashes" if you don't uncomment
#define USE_MSP_WP
It seems it cant run without it!..


USE_MSP_WP enables waypoints navigation
by ezio
Sun Dec 07, 2014 11:11 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Actually it seems that each time I power cycle the quad I have to connect with my PC first. I'm guessing this is something to do with my bluetooth module. I'll pickup a couple of "dumber" ones where to baud has to manually be set and see if this resolves the issue. Thanks, Jared Do you ha...
by ezio
Sun Dec 07, 2014 2:06 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Love the app! I think I purchased the unlocker about 30 minutes after installing it! One small issue I have is that I cannot seem to get connected with Cleanflight by manually selecting it. I get time out errors once it connects. However if I use 2.3 everything seems to work ok. Any ideas? I'm runn...
by ezio
Sat Dec 06, 2014 11:45 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

I'm waiting for naze32 board. When it arrives I will check this.
by ezio
Sat Dec 06, 2014 8:03 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

OK, this might have been my fault by using auto connect, instead of selecting baseflight. I now have ACC in the PIDs, and even trim is back. Can someone confirm this before I trek on out. Automatic protocol selection works only for multiwii. For baseflight anc cleanflight you have to select it manu...
by ezio
Fri Dec 05, 2014 7:29 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

I'm working on dashboard 4. Amperage will be there.
As for now you can check it in Raw Data section.
by ezio
Thu Dec 04, 2014 5:59 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hi Ezio, It just crashes with "Unhandled exception" and something about zero not valid. I am running Win8.1 so tried Win7 Compatibility mode with Run As Admin ticked still same. I was running Pre10 for B7 OK in Compatibility mode previously with no stability issues. I'll just use MWConfig...
by ezio
Thu Dec 04, 2014 4:30 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hello ezio, I just tested the new MultiWii version 231r1729 and have seen, that EZ-GUI unfortunately does no longer work. Do you will bring an update already for this version, or will you wait for the next official release 2.4? Regards, Rudolf I plan to update it as soon as possible. Probably next ...
by ezio
Thu Dec 04, 2014 4:13 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hello ezio, I just tested the new MultiWii version 231r1729 and have seen, that EZ-GUI unfortunately does no longer work. Do you will bring an update already for this version, or will you wait for the next official release 2.4? Regards, Rudolf Why it doesn't work for you? It should works OK when yo...
by ezio
Wed Dec 03, 2014 6:48 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hello ezio, I just tested the new MultiWii version 231r1729 and have seen, that EZ-GUI unfortunately does no longer work. Do you will bring an update already for this version, or will you wait for the next official release 2.4? Regards, Rudolf I plan to update it as soon as possible. Probably next ...
by ezio
Wed Dec 03, 2014 3:49 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Trims are available only for naze32 boards. I have to update it as MW2.4 supports it as well. ok, perhaps that's why I didn't see it. Is the button hidden upon connecting & detecting that it's running MW2.3? So, I'm assuming that is it currently not possible to adjust the trims via the MW proto...
by ezio
Wed Dec 03, 2014 8:06 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

More then 1K posts in this topic.
WOW!
by ezio
Wed Dec 03, 2014 8:05 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Trims are available only for naze32 boards. I have to update it as MW2.4 supports it as well.
by ezio
Sun Nov 30, 2014 11:47 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Image
by ezio
Sun Nov 30, 2014 1:32 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

But what about the unlocker? Reinstalled that one, but it says, unlocker need to be updated Indeed. Breaking the application for paying customers is somewhat sub-optimal. It states 'Unlocked' and refuses to function further. Please fix. Remember you are using beta version! You have to use unlocker ...
by ezio
Sat Nov 29, 2014 8:29 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

@ Ezio After last update, app Crashes (doesn't even startup) uninstalled Unlocker & App reinstalled everything. Still nothing I just pushed new update. It should be available in couple of hours and probably it wont crash again. Yep,its fixed now. But what about the unlocker? Reinstalled that on...
by ezio
Fri Nov 28, 2014 8:08 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

Hypermobile wrote:@ Ezio

After last update, app Crashes (doesn't even startup)
uninstalled Unlocker & App
reinstalled everything.

Still nothing :-(


I just pushed new update. It should be available in couple of hours and probably it wont crash again.
by ezio
Fri Nov 28, 2014 6:56 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

@ Ezio After last update, app Crashes (doesn't even startup) uninstalled Unlocker & App reinstalled everything. Still nothing You are taking about update which has been released today? Beta version? Could you send a bug report? If it is a beta go here m And finish test and reinstall old version...
by ezio
Thu Nov 27, 2014 10:40 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

scrat wrote:Hi Bart.

There is a bug again in the latest version of MWii EZ-GUI when using with original baseflight. When setting PIDs....again VELOCITY goes all to 0. Could you be so kind and repair this bug.

Thanks.


Have you chosen Baseflight protocol in settings ?
by ezio
Mon Nov 24, 2014 5:45 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

handsomejackuk wrote:any idea why the voice data works on my one phone but not on my other ?

Voice data?
by ezio
Sun Nov 23, 2014 5:42 pm
Forum: Boards
Topic: CJMCU microquad board
Replies: 161
Views: 114069

Re: CJMCU microquad board

@idreams_ir for running the firmware Boot0 pads need to be bridged all the time. You only need to open the bridge again if the firmware is broken and you are not able to start bootloader mode via the GUI. @eizo For Baseflight the is no actual hex available. If I’m back on my computer (sometimes dur...
by ezio
Fri Nov 21, 2014 2:11 pm
Forum: General discussions
Topic: MW Statistics November
Replies: 4
Views: 1663

Re: MW Statistics November

I presume that is invocations of the ezgui app? What a surprise to see a version 2.32 whereas MWii only recently went to 2.31. Do you have any info on what flavours/forks of MWii firmware (original, baseflight, cleanflight, kamikaze or whatever ) those are? Yes the data comes from EZ-GUI(20 days). ...
by ezio
Fri Nov 21, 2014 6:09 am
Forum: General discussions
Topic: MW Statistics November
Replies: 4
Views: 1663

Re: MW Statistics November

capabilites.PNG
by ezio
Fri Nov 21, 2014 6:09 am
Forum: General discussions
Topic: MW Statistics November
Replies: 4
Views: 1663

Re: MW Statistics November

sensors.PNG
by ezio
Fri Nov 21, 2014 6:08 am
Forum: General discussions
Topic: MW Statistics November
Replies: 4
Views: 1663

MW Statistics November

versions.PNG
by ezio
Fri Nov 21, 2014 5:33 am
Forum: Boards
Topic: CJMCU microquad board
Replies: 161
Views: 114069

Re: CJMCU microquad board

is there a working baseflight hex for this ?
by ezio
Thu Nov 20, 2014 12:16 am
Forum: Software development
Topic: Alt hold with sonar
Replies: 6
Views: 2715

Re: Alt hold with sonar

I have seen some pretty good demonstrations but all were under nine fleet. my personally testing with sonic measurement accuracy was best under six feet. In my opinion, ultrasonic would be a great addition for auto-landing but beyond that, it is useless for anything other than hovering between 6 to...
by ezio
Wed Nov 19, 2014 7:36 am
Forum: Software development
Topic: Alt hold with sonar
Replies: 6
Views: 2715

Alt hold with sonar

Why we still don't have altitude hold with sonar? We have sonar supported for years now, alt hold using sonar has been successfully implemented in MW 1.9 ( as I remember correctly). The code for 2.2 and 2.3 exist and it works very well (youtube). What is the point to support 5 different sonar sensor...
by ezio
Fri Nov 14, 2014 9:33 pm
Forum: Ideas
Topic: Hex files for most popular boards
Replies: 7
Views: 3634

Re: Hex files for most popular boards

integrate tarduino compiler into the uploader. problem solved. include config.h editor too. oh, wait... Actually software like this already exists and it is quite nice. m http://www.lynxmotion.com/images/png/model.png I still think that providing hex files with possibility to easy upload it from PC...
by ezio
Fri Nov 07, 2014 6:50 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

I think it would be very usefull to have the possibility, from EZ-GUI, to change PINT2mA and PSENSORNULL parameter in order to do a fine tune of the current read, as it is alresdy possible with VBatScale to adjust battery voltage reading. Thankyou in advance Diego. It is not be implemented in the p...
by ezio
Thu Nov 06, 2014 7:16 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621452

Re: MultiWii EZ-GUI

On EZ-GUI is it possible to have current and mAh indication? I have an Allegro ACS758 device to misure the current and I set on config.h the powermeter hardware sensor. So from CRIUS V.2 the info is available. Thankyou for reply Diego mAh indication is already there, in example in Dashboard 3 - pow...
by ezio
Thu Nov 06, 2014 8:24 am
Forum: Ideas
Topic: Multiwii logo contest
Replies: 21
Views: 7785

And?
by ezio
Sat Nov 01, 2014 8:23 pm
Forum: Software development
Topic: New MSP command request
Replies: 7
Views: 3926

Re: New MSP command request

Or maybe this is better solution http://www.multiwii.com/forum/viewtopic.php?p=57855#p57855 Hi, Back on this topic here (to keep clean GPS navigation topic). Instead of introducing this complexity for all case, I have another suggestion. MSP_VERSION is not currently used in MSP_IDENT. (always 0 cur...