MultiWii

@jy0933 Hi ! Both GUI's original and this one work with BT dongle @11520 with little problems (reseting BT helps) try to download Asus BT stack (free driver). I'm using Asus USB/BT - windows will create two serial ports (in my case 34 & 35) connection is possible only on port with higher #. Peo...

both original gui and wingui does not read data from board thru bt... I manually rate to 9600..

any idea why ... tx/rx/vcc/gnd are corrected between bt&fc

this might sound dumb.. a calib gyro button in gui(or set it to calibrate along with acc)?

HI

I got a quadrino and using mw2.1 rc..... I wonder if the gps i got will be used in mw?

I got the Trimble gps receiver from herehttp://www.multiwii.com/forum/viewtopic.php?f=11&t=687

then will use http://www.rctimer.com/index.php?gOo=go ... oodsid=762 to "convert" ftdi to iic.....


thanks

Quadraf wrote:Or maybe this is something for you...:
http://code.google.com/p/mwc-prelude/

lol

for me and not for me.

i came up with this idea is just to help other people... myself dont have problem with manual config

that is a great work tho

Fried_Onion wrote:there is already something like that have a look at http://panoramaic.se/configurator/

wow

how come I've never heard about that... it's just so awesome..

there are space for improving.. but this is just so good already

there are also PID for
ALT/ VEL/ GPS/ Level/ Mag

I'll be using mag/level/gps a lot... wondering how to you deal with/turn them? or just leave it?


thanks

[purely idea] i can read code... but barely got idea how to make gui I probably have seen similar gui/program for other thing. here's the basic idea currently we need to open sketch and manually look for the corresponding sensor/code. uncomment to activate.... this is more like the geek's way.. the...

i can do tablet ver test feedback.. still waiting for my bt module tho

do you plan to port to tablet in the future? so it can be more like mwc having everything in one screen

great work

awesome work

but I dont know much about progmin ... where should i insert the code.. and assign it to switch on/off the functions?

thanks

I think it would be a great idea, Maintaining this website is not free I am sure. yeah.. maintaining the entire community is not a cheap thing.. so does the dev kits. but when it is direct related to the community/proj.. need a good way to prevent people from thinking it is mwc community doing comm...

speaking of commercial... this might sound interesting... board manufacturing & retailing. preloaded with mw then donate portion of profit to the community (this is what I saw from reflash esc in RCG... that is not a massive prod yet.. but could be a good model...also I wonder the if commercial ...

i think it is definitely moving forward... there is no reason staying not to jump to new faster chip platform to gain either better performance and opportunity(more functions possible ) while maintain at a relative low/reasonable price. my answer to 2. the more functions add to fc the better proc is...

how abt naza 32? board.. I didnt check the memory .. but faster processor...and pretty good price

my understanding of their initial goal is pc controlled drone... more on point to point movement.. kind of patrol like mwc atm is manually control at most.. also.. I think it wont be hard to improve mwc to AQ stage.. after PID set altitude control : auto-level w/ baro & sonar( rpm feedback from ...

solved... solution...debug process on first post

can i get a quick tutorial for installing it on ubuntu?
i'm not so familiar with linux yet.. but it is the only netbook I have that is easy to bring outside for tuning

thanks

a feedback on this
I did exactly what you said ... not working for 1.9 2.0
but it WORKs for dev.
interesting

how about the efficiency and probably flight time? since im just beginner. i really'd like to have it fly longer.. and try/train acro... larger battery adds weight and flight time.... I wonder if I want loger acro time.. should I get large batt or several, say 1500, for change?


thank you

im just a bit worry about 1. if i pitch/roll over 60 degrees ( then the direction jump to be the opposite direction) 2. the slow direction tracing, say I already turned from N~W, but it takes a while for the reading changing to W. the delayed direction hold might cause problem 3. the "dead spot...

thanks for reply I just got the board not for long. Im only doing calibration/checking all electronics working properly. didnt tune pid yet. but I did write after all calibration. maybe a bit explanation of the vid first half is rotating the board (yaw) and you can see at some point SE->E->N has a j...

ended up getting a wrong sensor cuz it rev1 and diff sensor

but i feel the mag axis is not quite right.. how do i find the correct orientation for mag axis?

http://www.youtube.com/watch?v=OJAyoHnMIY4

the board is rotating slowly.. but the mag appears not quite pointing to right direction...


any idea

hey folks..... I decided to start with a micro instead of my huge x525 (that was a arf kit).. But I got no idea if these parts putting together will work or not? any suggestion/advice is appreciated frame Quad http://www.hobbyking.com/hobbyking/store/__22607__Turnigy_Integrated_PCB_Micro_Quad_KIT_.h...

bill516 wrote:When I mean close I meant a couple of cms or inches which ever measuring system you use.

that'd be a none. at least 15 cms away from anything, middle in the air... the cable is about 20cms... so 20cms away from pc .. and nothing else is closer to that... i suspect it is a broken unit?

ok.. i will go try to calibrate it outdoor and see how it goes... probably it's just cuz I got so many electronics in my cabin

it pops up saying
"the method hidelable(controller) in the type multiwiiconf_2_0 is not applicable for arguments (checkbox))

ubuntu 10

how do i solve it?

thx

I dont have any in hand.. but it is really hard to find any that has knowledgable users as many as RCG

ok
i'll try it again when i get back home

thanks

update: mag still break... it only points to roughly south in conf... no other direction
broken?

I wonder if any encountered the same problem? But I really appreciate some help on this. after click the cali_mag, I rotated the board on all axis. nothing attached, only usb cable..and I was holding usb cable while rotating. after the light went off. the direction indicator on the MWC still shows a...