Search found 30 matches

by ankimo
Wed Oct 07, 2015 7:22 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

There's a minimum 5 sat set generally in the code for FIX. Gps code is blocked if not FIX. I guess you can modify the limit if you want. But the thing is Planes use GPS also for altitude and a good 3D fix is a key. The number of the satellite also occurs to this phenomenon by 9. Reproducibility is ...
by ankimo
Mon Oct 05, 2015 2:11 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

If the speed is lower than 5m/s it will increase throttle to force the plane forward. When speed and altitude is correct it will use cruise throttle setting. Hi PatrikE It was settled. gps - pachi wasn't being used. Let me question about one, please. When using a GPS of MTK3339 by I2C, a GPS doesn'...
by ankimo
Mon Sep 28, 2015 9:17 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

I'm using the version of 140402 and a GPS of I2C connection.

The throttle value of the time of RTH is established low in GPS.h, but it's full throttle.
What is considered as the cause?

The height which is at the time of RTH operation is high sufficiently.

Thank you
by ankimo
Tue Oct 07, 2014 1:49 pm
Forum: Software development
Topic: ios+multiwii,appstore release inside, check details, twitter
Replies: 103
Views: 693769

Re: ios+multiwii,appstore release inside, check details, twi

Hi

I am using TX of MODE1.
Under the present circumstances, TELEMETRY (RADIO) is not correct.
Is selection of MODE possible?

Thanks
Kazz
by ankimo
Tue Oct 07, 2014 9:45 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

Hi PatrikE

I am using NanoWii and i2cGPS.
I want to display an altitude and a direction on OSD.
Where should the following code be added?

Code: Select all

    #define FORCE_ALT_DISPLAY  
    #define FORCE_HEADING_GRAPH


Regards
Kazz
by ankimo
Mon Feb 03, 2014 3:30 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

Hi

140109 was tried.
It seems that the distance to home of OSD is wrong as compared with 131225.

My test environment
i2c_GPS:I2C GPS NAV V2.2 Beta1 (R62)mod
OSD:KV_Team_OSD_2.2_20131221

Thank you
by ankimo
Fri Jan 17, 2014 6:32 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324066

Re: Airplane mode RTH

Hi

131225 did very good work.
https://www.youtube.com/watch?v=YWtXWg3MrmU

I try 140109 this weekend.

Thank you
Kazz
by ankimo
Sun Nov 17, 2013 2:49 pm
Forum: Software development
Topic: ios+multiwii,appstore release inside, check details, twitter
Replies: 103
Views: 693769

Re: ios+multiwii,appstore release inside, check details, twi

configurator was terminated.
And connection was tried again.
The BOXES/AUX selective state was reflected this time.

Multiwii_BLE_115200.bin
no error message
How-to was read
uart speed:115200
mutiwii version:2.3
Hexacopter X on connect screen

Thank you
Kazz
by ankimo
Sun Nov 17, 2013 5:30 am
Forum: Software development
Topic: ios+multiwii,appstore release inside, check details, twitter
Replies: 103
Views: 693769

Re: ios+multiwii,appstore release inside, check details, twi

Hi

Since the BLE board arrived, it installed in 5S.
Bluetooth search is quickly comfortable!

However, a setup of BOXES/AUX is not reflected.
Have I made a mistake in usage?

Thank you
Kazz
by ankimo
Fri Jul 27, 2012 12:36 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Mr. MichalM_sk
The result of modification is very good!
Thank you :D

http://www.youtube.com/watch?v=Nm0M61-nrc4
by ankimo
Tue Jul 24, 2012 8:07 pm
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

MichalM_sk wrote:
ankimo wrote:Pre7(FINAL)Test report

Probably the direction of home is reverse. ;)

http://www.youtube.com/watch?v=y3wfyfLB9Qw

Kazz


I will check this problem.


Are other users OK?
Does my environment have a cause?

Kazz
by ankimo
Sun Jul 22, 2012 1:55 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Pre7(FINAL)Test report

Probably the direction of home is reverse. ;)

http://www.youtube.com/watch?v=y3wfyfLB9Qw

Kazz
by ankimo
Fri Jul 13, 2012 1:24 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Test report

HOME arrow loses its shape in OFF of latitude and longitude display.

Kazz
by ankimo
Fri Jul 06, 2012 4:17 pm
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

It is wonderful!
I am ready for debugging always. :D

Kazz
by ankimo
Wed Jul 04, 2012 1:04 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

>dont worry I am working on changes. I would like to release PRE7 this week.
It is wonderful. :D

The question about Radar screen
Possibly the position of a home display is a right-and-left contrary?
http://www.youtube.com/watch?v=d1FbfjryVxc

Kazz
by ankimo
Mon Jun 18, 2012 10:49 am
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 880191

Re: GPS integration

Please give me advice.
A strange phenomenon occurs in the second half of RTH.
HOME-DIST is displayed as 1220m and a motion is also strange.
What is a cause?
http://www.youtube.com/watch?v=czejk3rw5ow

Kazz
by ankimo
Thu Jun 14, 2012 6:31 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Hi Mr.MichalM_sk

Is it dm/s?
It overflowed with the usual movement speed (about 30 km/h).
It is over 999.

Kazz
by ankimo
Mon Jun 11, 2012 1:19 pm
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Hi Mr.MichalM_sk

What should I do for displaying GPS Speed correctly in pre6?
Speed is not correctly displayed as well as Video of Mr.Y.Mita.

Kazz
by ankimo
Mon May 28, 2012 3:14 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Hi Mr.MichalM_sk In the following combination, serial communication is impossible. -mobiDrone_2.3_pre6 -multiwii_2.0 for mobiDrone_2.3_pre6 -CRIUS SE In the following combination, it is satisfactory. -mobiDrone_2.3_pre5_sensitivity FIX -multiwii_2.0 for mobiDrone_2.3_pre5 -CRIUS SE What is the cause...
by ankimo
Sun May 13, 2012 1:09 am
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

The second test

A result is good! :)

mobiDroneOSD v2.3 PRE RELEASE 5 SENSITIVITY FIX

http://youtu.be/1akSAxpe8iA

winds:5m/s
1:39 ph
1.55 rth

Kazz
by ankimo
Sun May 06, 2012 1:07 pm
Forum: Software development
Topic: mobiDrone nano arduino OSD for MultiWii with PID config
Replies: 295
Views: 126207

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Hi It is the first test. Question - A pressure altitude does not display. - A horizon indicator (ROLL axis) is more sensitive than an actual motion (PITCH axis is OK). Request - I want a ground speed display. - latitude longitude display/undisplayed My Spec - Flyduino - Drotek 10dof - mobiDroneOSD v...
by ankimo
Sat Apr 28, 2012 2:50 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 880191

Re: GPS integration

Improved version of EOS Bandit's I2C GPS Code, Features: ⋅  9600 baud standard GPS switching code added, this MTK command switching the GPS module to 115200 baud. You can use same command set with any baudrate to 115200 ⋅  NMEA sentence configurator MTK command added. It is remo...
by ankimo
Tue Mar 20, 2012 7:21 am
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106985

Re: MultiWii 2.0 is coming

BMP085 does not work by mw2.0p3. Is it already ending with solution? In mw2.0p2, it works well. Flyduino Drotek 10DOF Kazz Hi, code for baro is identical between pre2 and pre3. what is exactly the problem ? Hi Alex I am sorry . It is my mistake. It had made a mistake in board selection. It solved. ...
by ankimo
Mon Mar 19, 2012 6:32 am
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106985

Re: MultiWii 2.0 is coming

BMP085 does not work by mw2.0p3.
Is it already ending with solution?
In mw2.0p2, it works well.

Flyduino
Drotek 10DOF

Kazz
by ankimo
Mon Jan 30, 2012 5:54 am
Forum: Software development
Topic: Improving Altitude Hold Performance
Replies: 98
Views: 61328

Re: Improving Altitude Hold Performance

Hi Adrian

Is it very stable :o
Is a version DEV_20120121?
Is a PID parameter sharable?

regards
kazz
by ankimo
Mon Jan 23, 2012 7:06 am
Forum: Software development
Topic: Improving Altitude Hold Performance
Replies: 98
Views: 61328

Re: Improving Altitude Hold Performance

Hi Alex

In dev_20111220, it is rightly effective.
dev_20120121 is tried tonight. ;)

regards
kazz
by ankimo
Sun Jan 22, 2012 11:57 am
Forum: Software development
Topic: Improving Altitude Hold Performance
Replies: 98
Views: 61328

Re: Improving Altitude Hold Performance

Hi

The problem was solved with the following parameter. :)
ALT:P 3.1 I 0.025 D 0
VEL:P 4.1 I 0.000 D 30
The altitude is stable at ±1 m.

regards
kazz
by ankimo
Fri Jan 20, 2012 7:36 am
Forum: Software development
Topic: Improving Altitude Hold Performance
Replies: 98
Views: 61328

Re: Improving Altitude Hold Performance

Hi ALL Write the first to board. A RTH success was carried out luckily. My MWC specification ・MOT CT1811 x4 ・ESC 6A x4 ・Props: 5x3 3-blade GWS ・FC FLYDUINO ・IMU DROTEC 10DOF ・GPS LOCOSYS 10Hz ・LIPO 2S800 ・Motor shaft distance: 250mm ・278g icl. battery & FPV equipment ・Endurance: 8 minutes One pr...