Search found 30 matches
- Wed Oct 07, 2015 7:22 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
There's a minimum 5 sat set generally in the code for FIX. Gps code is blocked if not FIX. I guess you can modify the limit if you want. But the thing is Planes use GPS also for altitude and a good 3D fix is a key. The number of the satellite also occurs to this phenomenon by 9. Reproducibility is ...
- Mon Oct 05, 2015 2:11 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
If the speed is lower than 5m/s it will increase throttle to force the plane forward. When speed and altitude is correct it will use cruise throttle setting. Hi PatrikE It was settled. gps - pachi wasn't being used. Let me question about one, please. When using a GPS of MTK3339 by I2C, a GPS doesn'...
- Mon Sep 28, 2015 9:17 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
I'm using the version of 140402 and a GPS of I2C connection.
The throttle value of the time of RTH is established low in GPS.h, but it's full throttle.
What is considered as the cause?
The height which is at the time of RTH operation is high sufficiently.
Thank you
The throttle value of the time of RTH is established low in GPS.h, but it's full throttle.
What is considered as the cause?
The height which is at the time of RTH operation is high sufficiently.
Thank you
- Tue Oct 07, 2014 1:49 pm
- Forum: Software development
- Topic: ios+multiwii,appstore release inside, check details, twitter
- Replies: 103
- Views: 694147
Re: ios+multiwii,appstore release inside, check details, twi
Hi
I am using TX of MODE1.
Under the present circumstances, TELEMETRY (RADIO) is not correct.
Is selection of MODE possible?
Thanks
Kazz
I am using TX of MODE1.
Under the present circumstances, TELEMETRY (RADIO) is not correct.
Is selection of MODE possible?
Thanks
Kazz
- Tue Oct 07, 2014 9:45 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
Hi PatrikE
I am using NanoWii and i2cGPS.
I want to display an altitude and a direction on OSD.
Where should the following code be added?
Regards
Kazz
I am using NanoWii and i2cGPS.
I want to display an altitude and a direction on OSD.
Where should the following code be added?
Code: Select all
#define FORCE_ALT_DISPLAY
#define FORCE_HEADING_GRAPH
Regards
Kazz
- Mon Feb 03, 2014 3:30 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
Hi
140109 was tried.
It seems that the distance to home of OSD is wrong as compared with 131225.
My test environment
i2c_GPS:I2C GPS NAV V2.2 Beta1 (R62)mod
OSD:KV_Team_OSD_2.2_20131221
Thank you
140109 was tried.
It seems that the distance to home of OSD is wrong as compared with 131225.
My test environment
i2c_GPS:I2C GPS NAV V2.2 Beta1 (R62)mod
OSD:KV_Team_OSD_2.2_20131221
Thank you
- Fri Jan 17, 2014 6:32 am
- Forum: Ideas
- Topic: Airplane mode RTH
- Replies: 824
- Views: 329568
Re: Airplane mode RTH
Hi
131225 did very good work.
https://www.youtube.com/watch?v=YWtXWg3MrmU
I try 140109 this weekend.
Thank you
Kazz
131225 did very good work.
https://www.youtube.com/watch?v=YWtXWg3MrmU
I try 140109 this weekend.
Thank you
Kazz
- Sun Nov 17, 2013 2:49 pm
- Forum: Software development
- Topic: ios+multiwii,appstore release inside, check details, twitter
- Replies: 103
- Views: 694147
Re: ios+multiwii,appstore release inside, check details, twi
configurator was terminated.
And connection was tried again.
The BOXES/AUX selective state was reflected this time.
Multiwii_BLE_115200.bin
no error message
How-to was read
uart speed:115200
mutiwii version:2.3
Hexacopter X on connect screen
Thank you
Kazz
And connection was tried again.
The BOXES/AUX selective state was reflected this time.
Multiwii_BLE_115200.bin
no error message
How-to was read
uart speed:115200
mutiwii version:2.3
Hexacopter X on connect screen
Thank you
Kazz
- Sun Nov 17, 2013 5:30 am
- Forum: Software development
- Topic: ios+multiwii,appstore release inside, check details, twitter
- Replies: 103
- Views: 694147
Re: ios+multiwii,appstore release inside, check details, twi
Hi
Since the BLE board arrived, it installed in 5S.
Bluetooth search is quickly comfortable!
However, a setup of BOXES/AUX is not reflected.
Have I made a mistake in usage?
Thank you
Kazz
Since the BLE board arrived, it installed in 5S.
Bluetooth search is quickly comfortable!
However, a setup of BOXES/AUX is not reflected.
Have I made a mistake in usage?
Thank you
Kazz
- Fri Jul 27, 2012 12:36 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Mr. MichalM_sk
The result of modification is very good!
Thank you
http://www.youtube.com/watch?v=Nm0M61-nrc4
The result of modification is very good!
Thank you
http://www.youtube.com/watch?v=Nm0M61-nrc4
- Tue Jul 24, 2012 8:07 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
MichalM_sk wrote:ankimo wrote:Pre7(FINAL)Test report
Probably the direction of home is reverse.
http://www.youtube.com/watch?v=y3wfyfLB9Qw
Kazz
I will check this problem.
Are other users OK?
Does my environment have a cause?
Kazz
- Sun Jul 22, 2012 1:55 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Pre7(FINAL)Test report
Probably the direction of home is reverse.
http://www.youtube.com/watch?v=y3wfyfLB9Qw
Kazz
Probably the direction of home is reverse.
http://www.youtube.com/watch?v=y3wfyfLB9Qw
Kazz
- Fri Jul 13, 2012 1:24 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Test report
HOME arrow loses its shape in OFF of latitude and longitude display.
Kazz
HOME arrow loses its shape in OFF of latitude and longitude display.
Kazz
- Fri Jul 06, 2012 4:17 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
It is wonderful!
I am ready for debugging always.
Kazz
I am ready for debugging always.
Kazz
- Wed Jul 04, 2012 1:04 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
>dont worry I am working on changes. I would like to release PRE7 this week.
It is wonderful.
The question about Radar screen
Possibly the position of a home display is a right-and-left contrary?
http://www.youtube.com/watch?v=d1FbfjryVxc
Kazz
It is wonderful.
The question about Radar screen
Possibly the position of a home display is a right-and-left contrary?
http://www.youtube.com/watch?v=d1FbfjryVxc
Kazz
- Wed Jun 27, 2012 2:17 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
- Mon Jun 18, 2012 10:49 am
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 887631
Re: GPS integration
Please give me advice.
A strange phenomenon occurs in the second half of RTH.
HOME-DIST is displayed as 1220m and a motion is also strange.
What is a cause?
http://www.youtube.com/watch?v=czejk3rw5ow
Kazz
A strange phenomenon occurs in the second half of RTH.
HOME-DIST is displayed as 1220m and a motion is also strange.
What is a cause?
http://www.youtube.com/watch?v=czejk3rw5ow
Kazz
- Sun Jun 17, 2012 8:17 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
GPS Speed has improved.
http://www.youtube.com/watch?v=QD9vHDfwUxc
Kazz
Code: Select all
speedTemp /= 100;
http://www.youtube.com/watch?v=QD9vHDfwUxc
Kazz
- Thu Jun 14, 2012 6:31 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi Mr.MichalM_sk
Is it dm/s?
It overflowed with the usual movement speed (about 30 km/h).
It is over 999.
Kazz
Is it dm/s?
It overflowed with the usual movement speed (about 30 km/h).
It is over 999.
Kazz
- Mon Jun 11, 2012 1:19 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi Mr.MichalM_sk
What should I do for displaying GPS Speed correctly in pre6?
Speed is not correctly displayed as well as Video of Mr.Y.Mita.
Kazz
What should I do for displaying GPS Speed correctly in pre6?
Speed is not correctly displayed as well as Video of Mr.Y.Mita.
Kazz
- Mon May 28, 2012 3:14 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi Mr.MichalM_sk In the following combination, serial communication is impossible. -mobiDrone_2.3_pre6 -multiwii_2.0 for mobiDrone_2.3_pre6 -CRIUS SE In the following combination, it is satisfactory. -mobiDrone_2.3_pre5_sensitivity FIX -multiwii_2.0 for mobiDrone_2.3_pre5 -CRIUS SE What is the cause...
- Sun May 13, 2012 1:09 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
The second test
A result is good!
mobiDroneOSD v2.3 PRE RELEASE 5 SENSITIVITY FIX
http://youtu.be/1akSAxpe8iA
winds:5m/s
1:39 ph
1.55 rth
Kazz
A result is good!
mobiDroneOSD v2.3 PRE RELEASE 5 SENSITIVITY FIX
http://youtu.be/1akSAxpe8iA
winds:5m/s
1:39 ph
1.55 rth
Kazz
- Sun May 06, 2012 1:07 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 127239
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi It is the first test. Question - A pressure altitude does not display. - A horizon indicator (ROLL axis) is more sensitive than an actual motion (PITCH axis is OK). Request - I want a ground speed display. - latitude longitude display/undisplayed My Spec - Flyduino - Drotek 10dof - mobiDroneOSD v...
- Sat Apr 28, 2012 2:50 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 887631
Re: GPS integration
Improved version of EOS Bandit's I2C GPS Code, Features: ⋅ 9600 baud standard GPS switching code added, this MTK command switching the GPS module to 115200 baud. You can use same command set with any baudrate to 115200 ⋅ NMEA sentence configurator MTK command added. It is remo...
- Tue Mar 20, 2012 7:21 am
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
BMP085 does not work by mw2.0p3. Is it already ending with solution? In mw2.0p2, it works well. Flyduino Drotek 10DOF Kazz Hi, code for baro is identical between pre2 and pre3. what is exactly the problem ? Hi Alex I am sorry . It is my mistake. It had made a mistake in board selection. It solved. ...
- Mon Mar 19, 2012 6:32 am
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
BMP085 does not work by mw2.0p3.
Is it already ending with solution?
In mw2.0p2, it works well.
Flyduino
Drotek 10DOF
Kazz
Is it already ending with solution?
In mw2.0p2, it works well.
Flyduino
Drotek 10DOF
Kazz
- Mon Jan 30, 2012 5:54 am
- Forum: Software development
- Topic: Improving Altitude Hold Performance
- Replies: 98
- Views: 61868
Re: Improving Altitude Hold Performance
Hi Adrian
Is it very stable
Is a version DEV_20120121?
Is a PID parameter sharable?
regards
kazz
Is it very stable
Is a version DEV_20120121?
Is a PID parameter sharable?
regards
kazz
- Mon Jan 23, 2012 7:06 am
- Forum: Software development
- Topic: Improving Altitude Hold Performance
- Replies: 98
- Views: 61868
Re: Improving Altitude Hold Performance
Hi Alex
In dev_20111220, it is rightly effective.
dev_20120121 is tried tonight.
regards
kazz
In dev_20111220, it is rightly effective.
dev_20120121 is tried tonight.
regards
kazz
- Sun Jan 22, 2012 11:57 am
- Forum: Software development
- Topic: Improving Altitude Hold Performance
- Replies: 98
- Views: 61868
Re: Improving Altitude Hold Performance
Hi
The problem was solved with the following parameter.
ALT:P 3.1 I 0.025 D 0
VEL:P 4.1 I 0.000 D 30
The altitude is stable at ±1 m.
regards
kazz
The problem was solved with the following parameter.
ALT:P 3.1 I 0.025 D 0
VEL:P 4.1 I 0.000 D 30
The altitude is stable at ±1 m.
regards
kazz
- Fri Jan 20, 2012 7:36 am
- Forum: Software development
- Topic: Improving Altitude Hold Performance
- Replies: 98
- Views: 61868
Re: Improving Altitude Hold Performance
Hi ALL Write the first to board. A RTH success was carried out luckily. My MWC specification ・MOT CT1811 x4 ・ESC 6A x4 ・Props: 5x3 3-blade GWS ・FC FLYDUINO ・IMU DROTEC 10DOF ・GPS LOCOSYS 10Hz ・LIPO 2S800 ・Motor shaft distance: 250mm ・278g icl. battery & FPV equipment ・Endurance: 8 minutes One pr...