Hi All,
I've been looking for similar functions myself.
Anybody been able to implement a simple Piezo Buzzer ?
Search found 62 matches
- Thu Apr 21, 2016 8:04 pm
- Forum: Ideas
- Topic: Alternative Buzzer signal generation for Piezo speakers?
- Replies: 6
- Views: 6930
- Tue Feb 23, 2016 8:17 pm
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
Re: Lynxmotion Quadrino Nano - UAV / Drones Flight Controlle
Hi All, We just release a quick new tutorial which explain the different steps involved to calibrate your UAV / Drone ESC (electronic speed controller). It cover the standard way but also the MultiWii procedure which does the calibration on all ESC's at once and the the right range of signal. http:/...
- Thu Jul 23, 2015 9:38 pm
- Forum: Software development
- Topic: MultiWii 2.4 - VBAT Alarms
- Replies: 3
- Views: 2525
Re: MultiWii 2.4 - VBAT Alarms
After more investigation, it turn out that only the buzzer pattern was to be changed.
Now it work just fine..
Now it work just fine..
- Wed Jul 22, 2015 1:39 am
- Forum: Software development
- Topic: MultiWii 2.4 - VBAT Alarms
- Replies: 3
- Views: 2525
Re: MultiWii 2.4 - VBAT Alarms
Thanks, just not sure why it was set to "vbatMin" instead of "analog.vbat" like the other levels.
Is that a mistake or there was an intended purpose for it..?
Is that a mistake or there was an intended purpose for it..?
- Mon Jul 20, 2015 6:27 pm
- Forum: Software development
- Topic: MultiWii 2.4 - VBAT Alarms
- Replies: 3
- Views: 2525
MultiWii 2.4 - VBAT Alarms
Hi All, I was doing a complete testing in order to make a tutorial around the VBAT and BUZZER on MultiWii and i found an issue. When the triggers are set for the different Levels, the "Critical" don't seems to do anything. What i found so far (and i'm not a programmer). In the Alarms.cpp t...
- Fri May 22, 2015 11:45 am
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
Lynxmotion UAV - FCT User Manual V1.0
Hi All, The Lynxmotion UAV - FCT User Manual V1.0 is now released. As always, constructive feedback's are appreciated. It start with a "Quick Start" section and than give you all the detailed information about the FCT. Since the FCT is an ongoing project, we will release new guides once we...
- Thu Apr 16, 2015 5:57 pm
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
Re: Lynxmotion Quadrino Nano - UAV / Drones Flight Controlle
Hi All, We are now shipping Lynxmotion Quadrino Nano Flight Controllers to everyone who Pre-Ordered this product. In fact we started shipping Tuesday (14-04-2015). You should receive a shipping confirmation by email very soon if you haven't already. At the same time, we released the first version of...
- Fri Mar 13, 2015 1:34 am
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
- Thu Feb 12, 2015 5:21 pm
- Forum: General discussions
- Topic: MultiWii 2.3 - Gimbal & TX Movement
- Replies: 0
- Views: 1079
MultiWii 2.3 - Gimbal & TX Movement
Hi All, Sorry if this has been discussed before, i didn't find relevant information so i opened a topic. In the past, i was using a MultiWii board as a simple Servo Gimbal stabilisation. This is quite simple. But i was using PPM receiver and found that i had control with my Potentiometer Knob to adj...
- Tue Nov 25, 2014 10:01 pm
- Forum: Ideas
- Topic: MultiWii based balancing robot (Segway)
- Replies: 35
- Views: 57201
Re: MultiWii based balancing robot (Segway)
That's a very nicely done project.
I will have to try it myself..
Thanks a lot for the hard work.
Eric Nantel - DiaLFonZo
I will have to try it myself..
Thanks a lot for the hard work.
Eric Nantel - DiaLFonZo
- Fri Oct 31, 2014 8:59 pm
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
- Fri Oct 31, 2014 8:58 pm
- Forum: Shields, boards and sensors
- Topic: Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
- Replies: 5
- Views: 8779
Lynxmotion Quadrino Nano - UAV / Drones Flight Controller
Hi All, We are, at Lynxmotion, very proud and exited to introduce a new UAV / Drones flight controller born from a partnership between the well known FlyingEinstein and Lynxmotion team. We focused on many things on that project: The Press Release: RobotShop Continues its Expansion in the UAV Market ...
- Fri Jan 24, 2014 3:49 pm
- Forum: Ideas
- Topic: VTail Configuration - Possible Update
- Replies: 11
- Views: 5568
Re: VTail Configuration - Possible Update
if interested in optimizing loop time, the do yourself a favour and calculate that sin(whatever) once with a calculator and put the resulting number in that define. I am not a programmer, i can understand basic things but that's all. Kipkool told me that the calculating of the angle was made by the...
- Thu Jan 23, 2014 6:53 pm
- Forum: Ideas
- Topic: VTail Configuration - Possible Update
- Replies: 11
- Views: 5568
Re: VTail Configuration - Possible Update
Kipkool gave me this modified version. It integrate the angle of the V for frames that have other angle. //New Kipkool mixing for DiaLFonZo/Bledi VTail's //In config.h you must define that line in order to get the new mixing and rotations //#define MY_PRIVATE_MIXING "NewVTail.h" //Edited b...
- Wed Jan 22, 2014 2:09 pm
- Forum: Ideas
- Topic: VTail Configuration - Possible Update
- Replies: 11
- Views: 5568
Re: VTail Configuration - Possible Update
Thanks guys. I have fly mine here with the mixing posted. With all four motor of the same size and KV (4 identical motor) and 4 of the same prop also, it fly solid and when you yaw it stay flat. The thing is, i don't want to need to tell people to hack the mix to get a good flight. I think it should...
- Tue Jan 21, 2014 10:08 pm
- Forum: Ideas
- Topic: VTail Configuration - Possible Update
- Replies: 11
- Views: 5568
VTail Configuration - Possible Update
Hi All, As a user of VTail frame, i would like to feel what others think. There is a bit of confusion around this config and teach people to use MultiWii for the first time and VTail also is a bit of a pain. On to of that there is different Hack around that (in my taste) improve a lot the capability...
- Fri Apr 26, 2013 1:16 am
- Forum: General discussions
- Topic: DJI PPM receiver - Compatibility
- Replies: 3
- Views: 1609
Re: DJI PPM receiver - Compatibility
I don't know if anybody else will be interested...
But anyway this is the result...
http://www.youtube.com/watch?v=lTpY31mgWLo
But anyway this is the result...
http://www.youtube.com/watch?v=lTpY31mgWLo
- Thu Apr 25, 2013 8:29 pm
- Forum: Shields, boards and sensors
- Topic: 1.3" display support i2c OLED from digole.com
- Replies: 6
- Views: 3329
Re: 1.3" display support i2c OLED from digole.com
Very interesting...
I have that board with i think is the same oled display.
HD Image
http://farm9.staticflickr.com/8117/8622193508_91843d14d9_o.jpg
Did you code anything to work ?
I have that board with i think is the same oled display.
HD Image
http://farm9.staticflickr.com/8117/8622193508_91843d14d9_o.jpg
Did you code anything to work ?
- Thu Apr 25, 2013 7:06 pm
- Forum: General discussions
- Topic: DJI PPM receiver - Compatibility
- Replies: 3
- Views: 1609
Re: DJI PPM receiver - Compatibility
timecop wrote:lol is that the shit from phantom?
Exacly it is...!
With a non ajustable TX.
Got it from a Classefield just to play with it.
- Thu Apr 25, 2013 3:15 pm
- Forum: General discussions
- Topic: DJI PPM receiver - Compatibility
- Replies: 3
- Views: 1609
DJI PPM receiver - Compatibility
Hi All, I posted my question on RCgroups but i think there is not much people there now.. lol I would like to know if anybody ever try a DJI PPM Receiver on MultiWii ? In the meantime i have soldered it to my board and to a test soon, when i have the time.. lol I would like to use that for a micro Q...
- Sat Jan 05, 2013 2:06 pm
- Forum: Software development
- Topic: Changing PPM sum input pin.
- Replies: 13
- Views: 11335
Re: Changing PPM sum input pin.
Hi all, I would like to make you aware that the development release r1240 supports the change of the PPM sum input pin. This feature can be enabled by uncommenting the line #define PPM_ON_THROTTLE in the file config.h. As a result of this change, the sum input has to be made avaliable at the standa...
- Tue Jan 01, 2013 5:09 pm
- Forum: Software development
- Topic: Changing PPM sum input pin.
- Replies: 13
- Views: 11335
Re: Changing PPM sum input pin.
Hi copterrichie, Do you think the thing is doable if the motor output pin is changed ? Since i am not a programmer, just understand basic of programmation, could you do a sample multiwii file so i can test it ? Thanks a lot http://www.multiwii.com/forum/viewtopic.php?f=15&t=2888&p=28553#p285...
- Tue Jan 01, 2013 5:07 pm
- Forum: Connecting elements
- Topic: PPM - Pin change to another
- Replies: 6
- Views: 3415
Re: PPM - Pin change to another
Ive been reading that topic but im not sure if it applies to this? Hes trying to use an output pin as an input pin, but were just trying to get it to move from one input to another? I already posted as well, all I got was an odd response though. :') http://www.multiwii.com/forum/viewtopic.php?f=6&a...
- Tue Jan 01, 2013 4:43 pm
- Forum: Connecting elements
- Topic: PPM - Pin change to another
- Replies: 6
- Views: 3415
Re: PPM - Pin change to another
I found that thread while searching
viewtopic.php?f=8&t=1625
viewtopic.php?f=8&t=1625
- Tue Jan 01, 2013 4:38 pm
- Forum: Connecting elements
- Topic: PPM - Pin change to another
- Replies: 6
- Views: 3415
PPM - Pin change to another
Hi All, I have a friend that need to relocate his PPM input signal to another pin cause the board broke at that point. Is there any way to change the pin to any other normal RX input pins ? I have search but can't find how it's done in the software. My skills in programming are limited. I found : #d...
- Wed Sep 12, 2012 1:55 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
I have see (with my eyes) Johny yesterday.
I know he face a lot of proplem in the last couple of month..
I know he face a lot of proplem in the last couple of month..
- Mon Sep 10, 2012 3:41 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
Hi JohnyGab,
Can you make a simple stock Multiwii 2.1 file that work with the Rushduino OSD.. ?
So we can all start from there.
Thanks for a fast answer
Eric Nantel
DiaLFonZo-Copter
info@dialfonzo-copter.com
Can you make a simple stock Multiwii 2.1 file that work with the Rushduino OSD.. ?
So we can all start from there.
Thanks for a fast answer
Eric Nantel
DiaLFonZo-Copter
info@dialfonzo-copter.com
- Wed Aug 15, 2012 4:27 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
I didn't follow for a while.
But is there compatibility with Multiwii 2.1 now ?
But is there compatibility with Multiwii 2.1 now ?
- Sun Jul 15, 2012 8:45 pm
- Forum: Shields, boards and sensors
- Topic: Nano Brushed Board!
- Replies: 23
- Views: 13963
Re: Nano Brushed Board NEED HELP!
Très beau..
Faudrais que je regarde si j'en ai un autre qui traine. J'en ai un sur mon MicroQuad.
Faudrais que je regarde si j'en ai un autre qui traine. J'en ai un sur mon MicroQuad.
- Sun Jul 15, 2012 5:59 am
- Forum: Shields, boards and sensors
- Topic: Nano Brushed Board!
- Replies: 23
- Views: 13963
Re: Nano Brushed Board NEED HELP!
I am following but don't know for the MPU
Put some pictures..
Put some pictures..
- Sun Jun 17, 2012 11:47 am
- Forum: Shields, boards and sensors
- Topic: Nano Brushed Board!
- Replies: 23
- Views: 13963
Re: Nano Brushed Board NEED HELP!
Let us know..
- Fri Jun 15, 2012 11:06 am
- Forum: Shields, boards and sensors
- Topic: Nano Brushed Board!
- Replies: 23
- Views: 13963
Re: Nano Brushed Board NEED HELP!
Wow.. nice board..
- Tue May 22, 2012 1:55 am
- Forum: Software development
- Topic: LED Ring I2C device
- Replies: 97
- Views: 37155
Re: LED Ring I2C device
chilled wrote:eBay or Dfrobot, which is the best source?
DFrobot is the maker... so i would say there.
Mine came direct from them.
- Thu Apr 05, 2012 1:21 am
- Forum: Shields, boards and sensors
- Topic: Maple 32-Bit Arduino board
- Replies: 2
- Views: 1824
Re: Maple 32-Bit Arduino board
Yes i have see that one..
Both ARM processor so.. in somewhere.. they will be same
Both ARM processor so.. in somewhere.. they will be same
- Wed Apr 04, 2012 9:36 pm
- Forum: Shields, boards and sensors
- Topic: Maple 32-Bit Arduino board
- Replies: 2
- Views: 1824
Maple 32-Bit Arduino board
Hi All,
I am not a programmer.. so that said
Anyone think that going with a 32-bit arduino would be a good idea.
Thinking of the faisability of the thing...
Link
http://www.robotshop.com/productinfo.aspx?pc=RB-Lea-01&lang=en-US
http://leaflabs.com/devices/#Maple
I am not a programmer.. so that said
Anyone think that going with a 32-bit arduino would be a good idea.
Thinking of the faisability of the thing...
Link
http://www.robotshop.com/productinfo.aspx?pc=RB-Lea-01&lang=en-US
http://leaflabs.com/devices/#Maple
- Thu Mar 15, 2012 8:52 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
I have two that are availible if anyone want one..
- Thu Mar 15, 2012 3:59 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
Bledi wrote:normal je lui file des coup de pieds au c...
LOL
Il faut que j'ai cette version 8...!!
- Thu Mar 15, 2012 3:39 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
Re: Rushduino OSD - Multiwii based open software osd
WOW... !
Tu as fais des progrès enorme depuis la dernière fois que j'ai regardé...!!!!!
Tu as fais des progrès enorme depuis la dernière fois que j'ai regardé...!!!!!
- Sun Jan 29, 2012 3:18 pm
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
Thanks..!
Need to re-assemble my 500 before trying
Need to re-assemble my 500 before trying
- Sun Jan 22, 2012 8:56 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 246485
- Fri Jan 20, 2012 12:41 pm
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
Thanks, but i don't want to use it wit FBL right now.
Just normal flybar to have "AutoLevel" feature..
Just normal flybar to have "AutoLevel" feature..
- Tue Jan 17, 2012 3:31 pm
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
120deg CCPM swashplate.
I will test it on ground without motor anyway...
I didn't dig into the code yet.. but is the motor going to MultiWii or not ?
I will test it on ground without motor anyway...
I didn't dig into the code yet.. but is the motor going to MultiWii or not ?
- Tue Jan 17, 2012 3:19 pm
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
Ok
Mine don't have any vibrations, everything is balanced.
A lot less than my MultiCopter.. lol
Have to look and try...
Mine don't have any vibrations, everything is balanced.
A lot less than my MultiCopter.. lol
Have to look and try...
- Tue Jan 17, 2012 1:19 pm
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
Hi, I have stopped my tests because of oscillations on cyclic servos and have not returned to those tests after exploded head on HK-450. The funny part it is that now you can get true FBL unit that is cheaper than Arduino and WM+ m Regards Andrej Yes i know, but i have already "Many" Mult...
- Tue Jan 17, 2012 2:59 am
- Forum: Ideas
- Topic: MultiWii as CP Helicopter FBL (or just stabilization)?
- Replies: 56
- Views: 34042
Re: MultiWii as CP Helicopter FBL (or just stabilization)?
Anybody ever fly it finaly ??
- Mon Jan 16, 2012 11:45 pm
- Forum: Ideas
- Topic: MultiWii on a T-Rex 500 (or other)
- Replies: 1
- Views: 1321
MultiWii on a T-Rex 500 (or other)
Hi all,
Just wonder if anybody ever port the multiwii to an Helicopter purpose ?
Like auto level ... i would like to try that on my t-rex...
Eric
Just wonder if anybody ever port the multiwii to an Helicopter purpose ?
Like auto level ... i would like to try that on my t-rex...
Eric
- Sun Jan 15, 2012 9:32 pm
- Forum: Software development
- Topic: arduino pwm output frequencys
- Replies: 43
- Views: 14492
Re: arduino pwm output frequencys
KeesvR wrote:I'm a happy person who made you happy.
HéHé...
I'm really happy now..!
350mb of video take time to upload..
Curiously that DEV version feel more stable than the 1.9
- Sun Jan 15, 2012 9:09 pm
- Forum: Software development
- Topic: arduino pwm output frequencys
- Replies: 43
- Views: 14492
Re: arduino pwm output frequencys
A big thanks to ronco and other who may have work for that mod...!
Awesome it fly just as it should.
Camera Stabilisation A0 and A1
HEX configuration with motor on pin5 and pin6
Uploading a video and will add it.
Sorry but my servo have some play so the cam move a bit..
UPLOADED....!!!
http://www.youtube.com/watch?v=MJghxAHC ... e=youtu.be
Awesome it fly just as it should.
Camera Stabilisation A0 and A1
HEX configuration with motor on pin5 and pin6
Uploading a video and will add it.
Sorry but my servo have some play so the cam move a bit..
UPLOADED....!!!
http://www.youtube.com/watch?v=MJghxAHC ... e=youtu.be
- Sun Jan 15, 2012 8:03 pm
- Forum: Software development
- Topic: arduino pwm output frequencys
- Replies: 43
- Views: 14492
Re: arduino pwm output frequencys
Tested Motors but don't look to have any signal on 5 and 6 ESC are beeping like no signal and don't spin when the copter is armed. I attach my config files ok.. you are using the wrong (old and not working) output.ino code... use this one http://www.multiwii.com/forum/viewtopic.php?f=8&t=1069&a...
- Sun Jan 15, 2012 7:42 pm
- Forum: Software development
- Topic: arduino pwm output frequencys
- Replies: 43
- Views: 14492
Re: arduino pwm output frequencys
Tested Motors but don't look to have any signal on 5 and 6
ESC are beeping like no signal and don't spin when the copter is armed.
I attach my config files
ESC are beeping like no signal and don't spin when the copter is armed.
I attach my config files