Search found 9 matches

by rojowe
Fri Apr 08, 2016 5:36 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1160253

Re: Direct Frsky telemtry data from MW FC

Can anyone point me in the right direction? Am I to add the bits of code to Multiwii 2.4 myself or is there already some integration? I have a Turnigy 9XR Pro w/ FrSky DJT and basic telemetry such as RSSI & TSSI. Then through Multiwii 2.4 and MWOSD I have GPS, Altitude, Speed, etc... I understan...
by rojowe
Fri Apr 08, 2016 5:36 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1160253

Re: Direct Frsky telemtry data from MW FC

Can anyone point me in the right direction? Am I to add the bits of code to Multiwii 2.4 myself or is there already some integration? I have a Turnigy 9XR Pro w/ FrSky DJT and basic telemetry such as RSSI & TSSI. Then through Multiwii 2.4 and MWOSD I have GPS, Altitude, Speed, etc... I understan...
by rojowe
Fri Dec 04, 2015 5:16 pm
Forum: General discussions
Topic: Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???
Replies: 3
Views: 2391

Re: Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???

Perfect! Well, I had to switch the +/- signs as you suggested I may have to.

PatrickE - Thank you for all you've done with Multiwii!
by rojowe
Fri Dec 04, 2015 12:31 am
Forum: General discussions
Topic: Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???
Replies: 3
Views: 2391

Re: Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???

For the day someone else searches for something similar...I have settled with elevator and aileron only at the moment. The code was quite easy to alter....integrating the rudder controls shouldn't be very difficult, I need to look into the Flying wing to see how they are controlling Aileron/Elevator...
by rojowe
Thu Dec 03, 2015 3:07 am
Forum: Shields, boards and sensors
Topic: Multiwii 2.4 Ublox Neo 6m Setup??
Replies: 5
Views: 5312

Re: Multiwii 2.4 Ublox Neo 6m Setup??

Thank you, you've been very helpful. Looks like its time to do a bit more testing with the MAG sensor. Any knowledge about Servo Mixing in Multiwii? I started another thread in Gen. Discussion. I've got a V-Tail plane. but for the life of me, cannot figure out how to modify the code to use the rudde...
by rojowe
Thu Dec 03, 2015 2:40 am
Forum: Shields, boards and sensors
Topic: Multiwii 2.4 Ublox Neo 6m Setup??
Replies: 5
Views: 5312

Re: Multiwii 2.4 Ublox Neo 6m Setup??

Thanks for your response, perhaps I should have been clearer. - Clone Mega 2560 - #define GPS_SERIAL 2 - #define GPS_BAUD 57600 - #define UBLOX , also tried #define NMEA (honestly haven't looked into the differences or which I need to be dealing w/ therefor tried both, same lack of results) - Mag De...
by rojowe
Wed Dec 02, 2015 11:18 pm
Forum: Software development
Topic: Airplane mode
Replies: 512
Views: 211436

Re: Airplane mode

Can anyone help explain how to set up a V-Tail in Multiwii 2.4?

Or is it possible to only use aileron and elevator, but use the rudder servo as the 2nd elevator servo?


Thanks for any help, hopefully someone is still active and able to help.
by rojowe
Wed Dec 02, 2015 11:13 pm
Forum: Shields, boards and sensors
Topic: Multiwii 2.4 Ublox Neo 6m Setup??
Replies: 5
Views: 5312

Multiwii 2.4 Ublox Neo 6m Setup??

So I've got everything connected correctly, however I have not configured the NEO-6M in U-Center, but I do have access if I need to. My understanding is that the MW code should format the GPS to work during initialization. I'm seeing the compass blink on the MultiWii Config, but I'm not getting any ...
by rojowe
Wed Dec 02, 2015 11:08 pm
Forum: General discussions
Topic: Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???
Replies: 3
Views: 2391

Multiwii 2.4 Airplane V-Tail or 2 Servo Elevator???

Hey! So I've got my plane built, FF Foam Predator, if you were wondering. Im certainly having some issues overall, but I've almost got everything to the point where I can actually start flying FPV. 1st and biggest problem I'm having is setting up the V-Tail. I could mix through the Tx, but obviously...