Search found 31 matches

by amourdurisk
Sun Dec 09, 2012 2:44 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1378122

Re: Naze32 hardware discussion thread

Hello,

Can i use Naze32 with octocopter X8 configuration ? (with serial ppm receiver)
thank you

Matt.
by amourdurisk
Fri Aug 24, 2012 8:39 am
Forum: Shields, boards and sensors
Topic: Do you have any instruction notice about 3M Pilot card?
Replies: 3
Views: 1831

Re: Do you have any instruction notice about 3M Pilot card?

In fact I've already asked GBL about it before ( and they don't have any notice to supply with). I thought this card was well known, but there is the link in case you wanna see the whole description and pictures : http://www.goodluckbuy.com/3m-pilot-multiwii-mwc-flight-controller-u-blox-lea-5h-gps-r...
by amourdurisk
Thu Aug 23, 2012 5:58 pm
Forum: Shields, boards and sensors
Topic: Do you have any instruction notice about 3M Pilot card?
Replies: 3
Views: 1831

Do you have any instruction notice about 3M Pilot card?

Hello, I bought this card on Goodluckbuy but they didn't supply any information about how to connect motors, sensors, etc... I made some tests on Multiwiiconf, without any success... If someone could tell me how to connect things or if someone has a notice, a drawing or any other explanation, it wou...
by amourdurisk
Tue Apr 24, 2012 9:15 pm
Forum: Software development
Topic: [bug] MPU6050 DLPF setting has no effect
Replies: 30
Views: 22962

Re: [bug] MPU6050 DLPF setting has no effect

Hello,
it's been 2 months I noticed that the lpf on the mpu did not work: http://www.multiwii.com/forum/viewtopic.php?f=8&t=1080&start=30#p9589
This is good news to see that FAX8 found a solution.
Thx a lot :)

Matt
by amourdurisk
Fri Apr 20, 2012 8:42 am
Forum: Connecting elements
Topic: is there a How TO for the I2C GPS ?
Replies: 4
Views: 2527

Re: is there a How TO for the I2C GPS ?

Thank you PatriKe,

I'll try that as soon as possible.
regards,

Matt.
by amourdurisk
Thu Apr 19, 2012 9:19 pm
Forum: Connecting elements
Topic: is there a How TO for the I2C GPS ?
Replies: 4
Views: 2527

Re: is there a How TO for the I2C GPS ?

Thx keesvR,

all is ok but the NUM SAT is always = 0
i don't have I2C error, i use this GPS : http://www.drotek.fr/shop/fr/70-gps-pa6c-llc.html
any idea ?

Matt.
by amourdurisk
Thu Apr 19, 2012 9:03 am
Forum: Connecting elements
Topic: is there a How TO for the I2C GPS ?
Replies: 4
Views: 2527

is there a How TO for the I2C GPS ?

Hello everybody,

I'm looking for a HOW TO for the I2C GPS
if anyone has any links or explanations I'm interested
Thanks

Matt.
by amourdurisk
Tue Mar 27, 2012 10:48 pm
Forum: Software development
Topic: "Arduino" Pro Micro
Replies: 131
Views: 69717

Re: "Arduino" Pro Micro

There are also in arduino 1.0
but i'm talking about the driver for the USB, i found only for windows.
regards
MAtt.
by amourdurisk
Tue Mar 27, 2012 7:37 pm
Forum: Software development
Topic: "Arduino" Pro Micro
Replies: 131
Views: 69717

Re: "Arduino" Pro Micro

Hi ronco,

Do you think we can hope to have a driver for OS X soon?

Great job ;)

Matt.
by amourdurisk
Tue Mar 27, 2012 7:53 am
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

If you don't use it how you can know if LPF is working or not for you ?
by amourdurisk
Mon Mar 26, 2012 7:41 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

which lpf do you use dongs ?
by amourdurisk
Mon Mar 26, 2012 5:47 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

i have found someone like me who think that the LPF with MPU has no effect
Here http://www.rcgroups.com/forums/showpost.php?p=20902329&postcount=2859

someone else has the same problem?

Matt.
by amourdurisk
Mon Mar 26, 2012 5:02 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Hi didlawowo69,

I test ITG3200+bma180 and MPU6050, in my case, I find that itg3200 is less sensitive to vibration so I had better results with itg
Would require other users MPU say what they think

Matt.
by amourdurisk
Wed Feb 29, 2012 5:05 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Our initial tests showed that the MPU6050 is quite more stable than the ITG3200.. does the readings seem ok in the GUI?? Hi fax8, All the readings seems ok in the GUI. it seems to be more sensitive to vibrations than the ITG. I feel that the LPF is not effective on the MPU. When I turn off the LPF ...
by amourdurisk
Wed Feb 29, 2012 9:13 am
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Hello,

I have some question about the LPF with the MPU6050.
My quad flies very well with ITG3200 and LPF42hz but really badly with same setting and the MPU6050.
I tried All LPF but no way.
Anyone have an idea ? anyone have the same problem ?
regards,

MAtt.
by amourdurisk
Mon Feb 27, 2012 9:57 am
Forum: Software development
Topic: "Arduino" Pro Micro
Replies: 131
Views: 69717

Re: "Arduino" Pro Micro

Nice job ;p

in the multiwii source, i can't read the file "connecting promicro.jpg" an idea ?

Matt.
by amourdurisk
Mon Feb 06, 2012 9:34 pm
Forum: Software development
Topic: Multiwii port to STM32 and place to ask stupid questions
Replies: 38
Views: 22366

Re: Multiwii port to STM32 and place to ask stupid questions

Nice hover ;)

Do you think i can use your code on a chipkit uno32 ?
good luck for the futur

Matt.
by amourdurisk
Sun Feb 05, 2012 3:23 pm
Forum: Software development
Topic: Multiwii port to STM32 and place to ask stupid questions
Replies: 38
Views: 22366

Re: Multiwii port to STM32 and place to ask stupid questions

Very nice job Dongs,
I am excited to see what happens in flight :)
Do you share the code ?

Matt.
by amourdurisk
Mon Jan 09, 2012 6:58 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Thank you for the links ;)

CDIweb ship only to canada mexico usa ..... grrrr
Sparkfun backordered again and again ..
by amourdurisk
Sun Jan 08, 2012 12:53 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

i think they took the BOB of the ITG3200 ....
anyway i don't want BOB but only the device so 35€ for the device is a little expensive :/
by amourdurisk
Sat Jan 07, 2012 11:55 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Yeahh, thanks again fax8, now it's ok ;)

Do you know where i can find MPU6050 ? i took mine at www.drotek.fr but it's very expensive.
regards,

Matt.
by amourdurisk
Sat Jan 07, 2012 1:34 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

hi fax8,

thank you for your help ;)
I took files in this directory : http://code.google.com/p/multiwii/source/browse/#svn%2Ftrunk%2FMultiWii but i don't know where i can find the multiwiiconf.app for mac ?
otherwise i will wait for your package ;)
by amourdurisk
Fri Jan 06, 2012 7:22 pm
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Thx alex,

but which version do you use ?
with the dev_20111220, nothing happen when i push Start button. Any idea ?

Matt.
by amourdurisk
Thu Jan 05, 2012 12:07 am
Forum: Software development
Topic: Support for MPU6050
Replies: 96
Views: 218035

Re: Support for MPU6050

Thanks a lot fax8
i make the modif but after a CALIB_ACC Z axis goes crazy.
do you have the same mistake ?

Matt.
by amourdurisk
Sun Dec 11, 2011 2:55 pm
Forum: Shields, boards and sensors
Topic: MPU 6050
Replies: 1
Views: 1715

MPU 6050

Hello,

I have made a PCB for the mpu 6050 but i don't know how implement the code for this sensor.
I need your help ;)
Thanks

Matt.
by amourdurisk
Sat Nov 26, 2011 12:01 pm
Forum: Shields, boards and sensors
Topic: BMA180
Replies: 9
Views: 4339

Re: BMA180

Hey Matt, thank you very much for your support. Someone from germany might be more comfortable for me, cause I'm not sure about shipping cost to Paris, but maybe I'll use your offer. Thank you really very much. Maybe we can continue in a personal message. Neat regards Carsten No prob, i have 2 brea...
by amourdurisk
Fri Nov 25, 2011 5:18 pm
Forum: Shields, boards and sensors
Topic: BMA180
Replies: 9
Views: 4339

Re: BMA180

It's OK for me,
if you want to send me the sensors, my address is :
bancourt matthieu
26 rue de rochechouart
75009 PARIS

let me know

Matt .
by amourdurisk
Fri Nov 25, 2011 9:39 am
Forum: Shields, boards and sensors
Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
Replies: 47
Views: 19850

Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$

i'm selling all in one too but with the atmega328p in the same card:
Image

115€ with shipping
by amourdurisk
Fri Nov 25, 2011 9:27 am
Forum: Shields, boards and sensors
Topic: BMA180
Replies: 9
Views: 4339

Re: BMA180

Hello,

I can solder the sensor but do you have the pcb ?
otherwise can you have more sensor bma180 for a good price ?
cordially

ADR.
by amourdurisk
Thu Nov 03, 2011 5:46 pm
Forum: Ideas
Topic: port code to chipkit uno32 ??
Replies: 6
Views: 3079

Re: port code to chipkit uno32 ??

Hi Alex,

Do you think it would bring something more?

Ps : As-tu eu le temps pour la version hélicoptère ?

regards,

Matt.
by amourdurisk
Wed Nov 02, 2011 9:04 pm
Forum: Ideas
Topic: port code to chipkit uno32 ??
Replies: 6
Views: 3079

port code to chipkit uno32 ??

I wonder if we could put the Alex program on a chipkit 32 Uno?

Thanks a lot

Matt.