Search found 5 matches

by ampere-dieter
Wed Jan 25, 2012 11:00 am
Forum: Software development
Topic: OCTO ProMini, 11Bit PWM, 0.5us RX Resolution
Replies: 10
Views: 4316

Re: OCTO ProMini, 11Bit PWM, 0.5us RX Resolution

hi Felix,

if you use OCTO with normal receivers (even for test only), than ports D4, D5, D6, D7 are outputs for the motors.
What happend with your connected receiver???

regards, dieter
by ampere-dieter
Wed Jan 25, 2012 10:25 am
Forum: Software development
Topic: OCTO ProMini, 11Bit PWM, 0.5us RX Resolution
Replies: 10
Views: 4316

Re: OCTO ProMini, 11Bit PWM, 0.5us RX Resolution

hi Felix, you can get the error message "to use OCTO with serial RX, you MUST use and configure SUM_PPM-/Spektrum_SAT-/SBUS-receiver or BTSERIAL" only if you set a #define OCTO in config.h. For your setup you have to uncomment a #define QUARDX / #define QUARDP in config.h. I changed only t...
by ampere-dieter
Wed Jan 25, 2012 1:15 am
Forum: Software development
Topic: OCTO ProMini, 11Bit PWM, 0.5us RX Resolution
Replies: 10
Views: 4316

OCTO ProMini, 11Bit PWM, 0.5us RX Resolution

hello all, I would like to inform you about my work to make Alex famous MultiWii software a little bit better. Alex, you did a great job. Originally I want to optimize the servo outputs only, but by the time it becomes a little bit more. Then came out: * PROMINI: 16 bit very low-jitter software PWM ...
by ampere-dieter
Sat Dec 10, 2011 11:01 am
Forum: ESCs, propellers , servos and radios
Topic: Alternative ESC firmware (reflashing)
Replies: 640
Views: 336388

Re: Alternative ESC firmware (reflashing)

Hi ziss_dm, thanks for your helps. I have edit a hw file for the Turbojet60A. Please have a look on it. I'm not quite shure about port inits and AnRef. For the first step I want to use normal setup conditions. "Turbojet60A.inc" see here: http://www.modfly.de/media/TorboJet60A_nFET.zip Wher...
by ampere-dieter
Thu Dec 08, 2011 10:38 pm
Forum: ESCs, propellers , servos and radios
Topic: Alternative ESC firmware (reflashing)
Replies: 640
Views: 336388

Re: Alternative ESC firmware (reflashing)

Hi Everyone, great work of all members here. Thanks. for a VTOL project with EDF I need 40A+ ESC. The Turbojet 60A seems to be a good candidate for this job. Because we have for hoovering high currents I want to modify the ESC. For this setup activ freerun mode is used, or PWM with the hi-Fets. The ...