MultiWii

@kataventos, @QuadBow
If you have time maybe you can help me with the code ready , with the latest changes from QuadBow

Thanks

Best Regards
Cosmin Miscu

@kataventos

Thanks for help me
We introduced new settings and is ok. I was terrible at the modified code in arduino

Thanks

Best Regards
Cosmin Miscu

It gives me error loading the r1391. Does anyone know why? FrSkyTelemetry.ino: In function 'void send_Altitude()': FrSkyTelemetry:251: error: 'EstAlt' was not declared in this scope FrSkyTelemetry:254: error: 'EstAlt' was not declared in this scope FrSkyTelemetry.ino: In function 'void send_Course()...

Hello
I have a problem with the video voltage, voltage not show me, on MinimOSD
I respected exactly "hardware mods".
It's a software bug?

Thanks

Hello
Can you help me?
I tied Ultralight 50A Current Sensor (pin S) N1 entry, set sensor 3 and I have a problem.
As I powered quad starts and counts 20-30mAh/sec and shows consumption of 25-30A engines find Not started.
Do you know why?
Thanks

Hamburger,
I took your advice and I do
Thanks

Please help me
How set v_bat for 4S in code ?
V in it is 16,8v, my rezistor it is R1 29K, R2 69K Vout it is 4.971
Thanks

I can send someone ready assembled code. I tried to assemble it but I do not show anything on the station and I want to remove the software problem.
PS : We solved. The code was ok. I used MAX232 and I do not connect well with him.
Now where it can bind FAS-100 or FLVS-01
Thank you

Hello
Who can update the file "I2C_GPS_NAV.ino", with the changes?
I'm not good at programming, I did strap on pin 13/14 and I do not show GPS data in GUI

Thanks

Hello Returning again to the same problem, correct orientation of the sensors for 2.0 MW rel2, direction of flight to led Orientation of the 1.9 does not work I struggled a bit and got it #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -Y; accADC[PITCH] = X; accADC[YAW] = -Z;} #define GYRO_ORIENTA...

Hello Returning again to the same problem, correct orientation of the sensors for 2.0 MW rel2, direction of flight to led Orientation of the 1.9 does not work I struggled a bit and got it #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -Y; accADC[PITCH] = X; accADC[YAW] = -Z;} #define GYRO_ORIENTA...

Hello Returning again to the same problem, correct orientation of the sensors for 2.0 MW rel2, direction of flight to led Orientation of the 1.9 does not work I struggled a bit and got it #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = -Y; accADC[PITCH] = X; accADC[YAW] = -Z;} #define GYRO_ORIENTAT...

bob4432 wrote:I think for the $$ you spent, drotek should be assisting you, I would contact them if I were you.

If the producer gave me this information, may not appeal to this forum for help
PS: We suspect that the forum is to help, not condemn me I bought and where, thanks anyway

Sorry for my bad english , can someone help me?

Hello I have IMU 9DOF from Dorotek m, and do not know if I set the correct orientation sensors that fail to align the arrow bin Front compass, rotate the plate and gave a momen skips arrow of the compass (N) Please help me The correct orientation it is: //if you want to change to orientation of indi...

Can someone help? Must write a specific code or modify the code, if so please guide me, I would have three sensors and one I use for my Quad
Thanks

Hello
Can I connect LIS302DL ACChttp://www.sparkfun.com/products/8658 ? I have 3 sensors and I was wondering if you can use in this project with arduino pro mini, and if so how to do that if you help me?

Thanks