MultiWii

Hope you figure it out... While thinking about it further, maybe my original advice was wrong. Shifting the motors may be a better approach... so move M3 to M4 and M4 to M5. Nevermind, I used my FTDI device to install cleanflight in my CC3D, and its running great with oneshot enable... I flew that ...

Well, I manage to make that work using cmix 6 1 1 1 1 , don't ask why... Anyway... Everything working, motor direction, order, etc, radio commands on, and now: My motors are not turning when Im using the radio... heres my video showings everything seems OK... I really don't know what else to do...lo...

You can use a custom mix to move ESC header 3 to a good header. The below moves M4 to M5. You'll need to replace the "cmix 5" line with the M3 mixer information (listed after "cmix load quadx" command). Here's the basic commands necessary: mixer custom cmix load quadx cmix 5 1 1...

Guys, I replaced my board and the ESC header 3 is dead... any ESCs connected to that ESC header won't work... I flashed the firmware twice with full chip erase and flash slowly ticked...nothing... Do you guys think there anything that I can do to use other outputs(like 5 or 6? avoiding 3) with CLI c...